REVISION K
DESIGNED & DIMENSIONED
IN MILLIMETERS [INCHES]
(TEM-110-02-03.0-XX-D SHOWN)
BODY OPTION
FIG 1
K
TEMX-1XX-XX-XX.X-XX-D-XX-XX
OPTION
-TR: TAPE & REEL
-K: POLYIMIDE FILM
(USE K-500-300, SEE FIG 5, SHT 2)
DO NOT
SCALE FROM
THIS PRINT
(LEAVE BLANK IF OPTION NOT USED)
S: SLIM
(NOT AVAILABLE WITH -A, -LC, OR -WT)
(USE TEMS-XX-XX.X, SEE FIG 6, SHEET 2)
(ONLY AVAILABLE WITH -K-TR)
No OF POSITIONS
02
-05 THRU -50 (PER ROW)
(5 POS INCREMENTS)
-02: SURFACE MOUNT
OPTION
LEAD STYLE
5.00 .197
REF
3.50 .138
REF
-03.0: (6MM STACK HEIGHT) (T-1M58-03.0-XX)
-04.0: (7MM STACK HEIGHT) (T-1M58-04.0-XX)
-07.0: (10MM STACK HEIGHT) (T-1M58-07.0-XX)
STACK HEIGHT
-A: ALIGNMENT PIN (SEE FIG 2, SHEET 2)
(NOT AVAILABLE WITH -LC OR -WT)
(NOT AVAILABLE WITH TEMS)
-LC: LOCKING CLIP (SEE FIG 3, SHEET 2)
(NOT AVAILABLE WITH -A OR -WT)
(NOT AVAILABLE WITH TEMS)
-WT: WELD TAB (SEE FIG 4, SHEET 2)
(NOT AVAILABLE WITH -A OR -LC)
(NOT AVAILABLE WITH TEMS)
01
0.25 .010
REF
K
PLATING SPECIFICATION
-H: 30µ" HEAVY GOLD IN CONTACT AREA
3µ" ON TAIL
-G: 10µ" GOLD IN CONACT AREA
3µ" ON TAIL
-FG: 3µ" FLASH GOLD ON ENTIRE
TERMINAL
(No. OF POS x 0.800) + 5.000 .196 REF
(No. OF POS x 0.800[.0315]) + 9.000[.3543] REF
3.05 .120
REF
(SEE NOTE 5)
C
-D: DOUBLE ROW
ROW SPECIFICATION
SLOT
(SEE NOTES 5 & 6)
FIRST POSITION
INDICATOR
5.45 .215
REF
(SEE NOTE 5)
(No. OF POS -1) x 0.800±0.130 .0315±.005
"A"
2 MAX SWAY
(TYP)
C
1.600 .063
2 MAX TOE
(TYP)
C
0.86 .034
REF
(SEE NOTE 5)
"B"
K
0.315 .012 REF
TEM-XX-XX.X
C
0.10 [.004]
"D"
REF
"A"
1.04 .041
REF
(SEE NOTE 5)
"A" REF
T-1M58-XX.X-XX
(No. OF POS -1) x 0.800±0.130 .0315±.005
C
5.50 .217
C
SECTION "A"-"A"
NOTES:
K
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES ARE:
DECIMALS
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
K
1.
C
REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE FOR TERMINAL, LOCKING CLIP AND WELD TAB: 2.22N [0.50LBF].
3. POST HEIGHT VARIATION BETWEEN ANY TWO PINS: 0.13 [.005] MAXIMUM.
4. PARTS TO BE PACKAGED IN TRAYS UNLESS OTHERWISE SPECIFIED.
5. POSITIONS -05 THRU -20 WILL HAVE ONLY ONE SLOT PER SIDE.
POSITIONS -25 THRU -40 WILL HAVE TWO SLOTS PER SIDE.
POSITIONS -45 THRU -50 WILL HAVE THREE SLOTS PER SIDE.
6. SLOTS ONLY AVAILABLE IN -03.0 LEAD STYLE.
7. FOR QUANTITIES UP TO 49 PIECES, NO LEADER, TRAILER, OR REEL WILL BE SUPPLIED.
FOR QUANTITIES 50-124, NO LEADER, OR TRAILER WILL BE SUPPLIED.
F:\DWG\MISC\MKTG\TEMX-1XX-XX-XX.X-XX-D-XX-XX-MKT.SLDDRW
X.X: 0.3 [.01]
X.XX: 0.13 [.005]
X.XXX: 0.051 [.0020]
ANGLES
2
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
INSULATOR: ZENITE ZE55201, COLOR: BLACK
TERMINAL AND LOCKING CLIP: PHOS BRONZE 510
WELD TAB: BRASS ALLOY 260, FULL HARD
.8MM TIGER EYE MICRO TERMINAL
BY:
B RAY
TEMX-1XX-XX-XX.X-XX-D-XX-XX
10-18-2007
SHEET
1
OF
2
REVISION K
(TEM-110-02-03.0-XX-D-A SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
TEM-XX-XX.X-A
FIG 2
(TEM-110-02-03.0-XX-D-K SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
FIG 5
"R"
(SEE NOTE)
"S"
(SEE NOTE)
"C"
(SEE TABLE 1)
1.00 .039
REF
0.75 .030 REF
(No OF POS x 0.800[.0315]) + 2.000 .079
REF
5.50±0.13 .217±.005
NOTE: "R" = OVERALL LENGTH (REF)
"S" = {("R" - 5.50[.216])/2[.0787]} ± 0.51[.020]
0.25 .010
0.90 .035 REF
1.25 .049 REF
(TEM-110-02-03.0-XX-D-LC SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
TEM-XX-XX.X-LC
LC-06-TM
FIG 3
(TEMS-110-02-XX.X-XX-D-K SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
FIG 6
"R"
(SEE NOTE)
"S"
(SEE NOTE)
TEMS-XX-XX.X
C
1.27 .050
0.25 .010
REF
C
2 MAX SWAY (TYP)
(No OF POS x 0.80[.031])
+ 7.00[.276]
5.49±0.13 .216±.005
0.24 .010
TABLE 2
STACK HEIGHT
-03.0
-04.0
-07.0
WELD TAB
WT-36-02-X
WT-36-03-X
WT-36-04-X
(TEM-110-02-03.0-XX-D-WT SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
"B"
TEM-XX-XX.X
WT-36-XX-T
NOTE: "R" = ((No. OF POS x 0.800) + 3.35) ± 0.05
"S" = {("R" - 5.50[.216])/2[.0787]} ± 0.51[.020]
C
FIG 4
K
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
0.30 .012
REF
C
1.84 .072
"B"
2 MAX SWAY (TYP)
(No OF POS x 0.80[.031])
+ 7.00[.276]
SECTION "B"-"B"
0.50 .020
REF
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 3:1
.8MM TIGER EYE MICRO TERMINAL
TEMX-1XX-XX-XX.X-XX-D-XX-XX
10-18-2007
SHEET
2
OF
2
F:\DWG\MISC\MKTG\TEMX-1XX-XX-XX.X-XX-D-XX-XX-MKT.SLDDRW
BY:
B RAY
京公网安备 11010802033920号
EEWORLD
