MV64538.MP8A.A1A0

1. The stack is not big enough 2.  Is there a statement in the subroutine that directly or conditionally jumps out of the subroutine body? If so, a stack overflow will occur after running the subrout...[Details]

On April 10, a delegation from Sichuan Development Advanced Materials Group visited the Chuanwei Lianjie Base and had in-depth exchanges and discussions with Chuanwei Group on the development of ne...[Details]

　　33. Under the condition of a certain bandwidth, is it meaningless to have a too high sampling frequency? 　　A: Bandwidth is the basic condition for limiting the capture of high-frequency components ...[Details]

In response to the current push for electrification of vehicles, which is causing the decline of the internal combustion engine in vehicles, AVL has developed a combination of an efficient internal c...[Details]

The magnetic column level gauge uses a magnetic float to drive a two-color magnetic column to indicate the liquid level. It can be used for medium level detection in various towers, tanks, tanks, sph...[Details]

1 Further improve the energy efficiency of automobiles　　     In this era when all mankind is talking about new energy, car networking and autonomous driving, Bosch, as the world's number one suppl...[Details]

0Introduction In the process of dynamic test signal processing, filters are one of the commonly used test instruments. They are often used for anti-aliasing filtering to avoid aliasing in ...[Details]

The Korea Institute for International Economic Policy said in its recent report that more thorough supply chain risk management is needed for South Korean industrial products that are highly dependen...[Details]

Single-chip microcomputer, full name of single-chip microcontroller, single-chip microcomputer (Single-Chip Microcomputre), also known as embedded microcontroller (Embedded Microcontroller). The embe...[Details]

Example 1: Square Wave Generator The source code is as follows: main.c #include reg52.h sbit Square=P1^5; //Set square wave output pin P1^5 void main(void){  TMOD=0x02; //Configure TMOD: timer, ...[Details]

In recent years, the application of high-brightness LED has developed rapidly, especially in signboards and traffic lights. For automotive applications, LED is also very attractive. Long life, sho...[Details]

#include reg51.h   #include intrins.h   sfr  IAP_CONTR =  0xC7;  sbit MCU_Start_LED  =  P1^7;  //unsigned char self_command_array  =  {0x22,0x33,0x44,0x55};  #define Self_Define_ISP_Download_Comman...[Details]

In the STM32 example code, there will be code like this static __IO uint32_t TimingDelay; The __IO modifier here is not easy to understand. From the literal meaning, it can be seen that it is related ...[Details]

LMH2120 is a 6GHz linear RMS power detector with a dynamic range of 40dB, an operating frequency from 50 MHz to 6 GHz, a consistency better than ±0.5 dB, is not sensitive to temperature, and an ope...[Details]

Reset AVR  When resetting the ATtiny13, all I/O registers are reset to their initial values ​​and the program starts executing from the reset vector. The instruction at the reset vector must be an a...[Details]