EEWORLDEEWORLDEEWORLD

Part Number

Search

SST58SM048-70-C-FRS

Description
Micro Peripheral IC
CategoryThe embedded processor and controller    Microcontrollers and processors   
File Size389KB,42 Pages
ManufacturerSilicon Laboratories Inc
Download Datasheet Parametric View All

SST58SM048-70-C-FRS Overview

Micro Peripheral IC

SST58SM048-70-C-FRS Parametric

Parameter NameAttribute value
MakerSilicon Laboratories Inc
package instruction,
Reach Compliance Codeunknown
SST ATA-Disk Module
SST58SM008 / 016 / 024 / 032 / 048 / 064 / 096 / 128 / 192
SST58LM008 / 016 / 024 / 032 / 048 / 064 / 096 / 128 / 192
SST58SM/LMxxxATA-Disk Module
8MB / 16MB / 24MB / 32MB / 48MB / 64MB / 96MB / 128MB / 192MB
Advance Information
FEATURES:
• ATA/IDE standard interface
– 512 Bytes per sector
– ATA command set compatible
– Selectable Master/Slave Operation
– Support Data Transfer Speed up to PIO Mode-4
• 8, 16, 24, 32, 48, 64, 96, 128, and 192 MByte
capacities
• Standard Female IDE Connector
– 40-pin and 44-pin
• Single Voltage Read and Write Operation
– 5.0V-only for SST58SMxxx
– 3.3V-only for SST58LMxxx
• Supports 5.0-Volt or 3.3-Volt Read and Write
– 5V ± 10% or 3.3V ± 5% for Commercial
– 5V ± 5% or 3.3V ± 5% for Industrial
• Low Power Consumption
– Active mode: 35 mA/55mA (3.3V/5.0V) (typical)
– Sleep mode: 150 µA/250µA (3.3V/5.0V) (maximum)
• Sustained Write Performance
– Up to 1.4MB/sec (host to flash)
• Extended Data Protection and Security
– WP# pin for Data Protection
– Factory-Programmed, 20-Byte Unique ID number
• Controller Overhead Command to DRQ
– Less than 0.5 ms
• Zero Power Data Retention
– Batteries not required for data storage
• Start Up Time
– Sleep to read: 200 ns (typical)
– Sleep to write: 200 ns (typical)
– Power-on to Ready:200 ms (typical)
500 ms (maximum)
• Support for Both Commercial and Industrial
Temperature Range
– 0°C to +70°C for Operating Commercial
– -40°C to +85°C for Operating Industrial
– -50°C to +100°C for non-Operating (storage)
• Extremely Rugged and Reliable
– Built-in ECC support corrects 3 Bytes of error
per 512 Byte sector
– Endurance: 1,000,000 cycles (typical)
• Intelligent ATA/IDE Controller
– Built-in microcontroller with intelligent firmware
– Built-in Embedded Flash File System
• Power Management Unit
– Immediate disabling of unused circuitry
PRODUCT DESCRIPTION
SST’s ATA-Disk Module (ADM) is a low cost, high perfor-
mance, embedded flash memory data storage system.
This product is well suited for solid state mass storage
applications offering new and expanded functionality while
enabling cost effective designs.
The ADM is a solid state disk drive that is designed to
replace conventional IDE hard disk drive and can be
plugged into a standard IDE connector commonly found in
desktop or portable PC systems.
ADM has built-in microcontroller and file management
firmware that communicates with ATA standard inter-
faces; therefore, the ADM does not require additional or
proprietary host software such as Flash File System
(FFS) and Memory Technology Driver (MTD) software.
The ADM is designed to work at either 5V ±10% or 3.3V
±5% and is available in 8, 16, 24, 32, 48, 64, 96, 128, and
192 MByte capacities. It uses standard ATA driver that is
part of all major OS such as Windows 95/98/2000/NT/CE,
MAC, UNIX, etc.
All signals, except WP#, are in compliance with the ATA
specifications. WP# is used to write protect the information
stored on the ADM. The WP# can be either connected to
motherboard write protect control logic or a jumper. When
WP# is low, the ADM is write protected to prohibit any inad-
vertent writes.
Every ADM comes with factory-programmed, 20-Byte long,
unique identification number for extended data protection.
This feature prevents unauthorized duplication by allowing
encryption of customer data.
The ADM integrates a standard 40- or 44-pin female
connector for easy and cost effective mounting on top
of a standard IDE male connector commonly found on
the system motherboards. ADM also offers user
selectable Master/Slave operation through an external
jumper setting.
©2001 Silicon Storage Technology, Inc.
S71193-00-000 7/01
519
1
The SST logo and SuperFlash are registered trademarks of Silicon Storage Technology, Inc.
These specifications are subject to change without notice.
How to configure the timer?
I am going to use the laser ranging module and need to count microseconds. I use timer 4 and set the time to 1um. I add 1 to the variable every time it is interrupted. When testing, I first clear the ...
hujj stm32/stm8
Digitally controlled DCDC converter
Digitally controlled DCDC converter 1 Introduction :This design is a digital control DCDC converter . MCU is used to control the output voltage of the DCDC converter to achieve the purpose of digital ...
lcdi GD32 MCU
How to deal with the prompt "Transient time point calculation did not converge" during Multisim simulation
How to deal with the error "Transient time point calculation did not converge" when simulating with Multisim under high-frequency signals? Thank you!...
小朋友给我冲 Analog electronics
What are the configurations of the computer that ranks fourth in the world?
On August 5, blogger @电丸科技AK released a new video recording his experience of being invited to help Wang Sicong, the son of China's former richest man Wang Jianlin, assemble a computer. According to t...
eric_wang Talking
Hahaha
I was quarantined at home due to the epidemic. I left my computer at the company and asked the company to help me deliver the computer. As a result, I found the computer on the ground when I walked ou...
hery Talking
The development board is connected to the Internet via a shared network
Set the connected network WLAN6 Set the Ethernet shared to the development boardSet the development board to automatically obtain the IP: # udhcpc -i eth0 Check whether you are connected to the Intern...
明远智睿Lan Industrial Control Electronics

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号