-
RTC-Real Time Clock is a real-time clock module for 430 microcontrollers. It can be configured as a real-time clock mode (perpetual calendar) or a general-purpose 32-bit counter mode. The real-time...[Details]
-
Elements such as carbon, sulfur, silicon, manganese, phosphorus, nickel, chromium, and copper in metal materials have an important impact on their performance and quality. Intelligent and high-spe...[Details]
-
The circuit is very simple so I won't draw it. It is made of STC series microcontroller. The display part is two 74hc573 chips connected to P1 port, and then use P3.0 to control the segment selecti...[Details]
-
The voice-controlled electronic notepad system introduced in this article implements voice recognition and voice encoding and decoding on the same DSP chip, using voice instead of other method...[Details]
-
1. With the digital oscilloscope, our processing of waveforms is no longer simple. We are no longer just looking at the shape of the waveform, and we are no longer satisfied with just measuring a few...[Details]
-
In general, there are some limitations when using J-LINK to debug PIC32 under MPLAB X IDE; the recommended approach is to use Microchip's own debugging tools. The following is an excerpt from the h...[Details]
-
As an important part of building automation, automated windows are gradually gaining attention, and more and more automated windows are being applied to various buildings. Several window openers i...[Details]
-
To talk about rigidity, we must first talk about stiffness. Stiffness refers to the ability of a material or structure to resist elastic deformation when subjected to force, and is a representation...[Details]
-
Author(s):
Michael Schulze - Anco Engineers
Paul Ibanez - Anco Engineers
Industry:
Machines/Mechanics
Products:
LabVIEW, PCI-6221
The Challenge:
Create an easy-to...[Details]
-
2.7~5.3V, it can provide a stable output voltage or output current to drive white LED. The MAX1913 driving white LED circuit is shown in the figure. It only needs 4 small ceramic capacitors and no ...[Details]
-
Last time, we talked about that due to the continuous upgrade of the stm32 official library and iare ew arm, many configurations have changed. 1 This error occurred when upgrading stm32 stdlib 3.5...[Details]
-
Motor starting
The motor must be started in expert mode.
To activate "Expert Mode" you must switch DIP switch S10/1 to ON. This is the default setting. This information is also avai...[Details]
-
Scientists at MIT have created the first fully digitally fabricated plasma sensor for satellites. These plasma sensors, also known as retarded potential analyzers (RPAs), are used by orbiting spacecr...[Details]
-
Different ways to check if the motor is burnt out: 1. The motor is short-circuited to the ground. The test method is to use an insulation meter with one end connected to the ground and the other end ...[Details]
-
November 1, 2024 –
Mouser Electronics, an authorized global distributor of electronic components and industrial automation products focused on New Product Introduction (NPI), is now offering ne...[Details]