F-210
IDMD–24–S–12.00–G
(2,54mm) .100"
IDSS, IDSD, IDMS, IDMD SERIES
SLIM BODY FLAT RIBBON IDC CABLES
SPECIFICATIONS
Mates with:
TSW, MTSW, TSM, EJH
IDSD Mates with:
TST, HTST, ZST
IDSS, IDSD
TYPE
STRIP
ROW
OPTION
NO. PINS
PER ROW
END
ASSEMBLY
For complete specifications
see www.samtec.com?IDSS
or www.samtec.com?IDSD
Insulator Material:
Black Glass Filled
Polyester
Plating:
Au over 50µ" (1,27µm) Ni or
Sn over 100µ" (2,54µm) Cu or
50µ" (1,27µm) Ni
Wire:
28 AWG 7/36 stranded Tinned
Copper
Temperature Range:
-20°C to +105°C
(Rainbow Cable)
-40°C to +105°C
(Gray Cable)
Contact:
BeCu
Current Rating:
1A
Contact Resistance:
10 mΩ max
Lead Size Range:
(0,56mm) .022" SQ to
(0,71mm) .028" SQ
Lead Insertion Depth:
(5,59mm) .220" to
(6,22mm) .245"
Insertion Force:
(Single contact only)
4oz avg.
((0,64mm) .025" SQ probe)
Withdrawal Force:
(Single contact only)
3oz avg.
((0,64mm) .025" SQ probe)
RoHS Compliant:
Yes
S
= Single
–S
= Single
End
D
IDM
= Standard Tail Male Plug
= Double
(Color coded
cable N/A for
31 thru 36
pins/row.
See –G
option.)
Socket or Male Plug on one end
IDS
= Socket
–D
= Double
End
–02 thru –32
DOUBLE
Full size (64 positions):
(82,55) 3.250
Less than 64 positions:
No. Positions/row X (2,54) .100 + (1,68) .066
SINGLE
Full size (32 positions):
(81,53) 3.210
Less than 32 positions:
No. Positions/row X (2,54) .100 + (0,71) .028
IDMS
(Single)
(2,54)
.100
IDMD
(Double)
Socket or Male Plug on each end
(5,08)
.200
(6,10)
.240
MAX
–T
= Transfer
End
(0,48)
.019
(0,46)
.018
x
(0,48)
.019
(2,54)
.100
(3,18)
.125
(2,54)
.100
SPECIFICATIONS
Male Plug on one end with socket on
other.
Begin part number with IDM.
IDMS, IDMD
For complete specifications
see www.samtec.com?IDMS
or www.samtec.com?IDMD
Insulator Material:
Black Glass Filled
Polyester
Plating:
Au over 50µ" (1,27µm) Ni or
Sn over 100µ" (2,54µm) Cu
or 50µ" (1,27µm) Ni
Wire:
28 AWG 7/36 stranded
Tinned Copper
Temperature Range:
-20°C to +105°C
(Rainbow Cable)
-40°C to +105°C
(Gray Cable)
Terminal:
Phosphor Bronze
Current Rating:
1A
RoHS Compliant:
Yes
Note:
This Series is non-standard,
non-returnable.
(For square or long tail see HCMX Series)
–02 thru –36
DOUBLE
Full size (72 positions):
(91,71) 3.650
Less than 72 positions:
No. Positions/row x (2,54) .100 + (1,50) .059
SINGLE
Full size (36 positions):
(91,69) 3.610
Less than 36 positions:
No. Positions/row x (2,54) .100 + (0,48) .019
EJECTOR HEADERS
& LOCKING CLIPS
See EJH Series.
IDSS
(Single)
IDSD
(Double)
(5,08)
.200
IDSS or IDSD
STRIP ASSEMBLY
(9,27)
.365
REF
LOCKING
CLIP
PC
BOARD
(2,54)
.100
.025" SQ
TERMINAL
STRIP (TSW)
(2,54)
.100
(0,76)
.030
SQ
See TSW Series.
WWW.SAMTEC.COM
IDSD–05–D–04.25–S02
IDSD–24–S–05.00
ASSEMBLED
LENGTH
OPTION
ALSO AVAILABLE
Molded-To-Position
IDC Assembles
– “XX.XX”
= Assembled Length
Assembled Length in
INCHES (±
1
/
8
"
)
(2 inches minimum)
POLARIZING KEY
(0,64) .025
SQ
(5,84)
.230
Optional polarizing key for
use with IDSS & IDSD
Series. Also polarizes
SSW, SSQ, ESW & ESQ
Series. Black High
Temperature Thermoplastic
Order: Part Number PK-01-06
(Available in wheels of six each)
•
•
•
•
•
Low Profile
Skinny side locks
Dual beam contacts
Single and double row
(6,35mm) .025" square
and (5,84mm) .230"
length tail available
Call Samtec for
HCXX Series.
–T
= Tin Plating
(Both ends)
–C
= 10µ" (0,25µm) Gold IDS
(-T End Assembly Required)
(0,25µm) Gold IDM
–A
= 10µ"IDS
Tin
(-T End Assembly Required)
Tin IDM
–ST “X”
= Stripped & Tinned
Specify Suffix from table.
All dimensions are ± 1/16".
Not available in 28 positions and higher.
“XX” ±
1
⁄
8
"
–S “XX”
= Daisy Chain Single
2"
min.
Single Row
Connectors
(IDSS)
–R
= Reversed
Outer Most
4" minimum
Standard plating is selective
gold over BeCu contact for IDS;
Selective gold over phosphor
bronze for IDM.
1
–P “XX”
=Polarized
72
04
02
–ST8
–ST4
–ST2
–ST3
1/8" (3,18)
1/4" (6,35)
1/2" (12,70)
3/8" (9,53)
4
When mating double row
connector with two single row
connectors, the outer most
single will be connected to
Conductor #1 and the inside
single to Conductor #2.
8
–M
= Middle Reversed
7
–B “XX”
= Breakout
71
03
01
–D “XX”
= Daisy Chain, Double
“XX” ±
1
⁄
8
"
2"
min.
Double Row
Connectors
(IDSD or
IDMD)
Outer Most
Specify “XX” as position. For
Double the same position will
be polarized on both ends.
(Not available on IDM or EDM,
unless transfer, then only the
socket is polarized.)
Specify “XX” as number of
conductors to be broken out.
Requires –SXX, –WXX or –DXX
8
2
“XX”
4" minimum
7
–O
= Outside Reversed
–G
= Gray Cable
5"max.
2"min.
Specify –G for Gray cable. Gray
cable has one red edge. IDSS
and IDMS uses .100" centerline
cable. IDSD and IDMD uses
.050" centerline cable. Cable is
28 AWG 7/36 copper wire.
Standard cable is same as
above except color coded.
3
Breakout starts with Number 1
lead indicated by brown wire or
red stripe. Shown on top side.
–W “XX”
5
= Wiring Reversed
Daisy Chain, Single
–RW
= Reversed Wiring
#1 wire opposite position #1.
6
Same as –S “XX” except outer
strip connected to Conductor
#2 and inside strip connected
to Conductor #1.
7
Requires –SXX, –WXX or –DXX
8
WWW.SAMTEC.COM
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD
