Q SERIES Ø14mm (.551") Panel Mount LED Indicators
Distinctive features and specification
Q14_VOYC1609R2US
Features
• 14mm panel mounting LED indicator
• 10mm colored diffused epoxy lens or 10mm water clear super bright LEDs
• Plated brass bezel finished in bright chrome,
black chrome or satin grey and moulded polycarbonate rear body
• Prominent recessed and flush bezel styles
• Custom engraving available
• 2VDC – 220VAC
• (2.8 x 0.8) solder lug/Faston terminals, pins or (200mm long) wire terminations
• IP67 sealing option (EN60529)
• Supplied with fixing nut and spring washer
NB: UL Recognized Component
TECHNICAL SPECIFICATIONS
Voltage
02 (No Resistor)
6VDC
12VDC
24VDC
28VDC
110VAC
220VAC
Operating Voltage
(Min to Max)
1.8 to 3.3VDC
5.4 to 6.6VDC
10.8 to 13.2VDC
21.6 to 26.4VDC
25.2 to 30.8VDC
99 to 121VAC
207 to 253VAC
Operating Current
(Typical All Types)
20mA max*
20mA
20mA
20mA
20mA
6mA
3mA
Max Reverse Voltage:
5V
Viewing Angle:
30–100°
(dependant on model)
Life Expectancy:
100,000 hours
Temperature Range:
–40 to +85°C
(operating & storage)
Torque:
75cNm
Ø 14.00 +0.15/-0.0
17,00 0,669
AF
3,00 0,118
PANEL CUTOUT
M14 x 1,0 THREAD
Standard LED Intensity
Prominent and Recessed
Flush
Forward Voltage
HE Red
80mcd
10mcd
2.0V
Green
60mcd
5mcd
2.2V
Yellow
50mcd
4mcd
2.1V
Blue
540mcd
100mcd
3.3V
White
1000mcd
150mcd
3.3V
Orange
80mcd
200mcd
2.0V
Bi-color (Typical) (Red/Green)
15/15mcd
14/10mcd
2.0V/2.2V
Tri-color (Typical) (Red/Green/Yellow)
60/50/50mcd
15/10/30mcd
2.0V/2.2V/2.1V
Bi-color - The color is changed by reversing the polarity of the supply voltage.
Tri-color - The indicator has red and green LEDs, when both connected yellow is produced.
Super Bright LED
HE Red
Green
Yellow
Blue
White
Orange
Hyper Bright LED
HE Red
Green
Yellow
Orange
Prominent and Recessed
17,000mcd
11,000mcd
4,000mcd
2,500mcd
4,400mcd
2800mcd
Prominent and Recessed
2,800mcd
2,200mcd
1,300mcd
850mcd
Flush
2,000mcd
680mcd
350mcd
250mcd
250mcd
300mcd
Flush
800mcd
250mcd
250mcd
200mcd
Forward Voltage
2.2V
3.5V
2.3V
3.3V
3.3V
2.1V
Forward Voltage
2.1V
3.2V
2.0V
2.1V
Luminous intensity will be reduced with lower operating current.
Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy.
The company reserves the right to change specifications without notice.
* Customer to supply resistor for desired operating current.
Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.
Luminous intensities and color shades of white LEDs may vary within a batch.
LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal.
APEM
www.apem.com
1
Q SERIES Ø14mm (.551") Panel Mount LED Indicators
Technical Drawings
16,00
0,630
16,00
0,630
PROMINENT BEZEL
SOLDER LUG/FASTONS
M14x1,0
2,8x0,8[0,11x0,031]
M14x1,0
0,50 0,020
1,25 0,049
1,25 0,049
PINS
4,75 0,187
13,50 0,531
33,75 1,329
10,00 0,394
9,35 0,368
4,75 0,187
13,50 0,531
28,75 1,132
7,00 0,276
5,50 0,217
WIRES
16,00
0,630
16,00
0,630
M14x1,0
REAR EPOXY PINS
M14x1,0
0,50 0,020
1,25 0,049
1,25 0,049
18,25 0,719
16,75 0,659
4,75 0,187
13,50 0,531
200,0+/-10
[7,874+/-0,393]
28,75 1,132
4,75 0,187
13,50 0,531
17,50 0,689
16,00
0,630
16,00
0,630
16,00
0,630
REAR EPOXY WIRES
M14x1,0
M14x1,0
SHORT BODY PINS
0,50 0,020
1,25 0,049
1,25 0,049
SHORT BODY WIRES
M14x1,0
4,75 0,187
13,50 0,532
17,50 0,689
200,0+/-10
[7,874+/-0,393]
4,75 0,187
13,50 0,531
19,75 0,778
16,00 0,630
14,50 0,571
4,75 0,187
13,50 0,531
19,75 0,778
200,0+/-10
[7,874+/-0,393]
16,00
0,630
16,00
0,630
FLUSH BEZEL
SOLDER LUG/FASTONS
M14x1,0
2,8x0,8[0,11x0,031]
M14x1,0
0,50 0,020
1,25 0,049
1,25 0,049
PINS
1,50 0,059
13,5[0,531]
34,10 1,343
10,00 0,394
9,35 0,368
1,50 0,059
13,50[0,531]
29,10 1,146
7,00 0,276
5,50 0,217
16,00
0,630
16,00
0,630
WIRES
M14x1,0
REAR EPOXY PINS
M14x1,0
0,50 0,020
1,25 0,049
1,25 0,049
18,25 0,719
16,75 0,659
1,50 0,059
13,50[0,531]
200,0+/-10
[7,874+/-0,393]
29,10 1,146
1,50 0,059
13,50[0,531]
17,85 0,703
16,00
0,630
REAR EPOXY WIRES
16,00
0,630
M14x1,0
SHORT BODY PINS
0,50 0,020
1,25 0,049
1,25 0,049
16,00
0,630
SHORT BODY WIRES
M14x1,0
1,50 0,059
13,50[0,531]
17,85 0,703
200,0+/-10
[7,874+/-0,393]
1,50 0,059
13,50[0,531]
20,10 0,791
16,00 ,630
14,50 0,571
1,50 0,059
13,50[0,531]
20,10 0,791
200,0+/-10
[7,874+/-0,393]
2
www.apem.com
APEM
Q SERIES Ø14mm (.551") Panel Mount LED Indicators
Technical Drawings
16,00
0,630
16,00
0,630
RECESSED BEZEL
SQ
M14x1,0
M14x1,0
5,00 0,197
13,50 0,531
33,75 1,329
10,00 0,394
9,35 0,368
5,00 0,197
13,50 0,531
28,75 1,132
7,00 0,276
5,50 0,217
16,00
0,630
WIRES
M14x1,0
16,00
0,630
M14x1,0
5,00 0,197
13,50 0,531
28,75 1,132
200,00+/-10
[7,874+/-0,393
5,00 0,197
13,50 0,531
17,50 0,689
18,25 0,719
16,75 0,659
16,00
0,630
M14x1,0
0,50 0,020
2,50 0,098
1,25 0,049
M14x1,0
16,00
0,630
16,00
0,630
REAR EPOXY WIRES
SHORT BODY
PINS
SHORT BODY WIRES
M14x1,0
SQ
5,00 0,197
13,50 0,531
17,50 0,689
200,00+/-10
[7,874+/-0,393]
5,00 0,197
13,50 0,531
19,75 0,778
16,00 0,630
14,50 0,571
5,00 0,197
13,50 0,531
19,75 0,778
200,00+/-10
[7,874+/-0,393]
APEM
www.apem.com
0,50 0,020
2,50 0,098
1,25 0,049
SQ
0,50 0,020
2,50 0,098
1,25 0,049
2,8x0,8[0,11x0,031]
SOLDER LUG/FASTONS
PINS
EPOXY PINS
3
Q SERIES Ø14mm (.551") Panel Mount LED Indicators
Custom options
CUSTOM MARKING
Cable length & connector
For custom cable length and
connectors please contact
APEM
CUSTOM ENGRAVING
Suffix the part number with legend code.
Code
Symbol
Description
Code
-0AJ
-097
-027
-026
-021
High Beam
Low Beam
Rear Fog
Front Fog
Windscreen
Wiper
Windscreen
Washer
Ventilator
Fan
Turn
Signal
Side Lights
-041
-013
-018
-0BU
-0K6
Symbol
Description
Horn
Hazard
Warning
Heating
Brake Test
Arrow
Code
-0EL
-0SB
-0UB
-0ST
-0EU
Symbol
Description
Engine
Coil
Seat Belt
USB
Connection
Steam
ECU
-022
-023
-0AH
-0AG
-0GP
-020
Battery
Oil Can
Windscreen
Heating
ABS
-0AD
-012
-040
Side Step
Air Con
Engine
Boot/Trunk
Release
-098
-086
-0BR
Some common codes are listed above, for your custom requirements please contact APEM.
Unless specified, standard engraving with white infill will be supplied.
4
www.apem.com
APEM
Q SERIES Ø14mm (.551") Panel Mount LED Indicators
Order Overview
STANDARD OPTIONS
The Q14 Series is available with a range of standard options, to specify your LED, simply choose one option from each
column. An example is shown below.
Q
SERIES
Q
14
MOUNTING
HOLE
14 = Ø14mm
P
BEZEL
STYLE
P = Prominent
R = Recessed
F = Flush
1
TERMINALS
1 = Solder Lug/
Fastons
(2.8 x 0.8)
2 = Pins
3 = Wires
4 = Rear epoxy
Pins
5 = Rear epoxy
Wires
6 = Short body
Pins
7 = Short body
Wires
C
BEZEL FINISH
C = Bright Chrome
B = Black Chrome
G = Satin Grey
Anodised Flush
AR = Red
AG = Green
AY = Yellow
AB = Blue
AN = Black
XX
TYPE OF
ILLUMINATION
XX = Fixed Light
KK = Flashing Light
(12- 28VDC)
YY = Bi-color
ZZ = Tri-color
B
LED COLOR
R = Red
G = Green
Y = Yellow
B = Blue
W = White
O = Orange
28
VOLTAGE
02 = no resistor
*
06 = 6VDC
12 = 12VDC
12A = 12VAC/DC
24 = 24VDC
24A = 24VAC/DC
28 = 28VDC
E
SEALING
(Blank) = Unsealed
E = IP67
HR = Hyper Bright Red
HG = Hyper Bright Green
HY = Hyper Bright Yellow
HO = Hyper Bright Orange
28A = 28VAC/DC
110 = 110VAC
220 = 220VAC
SR = Super Bright Red
Example Q14F5ABXXB12E
Ø14mm, Flush bezel, wire termination, blue LED
anodized blue finish, fixed light,
12VDC LED, IP67 panel sealed,
SG = Super Bright Green
SY = Super Bright Yellow
SB = Super Bright Blue
SW = Super Bright White
RG = Red/Green
RY = Red/Yellow
GY = Green/Yellow
RYG = Red/Yellow/Green
• Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-)
• Standard wire length is 200mm, 22AWG UL1007, red wire denotes Anode (+), black wire denotes Cathode (-)
for other wire lengths consult APEM
• For LEDs with alternative voltages consult APEM
• Bi-color LEDs, by connecting the gold Faston (+) one color is produced,
by reversing the supply voltage another color is produced – Bi-colors are available up to 28VDC
• Take care when soldering to the Faston terminals (recommended solder temperature 300°C - 3 sec)
• Short body pins and wires are only available up to 28VDC
• The Tri-color LED has red and green LEDs when both are connected yellow is produced
• Standard Tri-color Faston terminals are two Anodes (+) and one Cathode (-)
• Tri-color wires are one red (+) and one green (+) Anode and one black (-) Cathode
• Tri-color pins are center (–) Cathode, shortest (+) Anode pin green, longest (+) Anode pin red
• Maximum panel thickness 11mm
• We recommend using Hyper bright LEDs for use at 110VAC and 220VAC
• For multi-voltage options please consult APEM
* = For resistorless versions (02) please refer to the forward voltage on page 1
APEM
www.apem.com
5
Integrated technical exchanges
京公网安备 11010802033920号
EEWORLD
