REVISION CZ
DO NOT
SCALE FROM
THIS PRINT
NOTES:
1.
C
REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE: .50 LBS.
No OF POSITIONS
3. COPLANARITY TO BE:
-02 THRU -36
-DH: -36 THRU -28 POS: .008[0.20]
(SEE NOTE 8)
-02 THRU -27 POS: .006[0.15]
-SV, -SH: -02 THRU 36 POS: .006 (FULL STRIP STOCK: .008).
PLATING SPECIFICATION
4. PACKAGE IN TUBES PER SHT 4, TABLE 2. ALL OTHER POSITIONS BULK PACKAGE.
-S: 30µ" SELECTIVE GOLD IN CONTACT
5. MAXIMUM CUT FLASH: .015[0.38].
AREA, MATTE TIN ON TAIL.
6. NOTCH OF PPP-12 TO BE ORIENTED TOWARD SAME END AS POSITION 1.
-L: 10µ" SELECTIVE GOLD IN CONTACT
7. ROWS TO BE WITHIN .004[0.10] OF ONE ANOTHER.
AREA, MATTE TIN ON TAIL.
8. -36 MAX POSITION AVAILABLE, -50 FOR STOCK ONLY.
-T: MATTE TIN ON CONTACT AND TAIL.
9. ENDWALL AFTER CUTTING: .033[0.84]±.005[0.13]
-F: 3µ" SELECTIVE GOLD IN CONTACT
10. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION
AREA, MATTE TIN ON TAIL.
IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS
-STL: 30µ" SELECTIVE GOLD IN CONTACT
AREA, TIN/LEAD (90/10) ON TAIL.
MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.
-H: 30µ" SELECTIVE GOLD IN CONTACT
11. FOR -SV TAIL STYLE: EVEN CUTS LOSE 2 POSITIONS PER CUT; ODD CUTS
AREA, 3µ" SELECTIVE GOLD ON TAIL.
LOSE 1 POSITION PER CUT.
-LM: 10µ" SELECTIVE GOLD IN CONTACT
12. IF POLARIZATION OCCURS AT CENTER POSITION(S) OF BODY, MOVE PICK &
AREA, MATTE TIN ON TAIL.
PLACE PAD LEFT OR RIGHT TO NEXT AVAILABLE POSITION.
-TM: MATTE TIN ON CONTACT AND TAIL.
13. THIS DIMENSION IS TO BE MEASURED RELATIVE TO DATUM -Z-.
-FM: 3µ" SELECTIVE GOLD IN CONTACT
14. CHAMFERED END WALL MAY OR MAY NOT BE ON CUT TO POSITION PARTS.
SSM-1XX-XXX-XX-XX-XX-X-XX-XX
OPTION
-TR: TAPE AND REEL
(SEE FIG 8, SHT 4)
(29 POSITIONS MAX)
OPTION
-P: PICK AND PLACE PAD
(ONLY AVAILABLE ON -SV,
USE PPP-12, SEE FIG 6, SHT 3)
(SEE NOTE 12)
-K: POLYIMIDE FILM PAD
(SEE FIG 5, SHT 2)
(USE K-DOT-.138-.250-.005)
(NOT AVAILABLE ON -SH AND -DH)
POLARIZATION OPTION
-XX: POSITION TO BE POLARIZED
(USE PK-06-N, SEE FIG 7, SHT 3
FOR POLARIZATION POSITIONS)
(NOT AVAILABLE FOR -BE OPTION)
MOUNTING OPTION
-LC: LOCKING CLIP
(USE LC-05-TM, SEE NOTE 10)
(FOR -SH AND -DH USE MOLDED TO
POSITION BODIES)
OPTION
-BE: BOTTOM ENTRY
(ONLY AVAILABLE ON -SV)
(USE SSM-XX-S-BE)
(SEE FIG 2, SHT 2)
(NO OF POS x .100[2.54]) -.100[2.54]
.050 1.27
REF
TAIL SPECIFICATION
-SV: SINGLE VERTICAL (SEE FIG 1)
(USE SSM-XX-S)
-SH: SINGLE HORIZONTAL (SEE FIG 3, SHT 2)
(USE SSM-XX-SH)
C
-DH: DOUBLE HORIZONTAL (SEE FIG 4, SHT 3)
(NO OF POS x .100[2.54])
(USE BCH-XX-D)
±.010[0.25] (CUT TOLERANCE, SEE NOTE 11)
±.005[0.13] (MOLDED BODY TOLERANCE)
02
36
.100 2.54 REF
SSM-XX-S
01
35
2 MAX SWAY
C
(EITHER DIRECTION)
CONTACT #1
-Z-
C
+.002
.295
- .005
.18 4.6 REF
FLUSH TO .005[0.13] MAX
"A"
SEE NOTE 9
.290 7.37 REF
(MEASURE AT BEND)
7.49
+0.051
- 0.127
1°
C
(SEE NOTE 13)
SEE NOTE 3
DETAIL 'D'
SCALE 8 : 1
LC-05-TM
"A"
'D'
.050 1.27
(NO OF POS x .100[2.54]) -.200[5.08]
2 MAX SWAY
(EITHER DIRECTION)
C
4°
(SEE NOTE 13)
C
.047 1.19
-SV: SINGLE VERTICAL ROW
(SSM-1XX-XXX-SV-LC SHOWN)
FIG 1
SECTION "A"-"A"
SCALE 3 : 1
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
-SV IN-PROCESS
*
*
PROPRIETARY NOTE
.XX: .01 [0.3]
2
.XXX: .005 [0.13]
.XXXX: .0020 [0.051]
ANGLES
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
INSULATOR: LCP, UL 94 VO, COLOR: BLACK
CONTACT: PHOS BRONZE
.100[2.54] C.L. SURFACE MOUNT SOCKET STRIP
SSM-1XX-XXX-XX-XX-XX-X-XX-XX
09/11/1998
SHEET
1
OF
4
F:\DWG\MISC\MKTG\SSM-1XX-XXX-XX-XX-XX-X-XX-XX-MKT.SLDDRW
BY:
KOLB
REVISION CZ
"R"
SSM-XX-S-BE
"S" ±.020[0.51]
.300 7.62
-SV-BE: SINGLE VERTICAL ROW BOTTOM ENTRY
(SSM-1XX-XXX-SV-BE SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
FIG 2
01
.138 3.50 REF
FIG 5
.019±.020 0.48±0.51
-K: KAPTON PAD
(SSM-110-XXX-SV-K SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
"R" = SEE FIG 1, SHEET 1 FOR OAL
"S" = "R"/2 - .0689[1.750]
.069 1.75
C
+.010
.433
- .020
C
+0.254
11.00
- 0.508
CONTACT #1
3°
C
(SEE NOTE 13)
SEE NOTE 3
C
.058 1.47
-SH IN-PROCESS
2 MAX SWAY
(EITHER DIRECTION)
.020 0.51
REF
.053 1.35 REF
-Z-
.015 0.38
.320 8.13 REF
MEASURE AT BEND
2 MAX SWAY
(EITHER DIRECTION)
3°
(SEE NOTE 13)
.055 1.40
SSM-XX-SH
SECTION "B"-"B"
"B"
.125 3.18
.070 1.78 REF
01
"B"
LC-05-TM
36
-SH: SINGLE HORIZONTAL
(SSM-136-XXX-SH-LC SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
FIG 3
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
PROPRIETARY NOTE
*
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.100[2.54] C.L. SURFACE MOUNT SOCKET STRIP
SSM-1XX-XXX-XX-XX-XX-X-XX-XX
BY:
KOLB
F:\DWG\MISC\MKTG\SSM-1XX-XXX-XX-XX-XX-X-XX-XX-MKT.SLDDRW
09/11/1998
SHEET
2
OF
4
REVISION CZ
CONTACT #1
CONTACT #2
.430±.020 10.92±0.508
.055 1.40 REF
.078 1.98
.167 4.24
FLUSH TO .008[0.20] MAX
(SEE NOTE 7)
BCH-XX-D
C
.272 6.91 REF
-DH IN-PROCESS
.055 1.38
SECTION "C"-"C"
SEE NOTE 14
72
"C"
02
71
"C"
01
-DH: DOUBLE HORIZONTAL
(SSM-1XX-XXX-DH-LC SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 3)
01
"R"
"S"±.010[0.25]
.395 10.03
REF
.195 4.95
REF
PK-06-N
01
02
72
02
SSM-136-XXX-SV-02 SHOWN
36
FIG 4
SEE NOTE 14
PK-06-N
SEE NOTE 6
POS 1
PPP-12
.050 1.27
REF
SSM-136-XXX-SH-02 SHOWN
36
02
PK-06-N
-P: PICK AND PLACE PAD
(SSM-110-XXX-SV-P SHOWN)
-02 AND -03 POS NOT AVAILABLE WITH POLARIZATION
-04 POS - CANNOT OFFER IF POLARIZATION IS POS 2 OR 3
-05 POS - CANNOT OFFER IF POLARIZATION IS POS 3
*MUST USE TR ON POS 2 & 3
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
"R" = SEE FIG 1, SHEET 1 FOR OAL
"S" = IF NO OF POS IS EVEN: "R"/2 - .1975[5.017]
IF NO OF POS IS ODD: "R"/2 - .2475[6.287]
FIG 6
71
SSM-136-XXX-DH-02 SHOWN
01
POLARIZATION
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
FIG 7
*
PROPRIETARY NOTE
*
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 3:2
.100[2.54] C.L. SURFACE MOUNT SOCKET STRIP
SSM-1XX-XXX-XX-XX-XX-X-XX-XX
BY:
KOLB
F:\DWG\MISC\MKTG\SSM-1XX-XXX-XX-XX-XX-X-XX-XX-MKT.SLDDRW
09/11/1998
SHEET
3
OF
4
REVISION CZ
MATING SIDE
OF CONNECTOR
POS 1
CONTACT ENTRY
SIDE FOR ASSEMBLY
POS 1
SSM-110-XXX-SV-TR SHOWN
USER DIRECTION OF UNREELING
SSM-110-XXX-SH-TR SHOWN
USER DIRECTION OF UNREELING
SSM-110-XXX-DH-TR SHOWN
USER DIRECTION OF UNREELING
-TR: TAPE AND REEL
SCALE 1:1
STANDOFF
SIDE OF BODY
FIG 8
SSM-1XX-XXX-SV-LC-P SHOWN
(SSM-1XX-XXX-SV-LC-K SIMILAR)
SSM-1XX-XXX-SV-LC SHOWN
CORE LEAD IN
SIDE OF BODY
SSM-1XX-XXX-DH-LC SHOWN
CORE LEAD IN
SIDE OF BODY
POS 1
SSM-1XX-XXX-SV-P SHOWN
(SSM-1XX-XXX-SV-K SIMILAR)
1ST POSITION WITH TUBE LOGO
STANDOFF SIDE
OF BODY
SSM-1XX-XXX-SH-LC SHOWN
TUBE VIEWS
FIG 9
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
PROPRIETARY NOTE
*
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 3:2
.100[2.54] C.L. SURFACE MOUNT SOCKET STRIP
SSM-1XX-XXX-XX-XX-XX-X-XX-XX
09/11/1998
SHEET
4
OF
4
F:\DWG\MISC\MKTG\SSM-1XX-XXX-XX-XX-XX-X-XX-XX-MKT.SLDDRW
BY:
KOLB
京公网安备 11010802033920号
EEWORLD
