How to use software wait?DSP has a fast instruction cycle, so it is necessary to wait when accessing slow memory or peripherals. Waiting can be divided into hardware waiting and software waiting, and ...
question:
"../Source/DSP2833x_SysCtrl.c", line 16: fatal error #5: could not open source file "DSP2833x_Device.h" . All header files have been included under include in the project directory, but the ...
[i=s]This post was last edited by fsyicheng on 2018-7-31 23:12[/i] I was planning to buy an oscilloscope on Taobao recently. I found an oscilloscope brand and happened to encounter an event, so I boug...
Energy conversion systems inevitably have energy losses. Although 100% conversion efficiency cannot be achieved in practical applications, a high-quality power supply can achieve very high efficiency ...
The timing of ADS1251 and the corresponding time of each part are shown in the figure below. Is there anything wrong with the reading code I wrote?
double GET_DOUT(void)
{unsigned int temp = 0x0000000...
Introducing a magic tool that can connect the power analyzer to the CAN bus network, the WT-CAN communication adapter: iDAQ-WTCAN. It is the small box in the picture below. With it, you can directly c...