2 mm 4/5-Row, Vertical, Solder or Press-Fit Tail, Shouldered Pin
MP2 Series
Solder Tail
• End-to-end stackable
• Select load capability
• Monoblockable
• Shoulder Pin
Press Fit
• End-to-end stackable
• Early mate late break for hot swapping (press-fit EMLB
adjusted by application tooling)
• Select load capability
• Monoblockable
• Push-on shoulder pin
• Optional feed-through tail for rear plug-up midplane
applications
• Accepts Universal Tooling
• RoHS Compliant. See the Regulatory Information
Appendix (RIA) in the “RoHS compliance” section of
www.3M.com/Interconnects for compliance information
(RIA E1 & C1 apply)
Date Modified: September 9, 2009
TS-1120-C
Sheet 1 of 4
Physical
Insulation:
Material: High Temp LCP
Flammability: UL 94V-0
Color: Beige
Color:
Material: Phosphor Bronze
Plating:
Underplating: 50 μ” [1.27 μm] Nickel
Wiping Area: See Ordering Information
Solder Tails: See Ordering Information
Electrical
Current Rating:
Signal: 1.5 A - All contacts simultaneously
Insulation Resistance:
10
3
MΩ
Withstanding Voltage:
1,000 V
AC
Environmental
Temperature Rating:
-55°C to +125°C
Process Temperature Rating:
260°C (Profile per J-STD-020C)
Moisture Sensitivity Level:
1 (per J-STD-020C)
UL File No.: E68080
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
MetPak
™
2-FB Header
2 mm 4/5-Row, Vertical, Solder or Press-Fit Tail, Shouldered Pin
POSITION X
"A" 6.00
.236
2.00
.079
MP2 Series
POSITION 2
POSITION 1
15.80
.622
11.50
.453
1.40
.055
2.00
.079
17.00
.669
FOR SPECIAL MONOBLOCKS
AND PIN ARRANGEMENTS
CONTACT 3M SALES
REPRESENTATIVE
mm
[inch]
3.50
.138
12.00
.472
Tolerance Unless Noted
0
mm
±3
0.0
±0.3
0.00
±0.13
4 ROW PRODUCT
17.80
.701
13.52
.532
[ ] Dimensions for Reference Only
MATING LENGTH
"B" TAIL LENGTH
14.00
.551
E D C B A
ROW
"C"
5 ROW PRODUCT
SOLDER TAIL
PRODUCT
PRESS-FIT
PRODUCT
PRESS-FIT
PRODUCT
REAR
PLUG-UP
Note:
1. Refer to IEC 61076-4-104 Futurebus+
®
global standard.
2. “Press Fit” describes a contact tail having a compliant section designed to make a reliable electrical connection with a
plated through-hole (PTH) in a printed circuit board, typically a “back plane.”
Ordering Information
MP2 - HXXX - XXXX - S - XXXXX
H = Header
Pin Count
(See Table 1)
Rows
4 = 4 Rows
5 = 5 Rows
Loading Pattern
(See Table 2)
Plating Options:
(See Table 4)
Shouldered Pins
Tail Length
(See Table 3)
Termination Style
P = Press-Fit
S = Solder Tail
TS-1120-C
Sheet 2 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
MetPak
™
2-FB Header
2 mm 4/5-Row, Vertical, Solder or Press-Fit Tail, Shouldered Pin
Table 1 - Connector & Row Lengths
Pin
Count
024
048
072
096
120
144
168
192
030
060
090
120
150
180
210
240
Dim. “A”
mm [inch]
11.95 [0.471]
23.95 [0.943]
35.95 [1.415]
47.95 [1.889]
59.95 [2.36]
71.95 [2.833]
83.95 [3.305]
95.95 [3.778]
11.95 [0.471]
23.95 [0.943]
35.95 [1.415]
47.95 [1.888]
59.95 [2.361]
71.95 [2.833]
83.95 [3.305]
95.95 [3.778]
Dim “C”
mm [inch]
10.00 [0.394]
22.00 [0.866]
34.00 [1.339]
46.00 [1.811]
58.00 [2.283]
70.00 [2.756]
82.00 [3.228]
94.00 [3.701]
10.00 [0.394]
22.00 [0.866]
34.00 [1.339]
46.00 [1.811]
58.00 [2.283]
70.00 [2.756]
82.00 [3.228]
94.00 [3.701]
Rows
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
RF
(RIA E1 &
C1 apply)
(RIA E1 &
C1 apply)
KR
FJ
(RIA E1 &
C1 apply)
(RIA E1 &
C1 apply)
(RIA E1 &
C1 apply)
(RIA E1 &
C1 apply)
TR40B
TR30
MP2 Series
Solder
Tails
(RIA E3 &
C2 apply)
(RIA E3 &
C2 apply)
(RIA E3 &
C2 apply)
Table 4 - Plating Options
Plating
Suffix
TG
TG30
Press-Fit
Tails*
(RIA E2 &
C2 apply)
(RIA E2 &
C2 apply)
(RIA E2 &
C2 apply)
Plating Composition
0.25 μm [10 μ”] Min. Au Contact Area
2.54 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [50 μ”] Min. Ni all over
0.76 μm [30 μ”] Min. Au Contact Area
2.54 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [50 μ”] Min. Ni all over
0.08 μm [3 μ”] Min. Au Contact Area
0.67 μm [27 μ”] Min. PdNi Contact Area
2.54 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [50 μ”] Min. Ni all over
0.13 μm [5 μ”] Min. Hard Au Contact Area,
Lubricated
1.02 μm [40 μ”] Min. PdNi Contact Area
0.10 μm [4 μ”] Min. Pd Contact Area
2.54 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [50 μ”] Min. Ni all over
0.25 μm [10 μ”] Min. Au Contact Area
5.08 μm [200 μ”] Min. Matt Whisker Mitigating
Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
0.76 μm [30 μ”] Min. Au Contact Area
5.08 μm [200 μ”] Min. Matt Whisker Mitigating
Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
1.27 μm [50 μ”] Min. Au Contact Area, Lubri-
cated
5.08 μm [200 μ”] Min. Matt Whisker Mitigating
Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
0.08 μm [3 μ”] Min. Au Contact Area
0.67 μm [27 μ”] Min. PdNi Contact Area
5.08 μm [200 μ”] Min. Matt Whisker Mitigating
Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
0.13 μm [5 μ”] Min. Hard Au Contact Area,
Lubricated
1.02 μm [40 μ”] Min. PdNi Contact Area
0.10 μm [4 μ”] Min. Pd Contact Area
5.08 μm [200 μ”] Min. Matt Whisker Mitigating
Sn Tail Area
0.76 μm [30 μ”] Min. Au Dual Contact Areas
0.10 μm [4 μ”] Min. Au Needle Eye
1.27 μm [50 μ”] Min. Ni all over
(RIA E2 &
C2 apply)
(RIA E3 &
C2 apply)
Table 3 - Tail Length Options
Termination Option No.
Solder Tail
1
2
3
Press-Fit* Tail
1
4.60 [0.181]
3.53 [0.139]
Dim. “B”
LR
(RIA E1 &
C1 apply)
(RIA E1 &
C1 apply)
*Compliant-Pin Tail
5 (Contact 3M)
7 (Contact 3M)
2.72 [0.107]
13.60 [0.535]
17.00 [0.669]
PD
(RIA E1 &
C1 apply)
(RIA E1 &
C1 apply)
KV
(RIA E1 &
C1 apply)
(RIA E1 &
C1 apply)
Table 2 - Mate Length vs. Loading Pattern
Loading Pattern
Code
1
2
3
4
5
6
7
8
9
A
B
C
D
E
G
H
J
K
Description
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
Mate length
Row A
5.00 [0.197]
6.50 [0.256]
6.50 [0.256]
6.50 [0.256]
5.75 [0.226]
7.25 [0.285]
6.50 [0.256]
6.50 [0.256]
5.00 [0.197]
5.00 [0.197]
5.75 [0.226]
5.00 [0.197]
5.75 [0.226]
7.25 [0.285]
7.25 [0.285]
5.00 [0.197]
8.00 [0.315]
5.00 [0.197]
Mate length
Row B
5.00 [0.197]
5.00 [0.197]
5.75 [0.226]
6.50 [0.256]
7.25 [0.285]
5.75 [0.226]
5.75 [0.226]
5.00 [0.197]
6.50 [0.256]
5.75 [0.226]
5.75 [0.226]
5.00 [0.197]
5.75 [0.226]
7.25 [0.285]
5.75 [0.226]
5.75 [0.226]
8.00 [0.315]
6.50 [0.256]
Mate length
Row C
5.00 [0.197]
5.00 [0.197]
5.75 [0.226]
6.50 [0.256]
5.75 [0.226]
5.75 [0.226]
5.00 [0.197]
6.50 [0.256]
5.00 [0.197]
6.50 [0.256]
5.75 [0.226]
6.50 [0.256]
7.25 [0.285]
7.25 [0.285]
5.75 [0.226]
5.75 [0.226]
8.00 [0.315]
7.25 [0.285]
Mate length
Row D
5.00 [0.197]
5.00 [0.197]
6.50 [0.256]
6.50 [0.256]
5.75 [0.226]
5.75 [0.226]
5.00 [0.197]
6.50 [0.256]
5.00 [0.197]
5.75 [0.226]
5.75 [0.226]
5.00 [0.197]
5.75 [0.226]
7.25 [0.285]
5.00 [0.197]
7.25 [0.285]
8.00 [0.315]
6.50 [0.256]
Mate length
Row E
(5-Row Prod. Only)
5.00 [0.197]
5.00 [0.197]
6.50 [0.256]
6.50 [0.256]
5.75 [0.226]
5.75 [0.226]
5.00 [0.197]
6.50 [0.256]
5.00 [0.197]
5.00 [0.197]
5.75 [0.226]
5.00 [0.197]
5.75 [0.226]
7.25 [0.285]
5.00 [0.197]
7.25 [0.285]
8.00 [0.315]
5.00 [0.197]
TS-1120-C
Sheet 3 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
MetPak
™
2-FB Header
2 mm 4/5-Row, Vertical, Solder or Press-Fit Tail, Shouldered Pin
12.00
.472
16.00 MIN
.630
2.00
.079
2.00
.079
MP2 Series
1 6 .0 0 M IN
.6 3 0
A1
12.00
.472
"C"
12.00
.472
"D" PLATED THRU HO LE
Ø
0.10
2.00
.079
1.50
+.10
-.00
6.00
.236
UNPLATED
CENTER HOLES OPTIONAL
FOR 3M PRODUCT
Ø
.059
+.004
-.000
Ø
0.10
"D " P L A T E D T H R U H O L E
Ø
0 .1 0
RECOMMENDED 4 ROW SOLDER
TAIL PCB HOLE MOUNTING PATTERN
RECOMMENDED 4 ROW PRESS-FIT
Table 5 -- HOLE PLATING For TG, TG30, TR30, TR40B FINISHES ONLY
HOLE
“D”
Finished Dia. mm [in]
0.65-0.80 [.0256-.0315]
Cu Thickness mm [in]
0.025 [.001] min.
SnPb Thickness microns [μ”]
15 [600] max.
Drilled Hole Dia. mm [in]
0.81-0.86 [.0319-.0339]
Table 6 -- HOLE PLATING For FJ, KR, RF, LR, and PD FINISHES ONLY
Hole
“D”
Finished Dia.
mm [in]
0.700-0.800
[.0276-.0315]
Cu Thickness
mm [in]
0.025-0.045
[0.001-0.002]
Immersion
Matte Sn
Thickness
microns [μ”]
0.5 - 2.5
[20 - 100]
Electrolitic Au
Thickness
microns [μ”]
0.1 - 0.5
[4 - 20]
OSP ENTEK
Thickness
microns [μ”]
0.2 - 0.5
[8 - 20]
Drilled Hole Dia.
mm [in]
0.830-0.860 [.0330-.0340] or
0.85mm [ #66] TWIST DRILL
14.00
.551
6.00
.236
2.00
.079
18.00 MIN
.709
2.00
.079
"D " P L A T E D T H R U H O L E
Ø
0 .1 0
A1
12.00
.472
"C"
12.00
.472
2.00
.079
Ø
1.50
.059
+.10
-.00
+.004
-.000
"D" PLATED THRU HOLE
Ø 0.10
UNPLATED
CENTER HOLES OPTIONAL
FOR 3M PRODUCT
Ø 0.10
1 8 .0 0 M IN
.7 0 9
RECOMMENDED 5 ROW SOLDER
TAIL PCB HOLE MOUNTING PATTERN
RECOMMENDED 5 ROW PRESS-FIT
PCB HOLE MOUNTING PATTERN
TS-1120-C
Sheet 4 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase.
3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
1. UART Registers(1) FIFO Control Register (FCR)RXFIFTL: Receive FIFO interrupt trigger (an interrupt will be generated when the amount of data in the FIFO just reaches the required (trigger level));D...
{:1_108:}Notice: From December 17, 2018, the original "ST MEMS Sensor Technology Forum" was renamed "ST Sensor and Low Power Wireless Technology Forum". In addition to releasing ST sensor-related reso...
nmgST Sensors & Low Power Wireless Technology Forum
The notes are organized as follows. They are just the basics. If there are any mistakes, please correct them. There are still many things that I don’t understand. I will continue to update them in the...
Requirements: 1. Input voltage 85-265VAC, low power consumption, output 12v700MA, voltage error 1% 2. Certified export range hood products 3. The key point is to have low cost 4. Friends are welcome t...
I. Introduction Electric energy is the most important form of energy in human production and life. The rational, efficient, accurate and convenient use of electric energy is still a major ...[Details]
1 EASY CORE PLC chipset
EASY CORE is a core chipset loaded with the EASY embedded PLC software platform, which is used to design PLC. Its internal structure block diagram is shown in Figure 1. ...[Details]
On June 13, Jing Weihong, deputy director of the Technology Innovation Promotion Center of the Jiangxi Provincial Commission of Industry and Information Technology, Zhou Hongning, head of the Indus...[Details]
On February 14, at the Sichuan Chengdu Metropolitan Area Global Investment Promotion Conference held in Shanghai, the 15GWh Qingtao Energy Power Solid-State Battery Energy Storage Industrial Base with...[Details]
The concept of the 48V mild hybrid system is that based on the 48V power supply system, the car can integrate more high-power electrical appliances, allowing the car to better integrate other syste...[Details]
A well-known company in the field of gate driver technology for medium and high voltage inverter applications recently announced that its high-efficiency single-channel gate driver SIC118xKQ SCALE...[Details]
Although the electromagnetic flowmeter is an old-fashioned flowmeter, it has incomparable advantages over the new flowmeter: With the development of science and technology, new flow meters are consta...[Details]
Imagination Technologies recently announced the release of the new IMG B-series GPUs. Compared with the previous generation of the "strongest ever" A-series, the new B-series products have once again...[Details]
Recently, Smart Bud released the "2023 China Science and Technology Innovation Coordinate Report" and the "2023 Global Science and Technology Innovation Coordinate". OPPO was selected into the 2023 G...[Details]
Application industry: Chemical industry
Product: TDLS
Application Introduction
One of the main products of the electrolytic salt solution device is chlorine. If there is still water left ...[Details]
NXP Semiconductors LPC4350 is the first implementation of 32-bit ARM® Cortex™-M0/M4 on a single chip. The M4 can focus on high-speed data plane processing, while the M0 can handle low-speed control t...[Details]
The 2024 All Energy Australia Australian International Energy Exhibition opened grandly today at the Melbourne Convention and Exhibition Center.
Sofar New Energy made a shining appearance at bo...[Details]
DSP and ARM Processors
京公网安备 11010802033920号
EEWORLD
