PMA Series
DC/DC regulators
up to 16A / 80W
Key Features
• Surface mountable
• Low profile, max 8.5mm (0.33 in)
• High efficiency
• Low weight
• Designed For Environment, DfE
• Lead-free / Bromine-free
• Robust design
• Standard and full-feature versions
The PMA series of DC/DC regulators (POL) are
intended to be used as local distributed power
sources in distributed power architecture level 4. The
PMA series use a ceramic substrate with fine-pitch
components technology and a high degree of silicon
integration. Together with the electrical design using
low Rds-On MOSFET, this provides excellent thermal
management, high reliability and high efficiency. The
high efficiency makes it possible to operate over a
wide temperature range, without adding any external
heat dissipator. At forced convection cooling >1 m/s
(200 lfm), the PMA typically delivers full power up to
+80
°C
ambient temperature.
The high reliability and the low profile of the
PMA series makes them particularly suited for the
communications equipment of today and tomorrow
and applications with board spacing down to 15 mm
(0.6 in). The flat case top enables pick-and-place
handling and provides a surface for attachment to
cooling surfaces in areas with limited air flow.
These products are manufactured using the most
advanced technologies and materials to comply with
environmental requirements. Designed to meet high
reliability requirements of systems manufacturers, the
PMA responds to world-class specifications.
Ericsson Power Modules is an ISO 9001/14001
certified supplier.
E
Product Program
Input Voltage
3.0 - 3.6 V
Output Voltage
1.2 V
1.5 V
1.8 V
2.5 V
1.2 V
1.5 V
4.5 - 5.5 V
1.8 V
2.5 V
3.3 V
1.5 V
9.0 - 16.0 V
S = Surface mount
F = Full-filter feature
* adjustable from 1.0V to 2.3V out
** adjustable from 2.3V to 3.6V out
Output Current
12 A
12 A
12 A
12 A
12 A
12 A
12 A
12 A
12 A
16 A
16 A
16 A
Output Power
14.4 W
18.0 W
21.6 W
30.0 W
14.4 W
18.0 W
21.6 W
30.0 W
39.6 W
24.0 W
53.0 W
80.0 W
Part No.
PMA 4118L S/SF
PMA 4118H S/SF
PMA 4218G S/SF
PMA 4119 S/SF
PMA 5118L S/SF
PMA 5118H S/SF
PMA 5218G S/SF
PMA 5319 S/SF
PMA 5310 S/SF
PMA 8218H SF*
PMA 8510 SF**
PMA 8811 SF
3.3 V
5.0 V
Connections
Pin
1-2
3-4
5-6
7
8
1)
9
10
11
12
13
14
1)
2)
Mechanical data
Function
Positive output
Ground
1
14
Designation
+Out
GND
+In
Sync In
Sync select
Sync Out
RC
RC select
V
adj
+S
NC
Pin #1
ID mark
35.2
Pin 1
16,25
16,25
7,55
2,8 (x3)
2,2 (x7)
20
12,3
Synchronization input
Connect to ground
when used as slave
Synchronization output
Remote control
Select pin for neg./pos.
logic
2)
Output voltage adjust
Remote sensing
Not connected
7,7
Positive input
15,1
2 (x6)
6
7
3,5 (x6)
(29)
1,7 (x8)
3,5 (x8)
31.5
dimensions in mm
8.5
(36)
Applicable for 4000 and 5000 series.
Not connected (NC) for 8000 series.
Connect to -In for negative logic or leave open for
positive logic on RC pin.
New Product Overview is intended for discussion to determine interest and requirements. Information provided is
believed to be accurate and reliable. Ericsson Power Modules makes no commitment to sample or manufacture for sale
these products and reserves the right to make changes to the product, or information contained herein, without notice.
Ericsson Power Modules
SE-141 75 Kungens Kurva, Sweden
Telephone: +46 8 568 69620
For local sales contacts, please refer to our website
www.ericsson.com/powermodules
or call: Int +46 8 568 69620, Fax: +46 8 568 69599
Americas
Ericsson Inc., Power Modules
+1-877-374-2642
Asia/Pacific
Ericsson Ltd.
+852-2590-7152
New Product Overview
EN/LZT 146 011 R1D
© Ericsson Power Modules AB, August 2003
(15,4)