19013 36th Ave. West
Suite H
Lynnwood, WA 98036, USA
SM7745D Series
4 Pad 7 x 5mm Leadless Surface Mount Ceramic Clock Oscillator
CMOS with Enable/ Disable, 3rd Overtone Crystal Used
Low Jitter
Standard Specifications
Overall Frequency Stability
Operating Temperature Range
Supply Voltage (Vcc)
Symmetry (Duty Cycle)
Logic Levels
Jitter
Output Load
Enable/Disable Option (E/D)
SM7745D:
±
50 PPM, SM7744D:
±
25 PPM, SM7720D:
±
20 PPM over Operating Temp. Range
0 to +70°C is standard, but can be extended to
-
40 to +85°C for certain frequencies
5.0 volts, 3.3 volts and 2.5 volts available, .01 µF bypass cap recommended
40/60 to 60/40% is standard, but 45/55% at 50% of Vcc is also available (see Waveform 1)
Logic “1”
90% of Vcc MIN;
Logic “0”
10% of Vcc MAX
1 pS RMS maximum,
from 12 kHz to 20 MHz from carrier
Standard load is 15pF maximum, see Test Circuit 2 (consult factory for
heavier
loads)
Output enabled when Pin #1 is open or at Logic “1”; Output disabled when Pin #1 is at Logic “0”.
Supply Current
Icc (mA) w/ 15pF load
Typical
Maximum
Rise and Fall Time
Tr & Tf (nS) w/ 15pF load
Typical
Maximum
70.00 MHz
–
170.00 MHz
Consult factory for
higher
frequencies
Frequency Range
(MHz)
70.000 – 79.999
80.000 – 110.000
110.001 – 119.999
120.000 – 170.000
40.0
75.0
80.0
90.0
45.0
80.0
90.0
95.0
2.0
0.5
0.5
0.5
3.0
1.0
1.0
1.0
Part Numbering Guide
Packaging
Tray or
16mm tape
8mm pitch
SM77 45 D Y -- 70.0M - 30
Model
Frequency Stability
45 = ± 50 PPM
44 = ± 25 PPM
20 = ± 20 PPM
Non-Std Output Load
Blank = 15 pF max, 30 = 30 pF max, 50 = 50 pF max
Frequency in MHz
Special Specifications (choose all that apply)
Y: Std Specs (5.0V
± 10%,
0 to +70
°
C, 40/60% Symmetry)
E: Extended Operating Temperature Range (- 40 to +85
°
C)
S: 45/55% Symmetry at 50% of Vcc
V: Supply Voltage of 3.3 volts ±
10%
W: Supply Voltage of 2.5 volts ±
5%
Consult factory for available frequencies and specs. Not all options available for all frequencies. A special part number may be assigned.
Frequency Stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration and load
Mechanical: inches (mm)
not to scale
Solder Pads
.09 (2.2)
Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.
GND
.276 (7.0 ± .2)
2
OUT
3
.200 (5.08)
.130 (3.3)
3
2
0.01
m
F
bypass capacitor
PLE
1
E/D
4
Vcc
4
1
.07 (1.8)
.197
(5.0 ± .2)
.075 (1.9)
MAX
.08 (2.0)
Feb 2002
Pl tronics, Inc.
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com
6
Embedded System
京公网安备 11010802033920号
EEWORLD
