3M
™
PC Card Header
Single Slot, No Ejector
•
•
•
•
•
•
•
MCH Series
Meets PCMCIA specifications
Tapered header pins provide easy insertion
High temperature plastic insulator
Solder retention clips option for secure hold-down
Stand-off height options
ESD clips available
See Regulatory Information Appendix (RIA) for
chemical compliance information
Date Modified:
August 8, 2008
ED
TS-1108-C
Sheet 1 of 3
Physical
Insulation
Material: LCP
Insulation
Flammability: UL 94V-0
Insulation
Color: Black
Contact
Material: Copper Alloy
Plating
Underplating: 50
μ″
[ 1.27
μm
] Nickel
Plating
Solder Tails: 100
μ″
[ 2.54
μm
] Tin/Lead or Reflowed Tin (See Ordering Information)
Electrical
Withstanding Voltage:
500 V
RMS
for 1 Minute
Environmental
Temperature Rating:
Operating Environment:
-20°C to +60°C
,
95% RH Non-condensing
Process Temperature:
260°C (per J-STD-020C)
UL File No.: E68080
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
D
Current Rating:
0.5 A
Insulation Resistance:
> 5
×
10
9
Ω
at 500 V
DC
IS
Durability-Office Environment: 10,000 cycles minimum
Insertion Force: 8.8 lbs. ( 39.2 N ) maximum
Extraction Force: 1.5 lbs. ( 6.67 N ) minimum and 8.8 lbs. ( 39.2 N ) maximum
C
Mechanical:
O
Plating
Wiping Area: Gold flash over 27
μ″
[ 0.68
μm
] PdNi
N
TI
N
U
3M
™
PC Card Header
Single Slot, No Ejector
MCH Series
.137 ±.004
3.48 ±0.10
DETECT P INS
.197 ±.004
5.00 ±0.10
P OW ER PINS
2.345
59.56
2.018
51.26
.182
4.61
.032
0.83
.065
1.65
.301
7.65
.223
5.66
XXXX
.482
12.24
1.378
35.00
.167 ±.004
4.24 ±0.10
GENERA L USE P INS
.919
23.34
.732
18.59
ED
2.015
51.18
A
.050
1.27
PIN 35
P IN 36
C
L
O
N
TI
.138
3.51
N
2.134
54.20
PIN 34
.055
1.40
PIN 1
P IN 17
CC
L L
C
A
45° ±5°
1.650
41.91
PIN 51
.050
1.27
PIN 68
P IN 67
Ordering Information
D
IS
MCH - 068TAN - XX X X - XX
Plating Suffix:
TR30 = PdNi w/ Au flash and Sn-Pb solder tails (RIA E3 & C2 apply)
LL = PdNi w/ Au flash and Sn solder tails (RIA E1 & C1 apply)
ESD/Solder Retention Clips
A = No ESD, no solder retention clips
B = No ESD, solder retention clips
C = ESD, no solder retention clips
D = ESD, solder retention clips
E = ESD, metal solder retention clips
Insulator Body Style
01 = 1.38 mm standoff
02 = 4.0 mm standoff
03 = 7.0 mm standoff
Keying
Blank = 5.0 volt
3 = 3.3 volt
TS-1108-B
Sheet 2 of 3
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
RETE NT EXTENSION
INTO BOARD (OPTIONAL)
U
3M
™
PC Card Header
Single Slot, No Ejector
PC BOARD TO
CENTER LINE
MCH Series
.385
9.78
R
.030
0.76
TOTAL
COMPONENT
HEIGHT
C
L
HARDWARE
SEATING PLANE
2X "A"
.118 ±.010
3.00 ±0.25
SECTION A-A
STANDOFF HEIGHT
(OPTIONAL)
.065
1.65
.215
5.46
.140
3.56
.290
7.37
Part Description
ESD/Retention Clip Option
MCH-068TAN01XX-XX
MCH-068TAN02XX-XX
MCH-068TAN03XX-XX
.185
4.70
PIN 1
PIN 2
N
2.195
55.75
TI
N
U
-A-
PIN 67
PIN 68
Dim A" PCB To Hardware Retention Clip Extention
Standoff
Seating Plane "
Into board
Height
B
D
B
D
.161 [4.09]
.175 [4.44] .079 [2.01] .065 [1.65] .054 [1.37]
.264 [6.71]
.278 [7.06] .086 [2.18] .072 [1.83] .157 [4.00]
.382 [9.70] .396 [10.06] .108 [2.74] .094 [2.39] .275 [7.00]
ED
PC Board To Total Component
Center Line
Height
.152 [3.87]
.256 [6.50]
.374 [9.50]
.251 [6.37]
.354 [9.00]
.472 [12.0]
PIN 33
PIN 34
.075
1.91
.075
1.90
.075
1.90
C
D
IS
-B-
.165
4.19
±.002
O
.039 ±0.05
PIN 35
0.99
PIN 36
l O
.002 [0.05]
M
A B
.050
1.27
O
2.018
51.26
1.650
41.91
.339
8.61
O
.002 ±.002
0.05 ±0.05
PLATED THRU TO GROUND
l O
.002 [0.05]
M
A B
.455
11.56
INSERT CARD
NO COMPONENTS
RECOMMENDED MOUNTING HOLE LAYOUT
STANDOFF FOOTPRINT
TS-1108-B
Sheet 3 of 3
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/
EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/17/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision
2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in
writing, this information represents 3M’s best knowledge and belief based upon information provided by third party
suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
D
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
IS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon
information provided by third party suppliers to 3M.
C
O
Appendix E3: European Union RoHS
N
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
TI
N
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/
EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
U
ED
RIA-2217-A
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits
for Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006,
means that the product or part
does not
contain any of the following substances in excess of the following maximum
concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium,
polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise
stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by
third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
20
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the
accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended
application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s
current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in
writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase.
3M MAKES NO
OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE.
If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s
option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except where prohibited by law, 3M will not be liable for
any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
3
Electronic Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
800/225-5373
www.3M.com/interconnects
RIA-2217-A
© 3M 2007
D
IS
C
O
N
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform
with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in
accordance with the product Warranty stated below.
Name and Content of Hazardous Substances or Elements
TI
N
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits
for Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006,
means that the product or part
does
contain a substance, as detailed in the chart below, in excess of the following
maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless
otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
U
ED
京公网安备 11010802033920号
EEWORLD
