-
Researchers at Germany's Fraunhofer ISE institute have introduced a new medium-voltage string inverter for large power plants.
The research institute claims that the concept is a world first i...[Details]
-
1 Introduction
Design for test (DFT) is a technology that emerged to meet the development requirements of integrated circuits. Its main task is to adjust the structure of the circuit to improve ...[Details]
-
OnePlus CEO Pete Lau has confirmed that the company is preparing to launch a second 5G phone before the end of 2019, this time for global markets, according to a report in the Financial Times. ...[Details]
-
Abstract: The phenomenon of achieving zero current ripple on one of the two inductors after the two inductors are coupled to each other is studied. The conditions for achieving zero ripple are disc...[Details]
-
introduce:
This example shows a typical automotive charging and distribution system. Driving a car in conditions such as rainy nights and heavy traffic consumes a lot of electrical energy. The...[Details]
-
Calculation of transmission ratio of fixed axis gear train
1. Calculation of transmission ratio of fixed-axis gear train
The ratio of the rotation speed or angular velocity be...[Details]
-
The MAX15053 high-efficiency, current-mode, synchronous step-down switching regulator integrates an integrated power switch and can deliver up to 2A of output current. The device operates from a 2.7V ...[Details]
-
The working principle of the ultrasonic depth sounder is designed based on the principle that ultrasonic waves can propagate in a uniform and straight line in a uniform medium and produce reflections...[Details]
-
AVRPRO programmer is a special programming tool designed for ATMEL's 90 series AVR RISC microcontroller. This product only has software part, no hardware support is required, and only 4 wires are nee...[Details]
-
According to Taiwan Electronics Times on February 20, the semiconductor supply chain stated that not only did TSMC’s existing process capacity utilization rebound, its 2-nanometer progress was also b...[Details]
-
In Arduino, you can use AnalogWrite to use hardware to generate 490Hz/980Hz PWM waves, and set the duty cycle according to parameters. Students who don't know this can go to AnalogWrite to learn. Sec...[Details]
-
#include reg51.h
sbit p10=P1^0;
sbit p17=P1^7;
unsigned char c;
unsigned char k;
unsigned int k2,k1;
bit p;...[Details]
-
Negative feedback is widely used in electronic circuits. The use of negative feedback is at the expense of reducing the amplification factor. The purpose is to improve the working performance of the ...[Details]
-
Makefile uart_interrupt.bin : start.s function.c arm-linux-gcc -g -c -o start.o start.s arm-linux-gcc -g -c -o function.o function.c arm-linux-ld -Ttext 0x30000000 -g start.o function.o -o ua...[Details]
-
CAN bus (Controller Area Network) is a communication protocol used in the automotive and industrial fields. It has high reliability, real-time and flexibility, and is widely used in the fields of a...[Details]
Talking
京公网安备 11010802033920号
EEWORLD