Elite
CS-18
Normally Open
High Power DC-12GHz Multi - Throw Switch
SP3T to SP6T versions only
The CS-18 Switch is a broadband multi-position coaxial switch designed to switch RF
signals from one input port to any one of 3 through 6 output ports. It is readily adapted to any
50 Ohms transmission line system. The standard actuator gives individual solenoid control of
each position and when de-energized, all positions are open. Standard actuator voltage is 28
VDC. The primary advantage of this switch over the min-
iature versions shown on previous pages is the higher
power handling capability.
12
15
28
Specifications
RF Contacts:
Actuator
Break before make
Voltage (VDC) 20
O
C
Current (mA)
Switching Time:
Connectors:
Weight:
20 msec max
600 480 270
SP7T and SP8T version available. See additional
datasheets
SMA (f), TNC(f)(max frequency 11GHz only)*, N Type (f)
9 oz. max (3 Position) 11 oz (6 Position)
Temperature Range:
-55
O
C to +85
O
C (Operating)
Shock:
Vibration:
Humidity:
Typical
Contact Life:
RF Power Handling
MIL-STD-202 Method 213, Condition D (500G Non Operating)
MIL-STD-202 Method 214, Condition D (10G RMS Non Operating)
Moisture Seal Available
5
Million
Cycles
3000
Typical Performance
Hig
h
800
400
Sta
n
dar
d
nne
Power CW (Watts)
NT
ype
cto
rs
Co
nne
200
cto
rs
15
80
40
25
Return Loss
Po
we
r
Co
10
0.01
0.1
1.0
4.0
Frequency GHz
10
18
26.5
Frequency GHz
12.0
0.0
Specifications
VSWR (max)
Insertion Loss (max)
Isolation (min)
DC-1 GHz 1-4 GHz
1.25:1
0.30 dB
70.0 dB
1.40:1
0.40 dB
60.0 dB
4-12 GHz (TNC 11GHz only)
0.4
1.70:1
0.50 dB
60.0 dB
IL dB
60
70
80
90
0.01
Frequency GHz
12.0
Specifications subject to change without notice.
www.teledynecoax.com
email: coax@teledyne.com
Tel: (800) 351-7368
10/2007
Isolation dB
High Power DC-12GHz Multi - Throw Switch
SP3T to SP6T versions only
Normally Open
Elite
CS-18
Analog
Indicators
TTL
SP6T
H = 2.15 STD Model
H = 2.65 TTL Model
SP5T
SP4T
SP3T
Part Numbering System for CS-18 (Normally Open)
CS-18 N 1 5 O - T
Series
Connectors
Actuator Voltage
Connector
S: SMA Female
N: N type Female
T: TNC Female*
Actuator Voltage
1: 28Vdc Normally Open
2: 15Vdc Normally Open
3: 12Vdc Normally Open
Number of
Positions
3: SP3T
4: SP4T
5: SP5T
6: SP6T
Options
Actuator Type
Number of Switch Positions
Actuator Type
O: No Indicator Contacts
C: Indicator Contacts
Options
T: TTL Drivers with Diodes
R: Positive + Common
TD: TTL Driver with Decoder
For other options contact Factory
See additional Datasheet for SP7T and SP8T versions
Specifications subject to change without notice.
www.teledynecoax.com
email: coax@teledyne.com
Tel: (800) 351-7368
10/2007
京公网安备 11010802033920号
EEWORLD
