: .......................................................................16 detents with 2.5 Ncm (+/- 30%) or no detents
Outer shaft
1
:......................................................................32, 16 or no detents
For 32 detents: 0.5, 1.0 or 2.0 Ncm (+/- 30%)
For 16 detents: 1.5 or 2.5 Ncm (+/- 30%)
Rotational life:
2
..................................................................1,000,000 revolutions min. with 0.5, 1.0 or 1.5 Ncm switching torque or with no detents
500,000 revolutions min. with 2.0 Ncm switching torque
300,000 revolutions min. with 2.5 Ncm switching torque
Residual switching torque (end of life): ................................90% typ.
Shaft strength: ...................................................................100 N min. push, 100 N min. pull, 50 Ncm min. bending
Fastening torque of nut: .....................................................100 Ncm max.
Shock: ...............................................................................100 G max. (MIL-STD-202G, method 213B, condition C)
Flammability:.....................................................................UL94-V0 (IP65/IP68: O-rings and non-threaded bushing gasket are UL94-HB)
Packaging Sizes
Tray: .................................................................................20 pcs. (nuts are supplied and packed separately)
Additional Data for Push Button Switch
Mechanical Data
Push button actuation force (new condition): ........................6 N (+/- 30%)
Push button switch travel: ...................................................0.5 (+/- 0.2) mm
Push button switch life:
2
......................................................200,000 actuations min.
Residual push button actuation force (end of life): ................90% typ.
Electrical Data
Contact bouncing time: ......................................................2 ms max.
Dielectric withstanding voltage to housing/shaft:..................500 VDC during 60 seconds (MIL-STD-202G, method 301)
I really don't understand why something that does more harm than good has happened again on Taobao.
When shopping on Taobao, I found that the order information was wrong. I canceled the order before p...
This is a circuit built with an op amp. Using the virtual short and virtual open methods, we can analyze that the current flowing through RL has nothing to do with the resistance value of RL, but only...
These are some LLC design materials I have collected. I hope they can help you learn. If you have better materials, please feel free to upload them....
From: https://www.hackster.io/sbcomponentsuk/the-raspberry-pi-based-smartphone-7ed856StoryEver thought about customizing your smartphone? This article will introduce a Raspberry Pi-based smartphone wi...
[i=s]This post was last edited by hujj on 2020-9-23 13:19[/i]Sorry! The post was mistakenly posted to the [Power Technology] section. Here is a link to avoid wasting resources by posting repeatedly: h...
1 Introduction
DC regulated power supplies have been widely used in many industrial fields. In industrial production (such as electric welding, electroplating or DC motor speed regulation, etc.), a...[Details]
When the meat grinder is working, the raw meat passes through the rotating blade on the orifice plate, and the raw material is continuously discharged from the machine under the effect of the screw...[Details]
introduction With the rapid development of information technology, especially in the field of microprocessors, the number of integrated transistors inside microprocessors has increased dramatically,...[Details]
Introduction Most of the intelligent instruments now have intelligent interfaces and need centralized monitoring. Therefore, the stability of the centralized controller determines the stability ...[Details]
At present, the global automobile industry is facing huge challenges from the financial crisis and energy and environmental issues. The electrification of automobile energy power systems has become a ...[Details]
At present, most school classrooms still use manual control switches for lighting, but due to people's indifference to energy conservation and poor management, even in the case of abundant natural...[Details]
Since Cortex-M3 supports bit operations, you can use ordinary load/store instructions to read and write single bits.
Among the bit-banding supported by CM3 , bit-banding is implemented in tw...[Details]
1. Principle When the fluid flow sensor along the axial direction enters the product, it is forced to rotate around the center line under the action of the vortex generator, generating a vortex flow....[Details]
Lights were originally used as a tool for lighting, lighting up the dark night for people. With the continuous changes of the times, they have now become more of a form of expression to highlight per...[Details]
Shanghai Chushan Electronic Technology Co., Ltd. (hereinafter referred to as "Chushan Innovation") announced that it has obtained a total of tens of millions of RMB in Pre-A+ and A rounds of financin...[Details]
Mouser Electronics, the authorized global distributor of the latest semiconductors and electronic components, is now stocking the i.MX 8M series of application processors from NXP Semiconductors . T...[Details]
First, assume that the page size of the flash chip is 2K + 64B. According to 4.3.7 4-BIT ECC PROGRAMMING GUIDE (ENCODING) of the User Manual of S5PV210 , the encoding steps of 4-bit ecc are as follo...[Details]
ECU diagnosis and flashing solutions
ECU (Electronic Control Unit) is the core component of the automotive electronic control system, responsible for monitoring and controlling the o...[Details]
According to industry sources, IC design companies in Taiwan, especially those engaged in consumer IC design, are facing pressure to pass on costs as customers are increasingly unwilling to accept fu...[Details]
When repairing a radio, if there is a signal generator or signal tracer, it will bring a lot of convenience to the maintenance work. Here is a small signal tracer and generator circuit. Its structure...[Details]
Talking
京公网安备 11010802033920号
EEWORLD
