REVISION AC
DO NOT
SCALE FROM
THIS PRINT
(No OF POS x .100 [2.54])
.010 [.25]
SSM-1XX-XXX-DV-XX-XX-X-XX
No OF POSITIONS
-02 THRU -40
(PER ROW) (SEE NOTE 7)
AC
PLATING
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA
MATTE TIN ON TAIL
-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT
AREA MATTE TIN ON TAIL
-T: MATTE TIN CONTACT AND TAIL
-F: 3µ" FLASH SELECTIVE GOLD
CONTACT, MATTE TIN ON TAIL
-H: 30µ" HEAVY GOLD IN CONTACT AREA
3µ" ON TAIL
-STL: 30µ" SELECTIVE GOLD IN CONTACT AREA
TIN/LEAD (90/10+/-5%) TAIL
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA
MATTE TIN ON TAIL
-LM: 10µ" LIGHT SELECTIVE GOLD IN CONTACT
AREA MATTE TIN TAIL
-TM: MATTE TIN CONTACT AND TAIL
-FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT
AREA MATTE TIN TAIL
OPTION
-A: ALIGNMENT PIN (SEE FIG 3, SHT 2)
(MOLDED: USE NSSM-XX-DV-XX, 4 POS MIN)
-P: PICK & PLACE PAD (SEE NOTE 5)
(USE PPP-01, SEE FIG 4, SHT 2)
-M: METAL PICK & PLACE PAD (SEE NOTE 5)
AC
(USE LMP-02, SEE FIG 5, SHT 2)
-K: POLYIMIDE FILM PAD
(POS 2 THROUGH 40 - SEE NOTE 5)
(USE K-500-300, SEE FIG 6, SHT 2)
-TR: TAPE & REEL (SEE FIG 8, SHT 2-
29 POSITIONS MAX)
OPTION
-BE: BOTTOM ENTRY
(ONLY AVAILABLE ON -DV)
(FOR -DV SEE NSSM-50-DV-XX)
POLARIZING OPTION
-XX: POSITION TO BE POLARIZED
(USE PK-06-N) (SEE FIG 7, SHT 2)
(NOT AVAILABLE WITH -BE OPTION)
MOUNTING OPTION
-LC: LOCKING CLIP
(USE LC-05-TM)(SEE FIG 2)(SEE NOTE 8)
(No OF POS -1) x .100 [2.54]
.050 1.27
.020 0.51 REF
02
.103 2.62
REF
01
C1
.200 5.08
REF
2° MAX SWAY
(TYP)
NSSM-50-DV
"A"
SEE NOTE 4
ROW SPECIFICATION
-DV: DOUBLE VERTICAL
(USE NSSM-XX-DV-XX)
C-137-01-XXX
.290 7.37
REF
C2
C4
C3
90°
- 1°
+4°
.0060
.043 1.09
.277 7.03
"A"
FLUSH TO
.005 [.13] MAX
(SEE NOTE 6)
SECTION "A"-"A"
IN-PROCESS
NOTES:
1.
C
REPRESENTS A CRITICAL DIMENSION.
2. PULLOUT FORCE TO BE: 1 lb MIN.
3. MAXIMUM CUT FLASH: .010.
4. CUT PARTS MAY OR MAY NOT HAVE NOTCHES
5. -P OPTION: 4 POSITION AND UNDER TO BE -T/R
-M OPTION: 3 POSITION AND UNDER TO BE -T/R
-K OPTION: 3 POSITION AND UNDER TO BE -T/R
ALL OTHER POSITIONS WITH -P, -M, -K OPTIONS ARE
TO BE TUBED, UNLESS -TR ORDERED BY CUSTOMER.
6. FLUSH DIMENSION MUST BE INSPECTED ON BOTH ROWS
OF ASSEMBLY.
7. -40 MAX POSITION AVAILABLE, -50 FOR STOCK ONLY
8. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION
IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS
MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.
FIGURE 2
-LC: LOCKING CLIP OPTION
LC-05-TM
.050 1.27
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
ANGLES
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
.010 0.25 REF
(No OF POS -2) x .100 [2.54]
2° MAX TOE
(ANY DIRECTION)
.056 1.42 REF
.XX: .01 [.3]
2
.XXX: .005 [.13]
.XXXX: .0020 [.051]
MATERIAL:
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Ma il info @SAMTEC.c o m
c o d e 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:0.4
BODY: VECTRA E130i, LCP UL 94 VO
CONTACT: PHOS BRONZE
.100 C.L. DOUBLE VERTICAL SMT SOCKET STRIP
DWG. NO.
SSM-1XX-XXX-DV-XX-XX-X-XX
F:\DWG\MISC\Mktg\SSM-1XX-XXX-DV-XX-XX-X-XX-MKT.SLDDRW
BY:
KEVIN B
3/8/2000
SHEET
1
OF
2
REVISION AC
NSSM-XX-DV-XX
02
01
FIGURE 8
FIGURE 3
-A: ALIGNMENT PIN
MOLDED (4 POSITION MIN)
(No OF POS -2) x .100 [2.54]
REF
TAPE & REEL VIEW
.050 1.27
58
57
DIA. .038 0.97 REF
USER DIRECTION OF UNREELING
POCKET NOT DETAILED
FIGURE 4
-P: PICK & PLACE PAD
"R"
"S" .010 [.25]
"R" = No OF POS x .100 [2.54]
"S" EVEN = "R"/2 - .1975 [5.017]
"S" ODD = "R"/2 - .2475 [6.287]
FIGURE 6
-K: POLYIMIDE FILM PAD
"R"
"S" .010 [.25]
"R" = No OF POS x .100 [2.54]
"S" = "R"/2 - .128 [3.25]
.195 4.95 REF
.395 10.03 REF
PPP-01
.050 1.27 REF
.256 6.50
.295 7.49
FIGURE 5
-M: METAL PICK & PLACE PAD
"R"
LMP-02
AC
"S" .010[.25]
"R" = No OF POS x .100 [2.54]
"S" = "R"/2 - .1195 [2.858]
PT-1-24-03-15
.280 7.11 REF
OPTION
-K, -M -LC-K, -LC-M, -A-K,
NONE, -LC, -A, -P-LC, -P
TABLE 1
PACKAGING TUBE
PT-1-24-01-103
PT-1-24-03-15
PLUG
TP-09
TP-03
POSITIONS ALLOWED
02 THRU 40
02 THRU 40
.225 5.72 REF
.008 0.21 REF
PT-1-24-01-103
FIGURE 7
POLARIZING POSITIONS
72
02
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Ma il info @SAMTEC.c o m
c o d e 55322
DESCRIPTION:
DO NOT SCALE DRAWING
.100 C.L. DOUBLE VERTICAL SMT SOCKET STRIP
DWG. NO.
71
01
F:\DWG\MISC\Mktg\SSM-1XX-XXX-DV-XX-XX-X-XX-MKT.SLDDRW
SHEET SCALE: 1:0.4
SSM-1XX-XXX-DV-XX-XX-X-XX
BY:
KEVIN B
3/8/2000
SHEET
2
OF
2
DSP and ARM Processors
京公网安备 11010802033920号
EEWORLD
