Guard Ring Die Construction for Transient Protection
Low Forward Voltage Drop
Very Low Leakage Current
Highly Stable Oxide Passivated Junction
High Forward Surge Current Capability
Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Qualified to AEC-Q101 Standards for High Reliability
PPAP Capable (Note 4)
Mechanical Data
Case: PowerDI 5
Case Material: Molded Plastic, “Green” Molding Compound;
UL Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Finish – Matte Tin Annealed over Copper Leadframe;
Solderable per MIL-STD-202, Method 208
Polarity: See Diagram
Weight: 0.096 grams (Approximate)
®
PowerDI5
Top View
Bottom View
Ordering Information
(Note 5)
Part Number
PDS3200-13
PDS3200Q-13
Notes:
Qualification
Commercial
Automotive
Case
PowerDI5
PowerDI5
Packaging
5,000/Tape & Reel
5,000/Tape & Reel
1. EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. All applicable RoHS exemptions applied.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and
Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally
the same, except where specified. For more information, please refer to https://www.diodes.com/quality/.
5.
For packaging details, go to our website at https://www.diodes.com/design/support/packaging/diodes-packaging/.
Marking Information
PowerDI5
S3200 = Product Type Marking Code
= Manufacturer’s Code Marking
YYWW = Date Code Marking
YY = Last Two Digits of Year (ex: 18 for 2018)
WW = Week Code (01 to 53)
K = Factory Designator
PowerDI is a registered trademark of Diodes Incorporated.
The minimum microcontroller system , or the minimum application system, refers to a system in which a microcontroller can work using the least number of components .
For the 51 series single-chip micr...
This content is originally created by EEWORLD forum user huzhenhua . If you need to reprint or use it for commercial purposes, you must obtain the author's consent and indicate the source.6-pin power ...
I would like to ask you experts, the project needs to use USB 5V charging, and I am going to use BQ21040 to make a single-cell lithium battery charging protection circuit. Does the battery need an add...
What is NB-lot?
NB-IoT, or Narrow Band-Internet of Things, has the characteristics of low cost, low power consumption, and wide coverage (cellular network). It is positioned in the carrier-grade, low-...
Since the maximum input voltage of MPS2307DN is 23V, but the current circuit requires 24V input and 3.3 and 5V output, MPS2307 cannot be used. I am looking for a compatible chip. It is best if the PCB...