Board cutout cannot be used as a hole or slot. It can only be used as an absolute reference (3D effect). It cannot be converted into Gerber elements for forming processing. If you need to design holes...
Engineers, please take your positions. Engineers, please take your positions.
January 14, 10:00am-12:00pm
Keysight Technologies metrology expert starts online live lecture: Discussion on the basics of...
a) Install the correct emulator driver. I use Hezhongda's XDS510-USB2.0 emulator. After successfully installing the driver, open the "Device Manager" and you will see the effect as shown below.
b) The...
//This platform is msp430f149#includemsp430.hvoid select_xt2(void){unsigned char i;/*------Select the system main clock as 8MHz-------*/BCSCTL1 = ~XT2OFF; //Turn on the XT2 high-frequency crystal osci...