SMBG5333 thru SMBG5388B, e3
SMBJ5333 thru SMBJ5388B, e3
SURFACE MOUNT 5.0 Watt ZENER DIODES
SCOTTSDALE DIVISION
DESCRIPTION
The SMBJ5333-5388B or SMBG5333-5388B series of surface mount 5.0
watt Zeners provides voltage regulation in a selection from 3.3 to 200 volts
with different tolerances as identified by suffix letter on the part number. It is
equivalent to the JEDEC registered 1N5333 thru 1N5388B with identical
electrical characteristics and testing as well as RoHS Compliant with an e3
suffix. It is available in J-bend design (SMBJ) with the DO-214AA package
for greater PC board mounting density or in Gull-wing design (SMBG) in the
DO-215AA for visible solder connections. These plastic encapsulated
Zeners have a moisture classification of Level 1 with no dry pack required
and are also available in military equivalent screening levels by adding a
prefix identifier as further described in the Features section. Microsemi also
offers numerous other Zener products to meet higher and lower power
applications.
IMPORTANT:
For the most current data, consult
MICROSEMI’s
website:
http://www.microsemi.com
APPEARANCE
WWW .
Microsemi
.C
OM
NOTE: All SMB series are
equivalent to prior SMS package
identifications.
FEATURES
Surface mount equivalent to 1N5333 to 1N5388B
Ideal for high-density and low-profile mounting
Zener voltage available 3.3V to 200V
Standard voltage tolerances are plus/minus 5% with
B suffix and 10 % with A suffix identification
•
Tight tolerances available in plus or minus 2% or 1%
with C or D suffix respectively
•
Options for screening in accordance with MIL-PRF-19500
for JAN, JANTX, and JANTXV are available by adding
MQ, MX, or MV prefixes respectively to part numbers.
APPLICATIONS / BENEFITS
•
Regulates voltage over a broad operating
current and temperature range
•
Wide selection from 3.3 to 200 V
•
Nonsensitive to ESD
•
Withstands high surge stresses
•
Minimal changes of voltage versus current as
specified by voltage regulation
(ΔV
Z
)
•
High specified maximum current (I
ZM
) when
adequately heat sinking
•
Moisture classification is Level 1 with no dry
pack required per IPC/JEDEC J-STD-020B
MECHANICAL AND PACKAGING
•
CASE: Void-free transfer molded thermosetting
epoxy body meeting UL94V-0
•
TERMINALS: Gull-wing or C-bend (modified J-
bend) tin-lead or RoHS compliant annealed
matte-Tin plating solderable per MIL-STD-750,
method 2026
•
POLARITY: Cathode indicated by band. Diode
to be operated with the banded end positive
with respect to the opposite end.
•
MARKING: Part number without SMBx prefix
(e.g. 5333B, 5333Be3, MX5348C, 5376D, etc.)
•
TAPE & REEL option: Standard per
EIA-481-1-
A
with 12 mm tape, 750 per 7 inch reel or 2500
per 13 inch reel (add “TR” suffix to part number)
•
WEIGHT: 0.1 grams
•
See package dimensions on last page
•
•
•
•
•
RoHS compliant devices available by adding an “e3” suffix
MAXIMUM RATINGS
•
Power dissipation at 25
º
C: 5.0 watts (also see
derating in Figure 1).
•
Operating and Storage temperature: -65
º
C to
+150
º
C
•
Thermal Resistance: 25
º
C/W junction to lead, or
90
º
C/W junction to ambient when mounted on FR4
PC board (1oz Cu) with recommended footprint (see
last page)
•
Steady-State Power: 5 watts at T
L
< 25
o
C, or 1.38
watts at T
A
= 25
º
C when mounted on FR4 PC board
with recommended footprint (also see Figure 1)
•
Forward voltage @1.0 A: 1.2 volts (maximum)
•
Solder Temperatures: 260
º
C for 10 s (maximum)
SMBG(J)533–5388B, e3
Copyright
©
2007
6-21-2007 REV E
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1
SMBG5333 thru SMBG5388B, e3
SMBJ5333 thru SMBJ5388B, e3
SURFACE MOUNT 5.0 Watt ZENER DIODES
SCOTTSDALE DIVISION
WWW .
Microsemi
.C
OM
ELECTRICAL CHARACTERISTICS @ T
L
= 30
o
C
TYPE NUMBER
GULL-
WING
LEAD
SMBG5333B
SMBG5334B
SMBG5335B
SMBG5336B
SMBG5337B
SMBG5338B
SMBG5339B
SMBG5340B
SMBG5341B
SMBG5342B
SMBG5343B
SMBG5344B
SMBG5345B
SMBG5346B
SMBG5347B
SMBG5348B
SMBG5349B
SMBG5350B
SMBG5351B
SMBG5352B
SMBG5353B
SMBG5354B
SMBG5355B
SMBG5356B
SMBG5357B
SMBG5358B
SMBG5359B
SMBG5360B
SMBG5361B
SMBG5362B
SMBG5363B
SMBG5364B
SMBG5365B
SMBG5366B
SMBG5367B
SMBG5368B
SMBG5369B
SMBG5370B
SMBG5371B
SMBG5372B
SMBG5373B
SMBG5374B
SMBG5375B
SMBG5376B
SMBG5377B
SMBG5378B
SMBG5379B
SMBG5380B
SMBG5381B
SMBG5382B
SMBG5383B
SMBG5384B
SMBG5385B
SMBG5386B
SMBG5387B
SMBG5388B
C-BEND
(MOD.
“J”)
SMBJ5333B
SMBJ5334B
SMBJ5335B
SMBJ5336B
SMBJ5337B
SMBJ5338B
SMBJ5339B
SMBJ5340B
SMBJ5341B
SMBJ5342B
SMBJ5343B
SMBJ5344B
SMBJ5345B
SMBJ5346B
SMBJ5347B
SMBJ5348B
SMBJ5349B
SMBJ5350B
SMBJ5351B
SMBJ5352B
SMBJ5353B
SMBJ5354B
SMBJ5355B
SMBJ5356B
SMBJ5357B
SMBJ5358B
SMBJ5359B
SMBJ5360B
SMBJ5361B
SMBJ5362B
SMBJ5363B
SMBJ5364B
SMBJ5365B
SMBJ5366B
SMBJ5367B
SMBJ5368B
SMBJ5369B
SMBJ5370B
SMBJ5371B
SMBJ5372B
SMBJ5373B
SMBJ5374B
SMBJ5375B
SMBJ5376B
SMBJ5377B
SMBJ5378B
SMBJ5379B
SMBJ5380B
SMBJ5381B
SMBJ5382B
SMBJ5383B
SMBJ5384B
SMBJ5385B
SMBJ5386B
SMBJ5387B
SMBJ5388B
REGULATOR
VOLTAGE
TEST
CURRENT
MAXIMUM
DYNAMIC
IMPEDANCE
MAXIMUM
REVERSE
CURRENT
I
R
TEST
VOLTAGE
(V
Z
)
V
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.0
6.2
6.8
7.5
8.2
8.7
9.1
10
11
12
13
14
15
16
17
18
19
20
22
24
25
27
28
30
33
36
39
43
47
51
56
60
62
68
75
82
87
91
100
110
120
130
140
150
160
170
180
190
200
(I
Z
)
mA dc
380
350
320
290
260
240
220
200
200
175
175
150
150
150
125
125
100
100
100
75
75
70
65
65
65
50
50
50
50
50
40
40
30
30
30
25
25
20
20
20
20
20
15
15
15
12
12
10
10
8.0
8.0
8.0
8.0
5.0
5.0
5.0
(Z
Z
)
(A&B Suffix)
(V
R
)
(Non-Suffix &
A Suffix)
I
R
TEST
VOLTAGE
(I
R
)
μA
300
150
50
10
5.0
1.0
1.0
1.0
1.0
10
10
10
10
7.5
5.0
5.0
2.0
1.0
1.0
1.0
1.0
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
(V
R
)
(B,C,D Suffix)
MAXIMUM
REGULATOR
CURRENT
(I
ZM
)
(B,C,D Suffix)
MAXIMUM
DYNAMIC KNEE
IMPEDANCE
Z
ZK
AT 1.0Ma
(A,B,C,D Suffix)
MAXIMUM
SURGE
CURRENT
MAXIMUM
VOLTAGE
REGULATION
(I
ZSM
)
AMPS
20
18.7
17.6
16.4
15.3
14.4
13.4
12.7
12.4
11.5
10.7
10
9.5
9.2
8.6
8.0
7.5
7.0
6.7
6.3
6.0
5.8
5.5
5.3
5.1
4.7
4.4
4.3
4.1
3.9
3.7
3.5
3.3
3.1
2.8
2.7
2.5
2.3
2.2
2.1
2.0
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.2
1.1
1.1
1.0
1.0
0.9
0.9
(ΔV
Z
)
(A,B,C,D
Suffix)
OHMS
3.0
2.5
2.0
2.0
2.0
1.5
1.0
1.0
1.0
1.0
1.5
1.5
2.0
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.0
3.0
3.5
3.5
4.0
5.0
6.0
8.0
10
11
14
20
25
27
35
40
42
44
45
65
75
75
90
125
170
190
230
330
350
380
430
450
480
V
1.0
1.0
1.0
1.0
1.0
1.0
2.0
3.0
3.0
4.9
5.4
5.9
6.25
6.6
7.2
8.0
8.6
9.4
10.1
10.8
11.5
12.2
13
13.7
14.4
15.8
17.3
18
19.4
20.1
21.6
23.8
25.9
28.1
31
33.8
36.7
40.3
43
44.6
49
54
59
63
65.5
72
79.2
86.4
93.6
101
108
115
122
130
137
144
V
1.0
1.0
1.0
1.0
1.0
1.0
2.0
3.0
3.0
5.2
5.7
6.2
6.6
6.9
7.6
8.4
9.1
9.9
10.6
11.5
12.2
12.9
13.7
14.4
15.2
16.7
18.2
19
20.6
21.2
22.8
25.1
27.4
29.7
32.7
35.8
38.8
42.6
45.5
47.1
51.7
56
62.2
66
69.2
76
83.6
91.2
98.8
106
114
122
129
137
144
152
mA
1440
1320
1220
1100
1010
930
865
790
765
700
630
580
545
520
475
430
395
365
340
315
295
280
264
250
237
216
198
190
176
170
158
144
132
122
110
100
93
86
79
76
70
63
58
54.5
52.5
47.5
43
39.5
36.6
34
31.6
29.4
28
26.4
25
23.6
OHMS
400
500
500
500
450
400
400
300
200
200
200
200
200
150
125
125
125
100
75
75
75
75
75
75
75
75
100
110
120
130
140
150
160
170
190
210
230
280
350
400
500
620
720
760
760
800
1000
1150
1250
1500
1500
1650
1750
1750
1850
1850
VOLTS
0.85
0.80
0.54
0.49
0.44
0.39
0.25
0.19
0.10
0.15
0.15
0.20
0.20
0.22
0.22
0.25
0.25
0.25
0.25
0.25
0.30
0.35
0.40
0.40
0.40
0.45
0.55
0.55
0.60
0.60
0.60
0.60
0.65
0.65
0.70
0.80
0.90
1.00
1.20
1.35
1.50
1.60
1.80
2.00
2.20
2.30
2.50
2.50
2.50
2.50
3.00
3.00
3.00
4.00
5.00
5.00
SMBG(J)533–5388B, e3
NOTE 1:
Devices listed above with B suffix have ±5% tolerance, A suffix designates ±10% tolerance, C suffix designates ±2%
tolerance, and D designates ±1% tolerance.
NOTE 2:
Zener voltage (Vz) is measured at T
L
= 25
o
C (+8, -2
o
C). Voltage measurement to be performed 40 ±10 milliseconds
after application of dc current.
NOTE 3:
The zener impedance is derived from 1 kHz ac voltage resulting from an ac current modulation having an rms value
equal to 10% of the dc zener current (I
ZT
or I
ZK
) superimposed on I
ZT
or I
ZK
. See Micro Note 202 for zener impedance
variation with different operating currents.
NOTE 4:
The maximum current (I
ZM
) shown is for a ±5% tolerance devices. The I
ZM
for other tolerances can be calculated using
the formula: I
ZM
= P/V
ZM
where V
ZM
is the V
Z
at the high end of the voltage tolerance specified and P is the rated power
for the method of mounting.
NOTE 5:
The surge current (I
ZSM
) is specified as the maximum peak of a non-recurrent half-sine wave of 8.3 ms duration.
NOTE 6:
Voltage regulation (V
Z
) is the difference between the voltage measured at 10% and 50% of I
ZM
.
Copyright
©
2007
6-21-2007 REV E
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 2
Wireless Connectivity
京公网安备 11010802033920号
EEWORLD
