1260 POWER INDUCTORS
High Reliability Power Inductors
MS590PNB
■
High current, low DCR shielded power inductors
■
High temperature materials allow operation in ambient
temperatures up to 165°C.
■
Tin-lead (Sn-Pb) terminations for the best possible board
adhesion
Core material
Ferrite
Terminations
Tin-lead (63/37) over tin over nickel over phos bronze.
Weight:
2.8 g – 3.3 g
Ambient temperature
–55°C to +105°C with
Irms
current, +105°C
to +155°C with derated current
Storage temperature
Component: –55C to +155°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat
Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)
1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging
500/13″ reel; Plastic
tape: 24 mm wide, 0.35 mm thick, 16 mm pocket spacing,
6.6 mm pocket depth
DCR
3
(mOhms)
Part number
1
(µH)
typ
max
MS590PNB102NSZ
1.0 ±30%
5.8
6.5
MS590PNB152NSZ
1.5 ±30%
8.8
9.8
MS590PNB222NSZ
2.2 ±30% 11.5 12.8
MS590PNB332NSZ
3.3 ±30% 12.6 14.0
MS590PNB472MSZ
4.7 ±20% 13.9 15.5
MS590PNB562MSZ
5.6 ±20% 14.9 16.6
MS590PNB682MSZ
6.8 ±20% 16.6 18.5
MS590PNB822MSZ
8.2 ±20% 20.2 22.5
MS590PNB103MSZ 10 ±20%
21.5 23.9
MS590PNB123MSZ 12 ±20%
24.5 27.3
MS590PNB153MSZ 15 ±20%
30.7 34.2
MS590PNB183MSZ 18 ±20%
35.4 39.4
MS590PNB223MSZ 22 ±20%
36.6 40.7
MS590PNB273MSZ 27 ±20%
51.3 57.0
MS590PNB333MSZ 33 ±20%
54.9 61.0
MS590PNB393MSZ 39 ±20%
58.0 64.5
MS590PNB473MSZ 47 ±20%
80.1 89.0
MS590PNB563MSZ 56 ±20%
82.5 91.7
MS590PNB683MSZ 68 ±20%
94.5 105.0
MS590PNB823MSZ 82 ±20%
131.6 146.3
MS590PNB104MSZ 100 ±20% 141.8 157.6
MS590PNB124KSZ 120 ±10% 193.3 214.8
MS590PNB154KSZ 150 ±10% 215.4 239.4
MS590PNB184KSZ 180 ±10% 254.2 282.5
MS590PNB224KSZ 220 ±10% 314.1 349.0
MS590PNB274KSZ 270 ±10% 368.8 409.8
MS590PNB334KSZ 330 ±10% 481.3 534.8
MS590PNB394KSZ 390 ±10% 517.5 575.0
MS590PNB474KSZ 470 ±10% 721.2 801.4
MS590PNB564KSZ 560 ±10% 773.1 859.0
MS590PNB684KSZ 680 ±10% 867.6 964.0
MS590PNB824KSZ 820 ±10% 1158 1287
MS590PNB105KSZ 1000 ±10% 1273 1415
Inductance
2
®
SRF
4
(MHz)
min typ
70 100
56
80.0
39
55.0
29
42.0
27
38.0
21
30.0
19.0 27.0
18.0 26.0
15.0 22.0
14.0 20.0
12.6 18.0
11.2 16.0
10.5 15.0
9.0 13.0
8.7 12.4
8.4 12.0
8.0 11.6
7.3 10.5
7.0 10.0
6.0
8.6
5.5
7.8
4.8
6.8
4.5
6.4
4.3
6.1
3.9
5.5
3.0
4.3
2.8
4.0
2.5
3.6
2.1
3.0
2.0
2.8
1.8
2.6
1.7
2.5
1.6
2.4
Isat
(A)
5
Irms
(A)
6
10% 20% 30% 20°C 40°C
drop drop drop rise rise
19.12 21.18 22.76 6.00 8.00
14.44 16.40 17.64 5.30 7.60
12.32 14.00 15.08 5.20 7.30
10.88 12.22 13.12 5.00 7.00
9.92 11.10 12.00 4.50 7.00
8.54 9.60 10.38 4.00 6.40
7.80 8.80 9.44 3.80 5.90
6.44 7.38 7.98 3.40 4.80
6.00 6.92 7.48 3.00 4.00
5.68 6.56 7.08 2.80 3.70
5.34 6.04 6.54 2.60 3.50
4.82 5.54 6.00 2.50 3.30
4.42 5.04 5.44 2.30 3.10
3.78 4.32 4.68 2.10 2.90
3.50 4.00 4.34 2.00 2.70
3.32 3.80 4.14 1.90 2.60
2.84 3.26 3.54 1.85 2.50
2.64 3.04 3.28 1.75 2.40
2.46 2.82 3.04 1.70 2.30
2.24 2.54 2.74 1.60 2.20
2.06 2.34 2.54 1.50 2.10
1.84 2.08 2.28 1.38 1.85
1.64 1.90 2.06 1.20 1.66
1.46 1.70 1.84 1.14 1.58
1.30 1.48 1.60 1.00 1.42
1.18 1.38 1.48 0.90 1.45
1.04 1.20 1.30 0.84 1.16
1.00 1.16 1.28 0.78 1.08
0.906 1.00 1.10 0.70 0.96
0.872 0.980 1.02 0.64 0.88
0.782 0.886 0.956 0.58 0.80
0.692 0.784 0.854 0.53 0.73
0.588 0.672 0.726 0.48 0.68
1. When ordering, please specify
testing
code:
MS590PNB824KSZ
Testing: Z
= COTS
H
= Group A screening per Coilcraft
CP-SA-10001
N
= Group A screening per Coilcraft
CP-SA-10004
2. Inductance tested at 100 kHz, 0.1 Vrms,
0 Adc using an Agilent/HP 4263B LCR
meter or equivalent.
3. DCR measured on a micro-ohmmeter and a
Coilcraft CCF858 test fixture.
4. SRF measured using an Agilent/HP 8753D
network analyzer.
5. DC current at which the inductance drops
the specified amount from its value without
current.
6. Current that causes the specified tempera-
ture rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount
Components” before soldering.
Document MS599-1 Revised 06/12/13
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
Fax 847-639-1508
Email cps@coilcraft.com
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.
© Coilcraft, Inc. 2013
京公网安备 11010802033920号
EEWORLD
