ACTP-1629
COAXIAL TUNNEL DIODE DETECTORS
Frequency Range (min)
Sensitivity (min)
Flatness vs. Frequency (max)
Typical TSS
Typical VSWR
Nominal Video Capacitance
0.1 – 2
900
0.35
-51
2.3:1
75
GHz
mV/mW
±dB
dBm
Ratio
pF
NOTES:
Maximum input power: +14dBm (3dB guardband for +17dBm possible burnout)
Sensitivity is measured into an open circuit load (>10k ohm).
VSWR is measured at or below -20dBm input power level.
Video capacitance is used for RF bypass. This value can be changed if required for video response time. Contact the factory for more information.
ENVIRONMENTAL SPECIFICATIONS:
MIL-E-5400, MIL-STD-202, MIL-E-16400
Operating Temp: -55°C to +100°C
Storage Temp: -65°C to +100°C
Humidity: MIL-STD-202F, M103, Cond B
Shock: MIL-STD-202F, M213, Cond B
Altitude: MIL-STD-202F, M105, Cond B
Vibration : MIL-STD-202F, M204, Cond B
Thermal Shock: MIL-STD-202F, M107, Cond A
Temperature Cycle: MIL-STD-202F, M105C, Cond D
SCREENING:
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65°C to +100°C, 10 cycles
OPTIONAL HIGH-REL SCREENING (Ref MIL-PRF-38534):
Stabilization Bake per MIL-STD-883, Method 1008
Temperature Cycle per MIL-STD-883, Method 1010
Constant Acceleration per MIL-STD-883, Method 2001
Burn-in per MIL-STD-883, Method 1015
Leak Test per MIL-STD-883, Method 1014
External Visual per MIL-STD-883, Method 2009
STANDARD CASE STYLE C3
(Optional Case Styles – C8, C15, C62)
PART NUMBER ORDERING INFORMATION:
•
•
•
•
Add desired polarity suffix: “N” for Negative, “P” for Positive (Ex: ACSP-1629N)
Add desired case style suffix: “C3” (Ex: ACSP-1629NC3)
Add “R” suffix: Reverse Connector Configuration (Ex: ACSP-1629NC3R) (SMA Female Input/SMA Male Output)
Add “-RC” suffix: RoHS-compliant (Ex: ACSP-1629NZC3-RC)
0109
611 Industrial Way West, Eatontown, NJ 07724
tel: 732-460-0212 fax: 732-460-0214
sales@advanced-control.com
www.advanced-control.com