KA Series 4 & 5 Row
4 and 5 Row Printed Circuit
Board Connectors
48, 68, 80, 96, 100, 108, 120, 125, 128, 136, 140,
160, 184, 196, 200, 208, 228, 230, 240, 264, 300,
320, 330, 352, 390, 392, and 490 Contacts
• 4 row and 5 row printed circuit board connectors
• 0.100 x 0.100 [2.54 x 2.54] grid spacing
• Straight dip, right angle solder, crimp, solder cup,
and Wire Wrap
®
terminations
• 0.024 [0.60] diameter pins/sockets rated at 4 Amps
• Average insertion force of 1 ounce per contact
• Contacts removable from wiring side (front release,
rear removable)
• Alignment and keying provided by the end guides -
36 combinations (user changeable)
Plating Reference
Male Pins:
Contact Resistance
Extraction Force
Contact Life Cycles
Breakdown Voltage
Between Contacts
Dielectric
Withstanding Voltage
Insulation Resistance
Temperature Rating
Insulator Material
Contact
Material
Plating
Beryllium copper wires and brass body
Gold over nickel
< 5 milliohms
0.3 to 2.0 oz. per contact
100,000
> 1400V RMS
General Specifications
Number Contacts
Contact Diameter
Current Rating
48, 68, 80, 96, 100, 108, 120, 125, 128, 136, 140,
160, 184, 196, 200, 208, 228, 230, 240, 264, 300,
320, 330, 352, 390, 392 and 490
0.024 [0.60]
4 Amps at 30° C Rise
T = 10µin gold (min) over nickel
TH = 50µin gold (min) over nickel
TAH = 50µin gold (min) over nickel on mating
surface, gold flash over nickel on termination
Female Sockets:
> 1050V RMS
> 10 Megohms at 500 VDC
6
Number of
Contacts
48
68
80
96
100
A
1.840
[46.74]
2.340
[59.44]
2.640
[67.06]
3.040
[77.22]
3.140
[79.76]
3.340
[84.84]
3.640
[92.46]
B
1.500
[38.10]
2.000
[50.80]
2.300
[58.42]
2.700
[68.58]
2.80
[71.12]
3.000
[76.20]
3.300
[83.82]
Number of
Contacts
128
136
160
184
196
228
A
3.840
[97.54]
4.040
[102.62]
4.640
[117.86]
5.240
[133.10]
5.540
[140.72]
6.340
[161.04]
B
3.500
[88.90]
3.700
[93.98]
4.300
[109.22]
4.900
[124.46]
5.200
[132.08]
6.000
[152.40]
-55° C to 125° C
Diallyl-phthalate
Guides Hardware
Material
Plating
Nickel plated
Brass and passivated stainless steel
108
120
Connector Dimensions
48 to 228 Contacts
Plugs
Receptacles
NOTES:
1) Mated length 0.678 [17.22].
2) Tolerance ± 0.020 [0.50].
3) Wire Wrap is a trademark of
Gardner Denver.
Dimensions are in inches [mm]
www.hypertronics.com
3 / 69
KA Series 4 & 5 Row
Terminal Styles
Ref.
B
1/8"
PC Board
•
For
Plugs
Female/Male
Receptacles
Female/Male
C
•
For
1/16"
PC Board
D
DD*
FD*
Front Removable Straight Dip Solder Contacts
H2
•
Accepts
22 and
26 AWG Wire
•
Stripped Back
0.146 [3.70]
Ref.
NOTES:
1) Crimp contacts will be shipped unmounted. When inserting contacts
in the blocks/insulators be sure that the rear of the contact body is
aligned with the flats in the insulator.
2) All tails are ± 0.015 [0.40] long.
* Consult factory for availability.
Terminal Style
Right angle dip solder (1/8" board)
Right angle dip solder (1/16" board)
Straight dip solder
Double crimp (for insulation)
B
C
D/DD/FD
H2
1
Dimensions are in inches [mm]
www.hypertronics.com
3 / 73
MEMS sensors
京公网安备 11010802033920号
EEWORLD
