D
-
S
ub
PROFESSIONAL / INDUSTRIAL QUALITY
REMOVABLE CONTACT
STANDARD DENSITY D-SUBMINIATURE
Positronic Industries
connectpositronic.com
Size 20 Signal and
Thermocouple Contacts,
Crimp Removable
Two Performance Levels
For Best Cost /
Performance Ratio
IEC Publication 60807-3
Performance Level Two - Professional
Performance Level One - Industrial
Di
rec
tive
2002
/9
ORD SERIES TECHNICAL CHARACTERISTICS
MATERIALS AND FINISHES:
Insulators:
Glass filled DAP per ASTM-D-5948, SDG-F,
UL 94V-0, green color.
Contacts:
Precision machined copper alloy.
Contact Plating:
Industrial performance - gold flash over nick-
el plate. Other finishes available upon
request.
Shells:
Steel or brass with tin plate; zinc plate with
chromate seal, stainless steel passivated.
Other materials and finishes available
upon request.
Mounting Spacers:
Nylon; copper alloy or steel with zinc
plate and chromate seal or tin plate;
phosphor bronze with tin plate; stainless
steel, passivated.
Vibration Lock Systems:
Slide lock and lock tabs, steel with nickel
plate.
Jackscrew Systems:
Brass or steel with zinc plate and chro-
mate seal or clear zinc plate or tin plate;
stainless steel, passivated.
Hoods:
Composite and plastic, UL 94V-0; brass or
steel with zinc plate and chromate seal;
aluminum or aluminum with electroless
nickel plate; die cast zinc.
Non-magnetic versions are available, contact Technical Sales.
Contact Terminations:
Shells:
Polarization:
Locking Systems:
Mechanical Operations:
Closed barrel crimp, wire sizes 18 AWG
[1.0mm
2
] through 24 AWG [0.25mm
2
].
Tin-plated male shells may be dimpled for
EMI/ESD ground paths.
Trapezoidally shaped shells and polarized
jackscrews.
Jackscrews and vibration locking systems.
500 operations minimum per IEC 60512-5
for “ ‘Robi-D’ Open Entry” design.
1000 operations minimum per IEC 60512-5
for PosiBand closed entry female contact.
ELECTRICAL CHARACTERISTICS:
Contact Current Rating:
7.5 amperes nominal for open entry
14 amperes for closed entry. Tested per U.L.
1977, six contacts energized.
See tempera-
ture rise curve on page 2 for details.
0.008 ohms maximum for open entry
0.005 ohms maximum for closed entry
1000 V r.m.s.
5 G ohms.
0.039 inch [1.0mm].
300 V r.m.s.
Initial Contact Resistance:
Proof Voltage:
Insulator Resistance:
Clearance and Creepage
Distance [minimum]:
Working Voltage:
MECHANICAL CHARACTERISTICS:
Removable Contacts:
Insert contact to rear face of insulator and
release from rear face of insulator. Size 20
contact, male - 0.040 inch [1.02mm] mat-
ing diameter. Female contacts - rugged
“Robi-D” open entry design or PosiBand
closed entry design, see page 1 for
details.
9 lbs. [40 N].
CLIMACTIC CHARACTERISTICS:
Temperature Range:
Damp Heat, Steady State:
-55°C to +125°C.
10 days.
THERMOCOUPLE CONTACTS:
Size 20 crimp contacts are available. See page 41 for details.
PCB mount contacts are available in HDC series, see page 27 for details.
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Contact Retention
In Insulator:
5/
Compliant
EC
For RoHS options
see page 42.
38
ORD SERIES
ORD series connectors are low cost quality connectors with
closed barrel crimp removable contacts. ORD series connec-
tors are recommended for use in sheltered, mildly corrosive
environments having a wide range of temperatures with normal
ventilation where high performance is required.
ORD series connectors utilize precision-machined contacts
to provide durability. Female contacts feature the low cost, high
performance Robi-D open entry design, meeting the perform-
ance requirements of IEC 60807-3, Performance Level Two.
Female PosiBand closed entry contacts are optional and meet
IEC 807-3, Performance Level One.
Six standard contact variants are offered in arrangements of
9, 15, 25, 29, 37, and 50 contacts. ORD series connectors are
mateable and compatible with all D-Subminiature connectors
conforming to MIL-DTL-24308, IEC 60807-2, and IEC 60807-3.
A wide assortment of cable support hoods and locking sys-
tems is available from stock.
RoHS
IT
R
O
NIC
INDU
S
TR
POS
IES
r
•
pe
•
EU
Positronic Industries
connectpositronic.com
PROFESSIONAL / INDUSTRIAL QUALITY
REMOVABLE CONTACT
STANDARD DENSITY D-SUBMINIATURE
CONTACT VARIANTS
FACE VIEW OF MALE OR REAR VIEW OF FEMALE
D
-
S
ub
1
2
3
4
5
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
10 11 12 13
6
7
8
9
9
10 11 12 13 14 15
14 15 16 17 18 19 20 21 22
23 24 25
ORD 9
1
2
3
4
5
6
7
8
9
10
1
11 12 13 14 15 16 17 18 19
20
21 22 23 24 25 26 27 28 29
2
3
4
5
6
7
ORD 15
1
8
9
10 11 12 13 14 15 16 17 18 19
2
3
4
5
6
ORD 25
7
8
9
10 11 12 13 14 15 16 17
18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
34
35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
ORD 29
ORD 37
ORD 50
STANDARD SHELL ASSEMBLY
B
B1
M
K
G
0.050±0.010
[1.27±0.25]
10° Typ.
E
D1
D
0.036±0.008
[0.91±0.20]
H
C
A
0.375 [9.53]
Max.
Ø0.120±0.005 [Ø3.05±0.13]
Mounting hole, two places
ORD SERIES
39
OPTIONAL SHELL ASSEMBLY (0, 02)
OPTIONAL SHELL ASSEMBLY
WITH UNIVERSAL FLOAT MOUNTS (F)
0.120±0.010 [3.08±0.25]
Ø0.120±0.005 [Ø3.05±0.13]
Mounting hole, two places
for stainless steel shell (0 option)
Ø0.154 [3.91] Mounting hole,
two places (02 option)
0.032 [0.81]
Total diametral float
Ø0.086+0.005 Ø2.18+0.13
-0.00
-0.000
Mounting hole, two places
[
]
CONNECTOR
VARIANT SIZES
ORD 9 M
ORD 9 F
ORD 9 S
ORD 15 M
ORD 15 F
ORD 15 S
ORD 25 M
ORD 25 F
ORD 25 S
ORD 29 M
ORD 29 F
ORD 29 S
ORD 37 M
ORD 37 F
ORD 37 S
ORD 50 M
ORD 50 F
ORD 50 S
A
±0.015
[0.38]
1.213
[30.81]
1.213
[30.81]
1.541
[39.14]
1.541
[39.14]
2.088
[53.04]
2.088
[53.04]
1.770
[44.96]
1.770
[44.96]
2.729
[69.32]
2.729
[69.32]
2.635
[66.93]
2.635
[66.93]
B
±0.005
[0.13]
B1
±0.005
[0.13]
0.666
[16.92]
C
±0.005
[0.13]
0.984
[24.99]
0.984
[24.99]
1.312
[33.32]
1.312
[33.32]
1.852
[47.04]
1.852
[47.04]
1.534
[38.96]
1.534
[38.96]
2.500
[63.50]
2.500
[63.50]
2.406
[61.11]
2.406
[61.11]
D
±0.005
[0.13]
D1
±0.005
[0.13]
0.329
[8.36]
E
±0.015
[0.38]
0.494
[12.55]
0.494
[12.55]
0.494
[12.55]
0.494
[12.55]
0.494
[12.55]
0.494
[12.55]
0.605
[15.37]
0.605
[15.37]
0.494
[12.55]
0.494
[12.55]
0.605
[15.37]
0.605
[15.37]
G
±0.010
[0.25]
0.759
[19.28]
0.759
[19.28]
1.083
[27.51]
1.083
[27.51]
1.625
[41.28]
1.625
[41.28]
1.322
[33.58]
1.322
[33.58]
2.272
[57.71]
2.272
[57.71]
2.178
[55.32]
2.178
[55.32]
H
±0.010
[0.25]
0.422
[10.72]
0.422
[10.72]
0.422
[10.72]
0.422
[10.72]
0.422
[10.72]
0.422
[10.72]
0.539
[13.69]
0.539
[13.69]
0.422
[10.72]
0.422
[10.72]
0.534
[13.56]
0.534
[13.56]
K
±0.005
[0.13]
0.233
[5.92]
0.243
[6.17]
0.233
[5.92]
0.243
[6.17]
0.230
[5.84]
0.243
[6.17]
0.217
[5.51]
0.237
[6.02]
0.230
[5.84]
0.243
[6.17]
0.230
[5.84]
0.243
[6.17]
M
±0.010
[0.25]
0.422
[10.72]
0.429
[10.90]
0.422
[10.72]
0.429
[10.90]
0.426
[10.82]
0.429
[10.90]
0.426
[10.82]
0.429
[10.90]
0.426
[10.82]
0.429
[10.90]
0.426
[10.82]
0.429
[10.90]
0.643
[16.33]
0.994
[25.25]
0.971
[24.66]
1.534
[38.96]
1.511
[38.38]
1.274
[32.36]
1.251
[31.78]
2.182
[55.42]
2.159
[54.84]
2.079
[52.81]
2.064
[52.43]
0.311
[7.90]
0.329
[8.36]
0.311
[7.90]
0.329
[8.36]
0.311
[7.90]
0.450
[11.43]
0.431
[10.95]
0.329
[8.36]
0.311
[7.90]
0.441
[11.20]
0.423
[10.74]
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
D
-
S
ub
PROFESSIONAL / INDUSTRIAL QUALITY
REMOVABLE CONTACT
STANDARD DENSITY D-SUBMINIATURE
REMOVABLE CRIMP CONTACTS
CODE 1
CONTACTS MAY BE SUPPLIED WITH CONNECTOR OR ORDERED SEPARATELY.
CLOSED CRIMP BARREL
Positronic Industries
connectpositronic.com
Note: Connectors can be kitted with
all applicable crimp contacts,
contact Technical Sales for
connector part number.
FEMALE CONTACT
“CLOSED ENTRY” DESIGN
0.066
[1.68]
0.538 [13.67]
MALE CONTACT
0.550 [13.97]
0.066
[1.68]
ØA
0.170+0.015-0.020
[4.32+0.38-0.51]
Ø0.040 [1.02]
0.170+0.015-0.020
[4.32+0.38-0.51]
ØA
FEMALE
PART NUMBER
WIRE SIZE
AWG/[mm
2
]
20 / 22 / 24
[0.5/0.3/0.25]
26 / 28 / 30
[0.12/0.08/0.05]
ØA
0.045
[1.14]
0.027
[0.69]
MALE
PART NUMBER
WIRE SIZE
AWG/[mm
2
]
20 / 22 / 24
[0.5/0.3/0.25]
26 / 28 / 30
[0.12/0.08/0.05]
ØA
0.045
[1.14]
FC6020D2
FC6026D2
MC6020D
MC6026D
PLATING:
STANDARD FINISH:
Gold flash over nickel plate.
OPTIONAL FINISHES:
0.000030 [0.76] gold over nickel by adding “-14” suffix onto part number. Example: FC6120D2-14
0.000050 inch [1.27] gold over nickel by adding “-15” suffix onto part number. Example: MC6026D-15
REMOVABLE CRIMP CONTACTS
CODE 1
CONTACTS MAY BE SUPPLIED WITH CONNECTOR OR ORDERED SEPARATELY.
CLOSED CRIMP BARREL
FEMALE CONTACT
“ROBI-D OPEN ENTRY” DESIGN
Ø0.045
[1.14]
0.538 [13.67]
Note: Connectors can be kitted with
all applicable crimp contacts,
contact Technical Sales for
connector part number.
FEMALE
Ø0.066
[1.68]
0.170+0.015-0.020
[4.32+0.38-0.51]
PART NUMBER
WIRE SIZE
AWG/[mm
2
]
20 / 22 / 24
[0.5/0.3/0.25]
FC6120D
PLATING:
STANDARD FINISH:
Gold flash over nickel plate.
OPTIONAL FINISHES:
0.000030 [0.76] gold over nickel by adding “-14” suffix onto part number. Example: FC6120D-14
0.000050 inch [1.27] gold over nickel by adding “-15” suffix onto part number. Example: FC6120D-15
For information regarding crimp tool and crimping tool techniques, see Application Tools section, pages 78-83.
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
40
ORD SERIES
0.027
[0.69]
Positronic Industries
connectpositronic.com
PROFESSIONAL / INDUSTRIAL QUALITY
REMOVABLE CONTACT
STANDARD DENSITY D-SUBMINIATURE
D
-
S
ub
The crimp area of this contact is not
protected when fully seated in the
connector molding. These contacts
require shrink tubing after installation.
Not suitable for fully loaded connector.
REMOVABLE CRIMP CONTACTS
18 AWG CRIMP CONTACTS
18 AWG [1.0mm2]
Note: Connectors can be kitted with
all applicable crimp contacts,
contact Technical Sales for
connector part number.
CONTACTS MAY BE SUPPLIED WITH CONNECTOR OR ORDERED SEPARATELY.
*FEMALE CONTACT
“ROBI-D OPEN ENTRY” DESIGN
MALE CONTACT
FC6118D
MC6018D
* FEMALE POSIBAND CLOSED ENTRY CONTACTS ARE AVAILABLE, SEE PAGE 36 FOR DETAILS.
PLATING:
STANDARD FINISH:
Gold flash over nickel plate.
OPTIONAL FINISHES:
0.000030 [0.76] gold over nickel by adding “-14” suffix onto part number. Example: FC6118D-14
0.000050 inch [1.27] gold over nickel by adding “-15” suffix onto part number. Example: MC6018D-15
ORD SERIES
†
REMOVABLE THERMOCOUPLE CONTACTS
CONTACTS MAY BE SUPPLIED WITH CONNECTOR OR ORDERED SEPARATELY.
Note: Connectors can be kitted with
all applicable crimp contacts,
contact Technical Sales for
connector part number.
FEMALE CONTACT
“CLOSED ENTRY” DESIGN
0.538 [13.67]
ØA
* Color Code
MALE CONTACT
0.550 [13.97]
* Color Code
ØA
ØB
0.170+0.015-0.020
[4.32+0.38-0.51]
Ø0.040 [1.02]
0.170+0.015-0.020
[4.32+0.38-0.51]
ØB
TYPE
MATERIAL
CHROMEL (+)
FEMALE
PART NUMBER
MALE
PART NUMBER
COLOR
CODE
WHITE
WIRE SIZE
AWG [mm
2
]
ØA
0.066 [1.68]
0.048 [1.23]
0.066 [1.68]
0.048 [1.23]
0.066 [1.68]
0.048 [1.23]
0.066 [1.68]
0.048 [1.23]
0.066 [1.68]
0.048 [1.23]
0.066 [1.68]
0.048 [1.23]
ØB
0.045 [1.14]
0.027 [0.69]
0.045 [1.14]
0.027 [0.69]
0.045 [1.14]
0.027 [0.69]
0.045 [1.14]
0.027 [0.69]
0.045 [1.14]
0.027 [0.69]
0.045 [1.14]
0.027 [0.69]
Chromel and
®
Alumel are regis-
tered trademarks of
Hoskins
Manufacturing
Company.
®
FC6020D2CH
††
FC6026D2CH
FC6020D2AL
††
FC6026D2AL
FC6020D2CU
††
FC6026D2CU
FC6020D2CO
††
MC6020DCH
†
MC6026DCH
MC6020DAL
†
MC6026DAL
MC6020DCU
†
MC6026DCU
MC6020DCO
†
20 / 22 / 24 [0.5 / 0.3 / 0.25]
26 / 28 / 30 [0.12 / 0.08 / 0.05]
20 / 22 / 24 [0.5 / 0.3 / 0.25]
26 / 28 / 30 [0.12 / 0.08 / 0.05]
20 / 22 / 24 [0.5 / 0.3 / 0.25]
26 / 28 / 30 [0.12 / 0.08 / 0.05]
20 / 22 / 24 [0.5 / 0.3 / 0.25]
26 / 28 / 30 [0.12 / 0.08 / 0.05]
20 / 22 / 24 [0.5 / 0.3 / 0.25]
26 / 28 / 30 [0.12 / 0.08 / 0.05]
20 / 22 / 24 [0.5 / 0.3 / 0.25]
26 / 28 / 30 [0.12 / 0.08 / 0.05]
K
ALUMEL (-)
For more information on
the availability of Type J
thermocouple contacts,
and information about
thermocouple contacts
with PCB solder termi-
nation, please contact
Technical Sales.
GREEN
COPPER (+)
T
CONSTANTAN (-)
RED
FC6026D2CO
FC6020D2CH
††
FC6026D2CH
FC6020D2CO
††
FC6026D2CO
MC6026DCO
MC6020DCH
†
MC6026DCH
MC6020DCO
†
MC6026DCO
††
YELLOW
CHROMEL (+)
E
CONSTANTAN (-)
WHITE
YELLOW
Dimensionally equivalent to M39029/64-369
Dimensionally equivalent to M39029/63-368
For information regarding crimp tool and crimping tool techniques, see Application Tools section, pages 78-83.
41
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
D
-
S
ub
PROFESSIONAL / INDUSTRIAL QUALITY
REMOVABLE CONTACT
STANDARD DENSITY D-SUBMINIATURE
Positronic Industries
connectpositronic.com
ORDERING INFORMATION - CODE NUMBERING SYSTEM
Specify Complete Connector By Selecting An Option From Step 1 Through 8
STEP
EXAMPLE
1
ORD
2
9
3
M
4
0
5
0
6
0
7
0
8
Z
9
/AA
10
-14
STEP 1 - BASIC SERIES
ORD series
STEP 10 - SPECIAL OPTIONS
-14 - 0.000030 [0.76µ] gold over
nickel.
-15 - 0.000050 [1.27µ] gold over
nickel.
CONTACT TECHNICAL SALES
FOR SPECIAL OPTIONS
R
STEP 2 - CONNECTOR VARIANTS
9, 15, 25, 29, 37, 50
STEP 3 - CONNECTOR GENDER
M - Male
F - Female - Professional Level
open entry contacts
S - Female - Industrial Level
PosiBand closed entry contacts
O
NIC
INDU
S
EC
RoHS
Compliant
Di
•
STEP 9 - ENVIRONMENTAL
COMPLIANCE
OPTIONS
/AA - Compliant per EU Directive
2002/95/EC (RoHS)
IT
TR
POS
IES
STEP 4 - CONTACT TERMINATION TYPE
0
1
- Ordered Without Contacts.
- Crimp, 20 AWG-24 AWG [0.5mm
2
-0.25mm
2
].
rec
tive
2002
/9
NOTE:
If compliance to environmental
legislation is not required, this step will not
be used. Example: ORD9M0000Z
5/
*
1
STEP 5 - MOUNTING STYLE
0
02
F
S2
S5
-
-
-
-
-
Mounting Hole, 0.120 [3.05] Ø.
Mounting Hole, 0.154 [3.91] Ø.
Float Mounts, Universal.
Swaged Spacer, 4-40 Threads, 0.125 [3.18] Length.
Swaged Locknut, 4-40 Threads.
STEP 8 - Shell Options
0
C
*
3
S
X
Z
-
-
-
-
-
Zinc plated, with chromate seal.
Cadmium plated with chromate seal.
Stainless steel, passivated.
Tin plated.
Tin plated and dimpled (male connectors only).
*
1
STEP 6 - HOODS
0
J
L
Y
-
-
-
-
None.
Hood, Top Opening, Plastic.
Hood, Side Opening, Plastic.
Hood, Top Opening, Plastic with Rotating Male Jackscrews.
Available in size 50 only.
Hood, Top Opening, Plastic with Rotating Male and Female
Polarized Jackscrews. Available in size 50 only.
Hood, Top or Side Opening, Robust Extended Height,
Composite and Plastic with Rotating Male Jackscrews. Available
in size 9, 15, 25, 37, and 50 only.
Hood, Top Opening, Metal. Available in size 15, 25, 37, and 50
only.
Hood, EMI/RFI, Metal. Available in size 9, 15, 25, 37, and 50
only.
Lightweight Aluminum Hood, nickel finish.
Lightweight Aluminum Hood, no finish.
Hood, Top or Side Opening, Plastic. Available in size 9, 15, and
25 only.
*
1
STEP 7 - LOCKING AND POLARIZING SYSTEMS
0-
*
2
V3 -
*
2
V5 -
*
2
VL -
T-
T2 -
T6 -
E-
E2 -
E3 -
E6 -
None.
Lock Tab, connector front panel mounted.
Lock Tab, connector rear panel mounted.
Lock Lever, used with Hoods Only.
Fixed Female Jackscrews.
Fixed Female Jackscrews.
Fixed Male and Female Polarized Jackscrews.
Rotating Male Jackscrews.
Rotating Male Screw Locks.
Rotating Male with internal hex for 3/32 hex drives
Rotating Male and Female Polarized Jackscrews.
Y6 -
Z-
H-
G-
*
4
AN -
*
4
AC -
W-
NOTE:
Once you have made a connector selection, contact
Technical Sales if you would like to receive a drawing in DXF, PDF
format or a 3-dimensional IGES, STEP or SOLIDWORKS file.
,
*
1
For additional information on accessories listed in steps
5, 6 and 7, see Accessory Catalog.
*
2
VL, V3 and V5 locking systems are not available for connector variants 37
and 50. Jackscrews are highly recommended to minimize damage to con-
tacts on variants with high mating forces.
3
*
For stainless steel dimpled male versions contact Technical Sales.
*
4
AN and AC hood are not available for connector variant 29. Consult
Technical Sales for availability.
For crimping information and crimp tools,
see Application Tools section, pages 78-83.
SK Drawing
3-dimensional model
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
42
ORD SERIES
•
pe
U
rE
Power technology
京公网安备 11010802033920号
EEWORLD
