The JDSU SN Series fiberoptic switch is GR-1221 qualified and designed for use
in central office network applications. This reliable, miniature optical component
is available as a 1x1 (on/off), 1x2, and 2x2 switch.
Collimated lenses and a moving mirror minimize insertion loss and improve the
repeatability and stability of the switch parameters. The switch itself is directly
mounted on printed circuit boards (PCBs), and is equipped with status contacts
to provide an electrical readout of the switch position. Latching operation ensures
that the switch remains in position following power loss.
On request, JDSU also provides customized modular assemblies that incorporate
taps, wavelength division multiplexers (WDMs), splitters, and other components.
Compliance
• Telcordia GR-1221-CORE and
GR-1073-CORE
NORTH AMERICA
:
800 498-JDSU (5378)
WORLDWIDE
:
+800 5378-JDSU
WEBSITE
:
www.jdsu.com
SN SERIES FIBEROPTIC SWITCH
2
SN Series Dimensions Diagram
1.904 [48.36]
.714 [18.14]
.349 [8.86]
.230 [5.84]
.100 [2.54]
.730 [18.54]
1.855 [47.12]
.125 [3.18]
.135 [3.43]
.105 [2.67]
.405 [10.29]
.505 [12.83]
.29 [7.4]
.50 [12.7]
Pin #12
.000 [.00]
Pin #1
.300 [7.62]
.400 [10.16]
Ø .040 [1.02]
11 PL
Pin #6
(Specifications in inches [mm] unless otherwise noted.)
.167 [4.24]
1.625 [41.28]
.000 [.00]
.100 [2.54]
.200 [5.08]
.400 [10.16]
.500 [12.70]
PCB
NOTES: RECOMMENDED BOARD THICKNESS .063" [1.59]
SWITCH MOUNTING HOLE PATTERN
Specifications
Parameter
Wavelength range
Insertion loss
1
1x1, 1x2
2x2
Return loss
2
Polarization dependent loss
2
Repeatability
Crosstalk
Optical input power (continuous wave)
Switching time
Cycle rate
Power supply
3
Dimensions (W x H x D)
Weight
Operating temperature
Storage temperature
Humidity (non-condensing)
Qualification
Specification
1290 to 1330 and/or 1525 to 1610 nm
0.8 dB
1.0 dB
55 dB
0.1 dB
±0.05 dB
-60 dB
300 mW
9 ms
10 Hz
5 V DC/40 mA ±10%
48.4 x 8.7 x 18.1 mm
14 g
0 to 65 °C, or -5 to 70 °C short term
4
-40 to 85 °C
<85% RH, or 90% RH short term
4
GR-1221-CORE, GR-1073-CORE
1. Insertion loss is specified for the 1290 to 1330 nm and 1520 to 1570 nm wavelength ranges, all polarization states, and does not include connectors. Add 0.3 dB maximum
over operating temperature range. Add 0.1 dB maximum for extended wavelength operation up to 1610 nm.
2. Excluding connectors.
3. A 5 V DC 40 mA pulse of 20 ms duration is recommended.
4. The switch can be operated over the short term from -5 to 70 °C for 96 consecutive hours or less and a total of 15 days or less over a one year period.
SN SERIES FIBEROPTIC SWITCH
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: SN22+10750FA
SN
Code
11
12
22
+1
Configuration
1x1
1x2 (2x1)
2x2
Code
2
7
Fiber Type
9/125/250 µm
1
9/125/900 µm
Code
1
3
5
D
W
Wavelength
1525
to
1610
nm
1290
to
1330
nm
1525
to
1575
nm
1290
to
1330
nm
and
1525
to
1575
nm
1290
to
1330
nm
and 1525
to
1610
nm
Code
NC
FA
FP
LC
SC
SP
SU
MU
Connector Type
No
connector
FC/APC
FC/HPC
LC/PC
SC/HPC
ST/HPC
SC/APC
MU
Code
0
Control Type
Direct
control
Code
0
5
Fiber Length
1.0 m
1.5 m
1. The 250 µm fiber option is only available with the “no connector” option.
The network coprocessor NETCP module of C6678 has two external Gigabit network ports, but the network port driver example provided by PDK only supports a single network port and needs to be modified. ...
[i=s]This post was last edited by damiaa on 2022-9-15 12:36[/i]【Home treasure】 esp32s2 freertos communication between tasks xMessageBuffer
The message buffer allows discrete messages of variable lengt...
When developing with Cortex-M processors, the most feared error for many engineers is Hard Fault during debugging. There are many reasons that may cause Fault exceptions. In addition to the program it...
Dear embedded system veterans, I have only played with cortex M-level microcontrollers such as STM32 and TM4. I don't know Linux and have never touched cortex A-level processors. Recently, I want to p...
[i=s]This post was last edited by Micsig on 2019-12-17 14:12[/i]Vertical resolution concept
The first step in measuring analog signals with a digital oscilloscope is to use an ADC (analog-to-digital c...
DSP and ARM Processors
京公网安备 11010802033920号
EEWORLD
