-
Murata Manufacturing Co., Ltd. (hereinafter referred to as "Murata") has developed the "SCH16T-K01", a compact 6-axis inertial sensor that can detect attitude angle and own position with ultra-high-l...[Details]
-
The National Energy Administration held a press conference to release the energy situation and renewable energy grid-connected operation status in the first three quarters, interpret the "Guidi...[Details]
-
sfr is used to assign a special function register of a microcontroller to a variable, so that the variable can refer to the register in subsequent programs. The usage of sbit is similar to that of ...[Details]
-
At the beginning of 2024,
the robot
industry has received a lot of billion-level investments. After experiencing the first year of AI and humanoid robots in 2023, VCs hope that 2024 will be...[Details]
-
#include "sys.h" #include "led.h" #include "delay.h" #include "string.h" #include "USART3_TIM2.h" char *str_open = "open"; char *str_close = "close"; int main(void) { delay_init(); Led_Heat(...[Details]
-
1 Introduction
With the improvement of people's quality of life, lamps are no longer just basic indoor lighting tools, but also a kind of practical art for architectural decoration. When t...[Details]
-
The current probe uses the Hall effect and open-loop measurement principle to convert the measured current (AC, DC or irregular waveform current) into a measurement module of the output current or vo...[Details]
-
When a two-port network is replaced by an equivalent circuit, the equivalent circuit must have the same external characteristics as the original network. For a two-port network without independent ...[Details]
-
Electromagnetic interference modes of power supply system One of the reasons for the complexity of power supply interference is that it involves many variable factors. First, power supply interferen...[Details]
-
3 Other current sharing methods
Active methods such as the external controller method, the average method and the master-slave method all require a current sharing bus. The existence of the current...[Details]
-
The following introduces the circuit design of the single-chip microcomputer minimum system . The single-chip microcomputer minimum system is mainly composed of power supply, reset, oscillation cir...[Details]
-
1. Selection of Zener diodes Zener diodes are generally used as reference voltage sources in voltage-stabilized power supplies or as protection diodes in overvoltage protection circuits. The select...[Details]
-
#include #include #define uint unsigned int #define uchar unsigned char sbit SH_595=P2^1; sbit DATA_595=P2^0; sbit ST_CP_595=P2^2; //74HC595(12)-ST_CP rising edge-shift register data enters the clo...[Details]
-
On September 3, the Second Global IC Entrepreneurs Conference and IC China 2019 opened in Shanghai. Shanghai Vice Mayor Xu Kunlin attended and delivered a keynote speech. Xu Kunlin said that the in...[Details]
-
A multimeter is a common measuring tool used by electricians. It can be used to measure parameters such as voltage, current, and resistance. A soft starter is a device used to start a motor. It can...[Details]