RA = 10 μ" [0.25 μm] gold with matte tin tails (RIA E1 & C1 apply)
RB = 30 μ" [0.76 μm] gold with matte tin tails (RIA E1 & C1 apply)
Contact Quantity Code:
(see table)
TS-0815-E
Sheet 2 of 2
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M is a trademark of 3M Company.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase.
3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
I directly recorded every bit of code I learned from this code: TI official routine: PC sends characters to the microcontroller, and then the microcontroller sends it back to the PC. It is such a simp...
In fact, there are many advantages to learning Linux .
The Linux kernel can be said to be the epitome of the entire open source software community. In the past few decades, a large number of world-cla...
I used STM32CubeMX to generate the serial port 1 interrupt initialization code for STM32L151C8T6.
An exclamation mark appears on serial port 1
Could you please tell me where the problem is and how to ...
Set the ADAPT bit in the SCIGCR1 register to 1 to enable the baud rate adaptation function. During the frame header reception, the slave node can measure the baud rate using the synchronization field....