IT
POS
Di
rec
tive
2002
/9
TECHNICAL CHARACTERISTICS
MATERIALS AND FINISHES:
Insulator:
Contacts:
Contact Plating:
Signal:
Power:
Shells:
Gold flash over nickel plate. Other finish-
es available upon request.
Gold flash over nickel. Other finishes
available upon request.
Steel or brass with tin plate; zinc plate
with chromate seal; stainless steel passi-
vated. Other materials and finishes avail-
able upon request.
Mounting Spacers
and Brackets:
Nylon; copper alloy or steel with zinc
plate and chromate seal or tin plate;
phosphor bronze with tin plate; stainless
steel, passivated.
Cross Bar:
Push-On Fasteners:
Nylon, UL 94V-0, black color.
Beryllium copper, tin plated.
Power Contacts:
Glass filled polyester per MIL-M-24519
UL 94, blue color, and composite.
Precision machined copper alloy.
Vibration Lock Systems:
Jackscrew Systems:
Brass or steel with zinc plate and
chromate seal or clear zinc plate or tin
plate; stainless steel, passivated.
Lock tabs, steel with nickel plate.
Non-magnetic versions are available, contact Technical Sales.
MECHANICAL CHARACTERISTICS:
Signal Contacts:
Size 20 contacts, male – 0.040 inch
[1.02mm] mating diameter. Female con-
tact – rugged open entry. PosiBand
closed entry female options are also
available.
Contact Retention
In Insulator:
Contact Terminations:
9 lbs. [40N]
Printed board mount with right angle
(90°) terminations supported by align-
ment bar. Termination diameter 0.028
inch [0.71mm].
Size 8 contact, male – 0.142 inch
[3.61mm] mating diameter.
43
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
5/
EC
•
CBDPB/CBDPC SERIES
PROFESSIONAL, INDUSTRIAL AND MILITARY QUALITY
THREE PERFORMANCE LEVELS FOR BEST COST/PERFORMANCE RATIO
Positronic Industries
connectpositronic.com
VERTICALLY STACKED STANDARD DENSITY PCB MOUNT
C
ombo-
D
D
-
S
ub
Size 20 Signal Contacts
Size 8 Power Contacts
U.L. Recognized
File #E49351
CSA Recognized
File #LR54219
Telecommunication
U.L. File #14095
The Combo-Dual Port connector series offers several
combinations of power and signal contacts within the same
connector assembly. Seventeen different combinations of
power and signal contact stacked assemblies are available
within four standard shell sizes. The connector assembly
can be partially populated with either signal or power con-
tacts installed in the connector bodies to customer selected
contact positions. The stacked connectors may be spaced
apart to two dimensional spacings.
On special order, the right angle (90°) printed board
mount
15 ampere
contacts may be replaced with size 8
power, shielded or high voltage contacts having crimp or
solder cup terminations. Signal contacts remain in dual
port configuration.
Mounting angle brackets can be ordered riveted to the
connector by specifying R2, R6, R7 and R8 options.
Locking systems are available utilizing 4-40 threaded
jackscrew systems, polarized or non-polarized, or with a
quick-release vibration lock system for rear panel mounted
connectors.
Combo-Dual Port series connectors comply with the
dimensional requirements of IEC 807-2 and DESC 85039.
R
O
NIC
INDU
S
RoHS
TR
IES
For RoHS options
see page 48.
•
pe
U
rE
continued on next page. . . .
C
ombo-
D
D
-
S
ub
PROFESSIONAL, INDUSTRIAL AND MILITARY QUALITY
THREE PERFORMANCE LEVELS FOR BEST COST/PERFORMANCE RATIO
VERTICALLY STACKED STANDARD DENSITY PCB MOUNT
Positronic Industries
connectpositronic.com
TECHNICAL CHARACTERISTICS,
continued
continued from previous page. . . .
MECHANICAL CHARACTERISTICS, continued:
Contact Retention
In Insulator:
Contact Terminations:
22 lbs. [98N]
Printed board mount with right angle (90°)
terminations of 0.078 inch [1.98mm]
diameter.
Male connector shells may be dimpled for
EMI/ESD ground paths.
Polarization:
Mounting Bracket
Riveted to Connector:
Trapezoidally shaped shells and polarized
jackscrews.
Riveted fasteners with 0.120 inch
[3.05mm] diameter clearance hole, with
4-40 threads or 4-40 threads with nylon
lock insert.
Mounting To
Printed Board:
Locking Systems:
Rapid installation push-on fasteners.
Jackscrews and vibration locking system
for either front or rear panel mounted con-
nectors.
Mechanical Operations:
500 operations minimum per IEC 512-5.
ELECTRICAL CHARACTERISTICS:
SIZE 20 CONTACTS
Contact Current Rating:
Initial Contact Resistance:
Proof Voltage:
Size 8 CONTACTS
POWER CONTACTS
Electrical characteristics for 0.078 inch diameter terminations,
see page 4.
CONNECTOR
Insulator Resistance:
Clearance and Creepage
Distance (minimum):
Working Voltage:
7.5 amperes nominal.
0.008 ohms maximum.
1000 V r.m.s.
Shells:
5 G ohms.
0.039 inch [1.0mm]
300 V r.m.s.
CLIMATIC CHARACTERISTICS:
Temperature Range:
Damp Heat, Steady State:
-55°C to +125°C.
10 days.
CONTACT VARIANTS
FACE VIEW OF MALE OR REAR VIEW OF FEMALE
SHELL SIZE 1
SHELL SIZE 2
*
1
2WK2
5W1
3W3
*
2
3WK3
7W2
11W1
SHELL SIZE 3
5W5
9W4
13W3
17W2
21W1
SHELL SIZE 4
8W8
13W6
17W5
21WA4
25W3
27W2
Notes:
*
1
2WK2 connectors have 1 male and 1 female contacts. Female connector
should be loaded with female contact in A2 position.
*
2
3WK3 male variant contains 2 male contacts and 1 female contact.
Female variant contains 2 female contacts and 1 male contact
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
44
CBDPB/CBDPC SERIES
CBDPB/CBDPC SERIES
45
PROFESSIONAL, INDUSTRIAL AND MILITARY QUALITY
THREE PERFORMANCE LEVELS FOR BEST COST/PERFORMANCE RATIO
Positronic Industries
connectpositronic.com
VERTICALLY STACKED STANDARD DENSITY PCB MOUNT
C
ombo-
D
D
-
S
ub
RIGHT ANGLE (90°) PRINTED BOARD MOUNT CONNECTOR
4 ROW CONNECTOR UNIT, 0.283 [7.19] CONTACT EXTENSION
See temperature rise curves on pages 1 and 2.
±0.008
0.036 [0.91]
0.220 [5.59] MAX.
4-40 UNC THDS.
TYP. 4
0.247 [6.27]
NOTE:
30 ampere 0.125
[3.18] Ø power con-
tacts may be ordered
at special request for
a limited number of
CBDP variants.
Contact technical
sales for details.
0.170 [4.32]
±0.003
0.028 Ø TYP.
[0.71]
±0.010
0.270 [6.86]
0.494 [12.55]
±0.003
0.078 Ø TYP.
[1.98]
0.283 [7.19] TYP.
0.112 [2.84] TYP.
0.112 [2.84] TYP.
0.150 [3.81] TYP.
0.745 [18.92]
±0.010
0.580 [14.73]
TYPICAL PART NUMBER:
CBDPB7W2MN8T2/7W2MN8T6X
CONNECTOR
VARIANT
CONNECTOR
DESIGNATION
CBDPB
CBDPC
A
1.213
[30.81]
1.541
[39.14]
2.088
[53.04]
2.729
[69.32]
B
0.984
[24.99]
1.312
[33.32]
1.852
[47.04]
2.500
[63.50]
C
0.750
[19.05]
0.900
[22.86]
D
1.244
[31.60]
1.394
[35.41]
E
0.256
[6.50]
0.406
[10.31]
SHELL SIZE 1
SHELL SIZE 2
SHELL SIZE 3
SHELL SIZE 4
Note:
Printed board power contacts (size 8) may be replaced
with a size 8 removable power, shielded, air or high
voltage contact having solder or crimp terminations.
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
C
ombo-
D
D
-
S
ub
PROFESSIONAL, INDUSTRIAL AND MILITARY QUALITY
THREE PERFORMANCE LEVELS FOR BEST COST/PERFORMANCE RATIO
VERTICALLY STACKED STANDARD DENSITY PCB MOUNT
Positronic Industries
connectpositronic.com
RIGHT ANGLE (90°) PRINTED BOARD CONTACT HOLE PATTERN
HOLE IDENTIFICATION SHOWN IS FOR FEMALE CONNECTOR OVER MALE CONNECTOR.
MOUNT CONNECTOR WITH MATING FACE POSITIONED TO FOLLOW DIRECTION OF ARROW.
0.262 [6.65]
4
A1
3
0.112 [2.84]
0.035 [0.89]
0.310
[7.87]
1
0.262 [6.65]
0.069 [1.75]
0.310
[7.87]
A1
A2
A3
A3
A2
A1
0.069 [1.75]
0.310
[7.87]
A1
A2
A2
A1
0.056 [1.42]
2
1
3
A1
4
2
0.135 [3.43]
0.492 [12.50]
0.013
[0.33]
0.162 [4.11]
0.218 [5.54]
0.492 [12.50]
0.270 [6.86]
0.656 [16.66]
2WK2/2WK2
2WK2/2WK2
5W1/5W1
5W1/5W1
0.108 [2.74]
0.035 [0.89]
0.310
[7.87]
A1
7
1
3W3/3W3
3W3/3W3
3WK3/3WK3
3WK3/3WK3
0.262 [6.65]
0.069 [1.75]
5
4
0.054 [1.37]
0.035 [0.89]
0.310
[7.87]
A1
3
5
2
1
3
A1
0.112 [2.84]
0.056 [1.42]
A2
0.112 [2.84]
0.056 [1.42]
0.310
[7.87]
1
1
6
10
0.268 [6.81]
3
2
1
2
5
A2
1
7
A1
6
10
2
3
4
5
0.013
[0.33]
0.108 [2.74]
0.270 [6.86]
0.656 [16.66]
0.013
[0.33]
0.162 [4.11]
0.216 [5.49]
0.656 [16.66]
0.034 [0.86]
0.570 [14.48]
0.926 [23.52]
7W2/7W2
7W2/7W2
0.108 [2.74]
0.162 [4.11]
0.035 [0.89]
0.310
[7.87]
A1
A2
A3
3
5
2
1
3
A3
A2
A1
11W1/11W1
11W1/11W1
0.108 [2.74]
0.112 [2.84]
0.056 [1.42]
A4
5W5/5W5
5W5/5W5
0.054 [1.37]
0.035 [0.89]
0.310
[7.87]
6
1
10
5
A2
A3
0.112 [2.84]
0.056 [1.42]
A1
1
2
5
5
A3
A2
10
A4
1
6
A1
0.013
[0.33]
0.306 [7.77]
0.570 [14.48]
0.926 [23.52]
0.013
[0.33]
0.306 [7.77]
0.570 [14.48]
0.926 [23.52]
9W4/9W4
9W4/9W4
0.055 [1.40]
0.035 [0.89]
0.310
[7.87]
A1
8
15
7
1
8
A1
13W3/13W3
13W3/13W3
0.112 [2.84]
0.056 [1.42]
A2
0.109 [2.77]
0.035 [0.89]
0.310
[7.87]
A1
11
1
0.112 [2.84]
0.056 [1.42]
10
20
1
7
15
A2
1
11
A1
10
20
0.013
[0.33]
0.109 [2.77]
0.544 [13.82]
0.926 [23.52]
0.013
[0.33]
0.163 [4.14]
0.218 [5.54]
0.926 [23.52]
17W2/17W2
17W2/17W2
21W1/21W1
21W1/21W1
SUGGESTED PRINTED BOARD HOLE SIZES:
Suggest 0.045 [1.14] Ø hole for signal contact termination positions.
Suggest 0.098 [2.49] Ø hole for 0.078 [1.98] Ø power contact termination positions.
Suggest 0.123 ±0.003 [3.12] Ø hole for mounting connector with push-on fasteners.
Mounting holes must move 0.020 [0.51] ±0.010 opposite direction
of arrow for use of unriveted mounting bracket with connectors.
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
46
CBDPB/CBDPC SERIES
0.310
[7.87]
A1
A2
A3
A4
A5
A6
A7
A8
0.310
[7.87]
A1
A2
A3
A4
A5
A6
1
5
7
0.600 [15.24]
0.900 [22.86]
1.250 [31.75]
0.013
[0.33]
0.092 [2.34]
0.265 [6.73]
1.250 [31.75]
8W8/8W8
8W8/8W8
13W6/13W6
13W6/13W6
0.343 [8.71]
0.035 [0.89]
0.310
[7.87]
A1
A2
A1
0.109 [2.77]
A4
A3
12
6
7
1
A2
0.112 [2.84]
0.056 [1.42]
A5
0.109 [2.77]
0.035 [0.89]
0.310
[7.87]
A1
0.055 [1.40]
A3
9
17
10
1
A2
0.112 [2.84]
0.056 [1.42]
A4
1
7
6
12
A3
A4
A5
A1
A2
1
10
9
17
A3
A4
0.013
[0.33]
0.618 [15.70]
0.893 [22.68]
1.250 [31.75]
0.013
[0.33]
0.618 [15.70]
0.893 [22.68]
1.250 [31.75]
17W5/17W5
17W5/17W5
21WA4/21WA4
21WA4/21WA4
0.109 [2.77]
0.035 [0.89]
0.310
[7.87]
A1
A2
A1
0.055 [1.40]
22
11
12
1
A2
0.112 [2.84]
0.056 [1.42]
A3
0.035 [0.89]
0.310
[7.87]
1
A1
0.055 [1.40]
13
25
14
0.112 [2.84]
0.056 [1.42]
A2
1
12
11
22
A3
1
A1
14
13
25
A2
0.013
[0.33]
0.618 [15.70]
0.893 [22.68]
1.250 [31.75]
0.013
[0.33]
0.109 [2.77]
0.893 [22.68]
1.250 [31.75]
25W3/25W3
25W3/25W3
27W2/27W2
27W2/27W2
SUGGESTED PRINTED BOARD HOLE SIZES:
Suggest 0.045 [1.14] Ø hole for signal contact termination positions.
Suggest 0.098 [2.49] Ø hole for 0.078 [1.98] Ø power contact termination positions.
Suggest 0.123 ±0.003 [3.12] Ø hole for mounting connector with push-on fasteners.
Mounting holes must move 0.020 [0.51] ±0.010 opposite direction
of arrow for use of unriveted mounting bracket with connectors.
47
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
4
7
5
1
A6
A5
A4
A3
A2
A1
A8
A7
A6
A5
A4
A3
A2
A1
CBDPB/CBDPC SERIES
PROFESSIONAL, INDUSTRIAL AND MILITARY QUALITY
THREE PERFORMANCE LEVELS FOR BEST COST/PERFORMANCE RATIO
Positronic Industries
connectpositronic.com
VERTICALLY STACKED STANDARD DENSITY PCB MOUNT
C
ombo-
D
D
-
S
ub
RIGHT ANGLE (90°) PRINTED BOARD CONTACT HOLE PATTERN
HOLE IDENTIFICATION SHOWN IS FOR FEMALE CONNECTOR OVER MALE CONNECTOR.
MOUNT CONNECTOR WITH MATING FACE POSITIONED TO FOLLOW DIRECTION OF ARROW.
0.109 [2.77]
0.250 [6.35]
0.150 [3.81]
0.262 [6.65]
0.069 [1.75]
0.707 [17.96]
0.035 [0.89]
0.652 [16.56]
0.112 [2.84]
0.056 [1.42]
4
Special Edition for Assessment Centres
京公网安备 11010802033920号
EEWORLD
