Elite
CS-37
Latching
Miniature Transfer DC-18GHz
The CS-37 Failsafe Switch is a long-life high performance transfer switch designed for use in
50 Ohms coaxial transmission lines operating over frequencies ranging from DC to 18 GHz.
The switch is designed for minimum size compatible with SMA connector spacing.
The failsafe switches on this page are provided with a spring operated actuator which is
particularly desirable in applications where the switch is connected
to one position (normally closed) most of the time and only
periodically switched to the alternate position. In this type of
application, holding power is required only when operating in the
Break before make
alternate position. Also, switching circuitry is simplified, since only
one DC circuit is required.
Voltage (VDC) 20
O
C 12 15 28
Current (mA)
Switching Time:
Connectors:
Weight:
15 msec max
SMA (f)
2.50 oz. max
MIL-STD-202 Method 213, Condition D (500G Non Operating)
MIL-STD-202 Method 214, Condition D (10G RMS Non Operating)
Moisture Seal Available
:
5
Million
Cycles
160 130 60
For Less demanding applications consider using the CCS-37
Commercial range.
Specifications
RF Contacts:
Actuator
Temperature Range:
-54
O
C to +85
O
C (Operating)
Shock:
Vibration:
Humidity:
T
RF Power Handling:
Typical Performance
3000
800
400
Sta
n
Power CW (Watts)
dar
dS
MA
15
Co
nne
c
tors
200
25
80
40
Return Loss
0.01
Frequency GHz
18.0
1.0
4.0
Frequency GHz
10
18
0.0
Specifications
DC-6 GHz 6-12 GHz 12-18 GHz
1.40:1
0.40 dB
60.0 dB
1.50:1
0.50 dB
60.0 dB
0.4
VSWR (max)
1.25:1
Insertion Loss (max) 0.20 dB
Isolation (min)
70.0 dB
IL dB
60
70
80
90
0.01
Frequency GHz
18.0
Specifications subject to change without notice.
www.rfswitches.com
email: switches@teledyne.com
Tel: 800 -284-7007
01/2004
74
Isolation dB
10
0.1
Elite
CS-37
Latching
Miniature Transfer DC-18GHz
TTL
Analog
H = 1.50 STD Model
H = 2.00 TTL Model
Indicators
Part Numbering System for CS-37 (Latching)
CS-37 S 6 C - T
Series
Connectors
Actuator Voltage
Connector
S: SMA Female
Actuator Voltage
6: 28Vdc Latching
7: 15Vdc Latching
8: 12Vdc Latching
Actuator Type
O: No Indicator Contacts
C: Indicator Contacts
D: Self Cutoff Only
E: Indicators and Self
Cutoff
Options
T: TTL Drivers with Diodes
R: Positive + Common
Options
Actuator Type
For other options contact Factory
Specifications subject to change without notice.
www.rfswitches.com
email: switches@teledyne.com
Tel: 800- 284-7007
75
01/2004