Problem: After GD32F303 SPI is powered on again, the CLK clock signal IO is not output, but the simulation is normal.My configuration is as follows: Use SPI0, IO remappingFigure 1 This is the normal t...
The DC power supply system is mainly responsible for supplying power to control equipment, protection equipment, etc. in the process of power production. Insulation degradation and DC bus grounding ar...
A new vivado project file was created. At the beginning, it only had uv_calculation and simulation file vtf_uv_calculation.
After simulation, there is no problem with the waveform.
Later, scaler_3to2 ...