The MCU source program is as follows: #include//51 MCU standard register declaration header file #include "bsp_GOG1.h" //This header file is used to map the GOG1 learning board hardware interface /*Ca...
20W RF amplifier debugging - heated discussion on having a boy or a girlDownload volume of coursewareHFSS antenna simulation design + processing + test examples still need to have materialsThe various...
[i=s]This post was last edited by cpsiot on 2022-7-23 12:58[/i]It is a bit of a waste to use RPI-400 as the HMI part. Today, I will test the AI performance. If it is OK, I can do the AI recognition pa...
Cause of the incident: I helped someone design an electronic product in my spare time. I was responsible for writing ARM code and producing schematics, and another engineer produced PCBs. Because the ...
Title of Work
Smart car based on ESP32 road sign recognition
Author: Wang Zhiyuan
1. Introduction
The smart car based on ESP32 road sign recognition is ESP32 as the master control, controlling the mov...
Questions about isolated communication:1. Is this isolated communication the same as level conversion?2. As shown in the figure, this is an IIC isolated communication circuit , which uses two high-vol...