REVISION AQ
DO NOT
SCALE FROM
THIS PRINT
.060 1.52 REF
02
((NO OF POS X .10 [2.5]) + .02 [0.5]
(SEE NOTE 12)
No OF POSITIONS
-02 THRU -50
SSW-1XX-22-XXX-X-XX-XX-X-XX
OPTION
-TR: TAPE & REEL
(AVAILABLE FOR POSITIONS -02
THRU -28, -VS OPTION ONLY
OPTION
-P: PICK AND PLACE (5 POS MIN)
(SEE FIG 5, SHT 3)
(USE LMP-02 FOR -D OPTION)
AQ
(USE PPP-12 FOR -S OPTION)
(OPTIONS N/A FOR -TV OR -TM)
-K: KAPTON PAD (3 POS MIN)
(SEE FIG 6, SHT 3)
-N: NOTCH (SEE FIG 7, SHT 4, POSITIONS 05, 07,
08, 10, 12, 13, 15, 17, 20, 25, 32, 36 ONLY)
(ONLY AVAILABLE IN -D ROW, -VS OPTION)
(USE NSW-XX-D-N-XX BODY, SEE TABLE 2)
POLARIZING OPTION
INDICATE POS (SEE FIG 4, SHT 2)
OPTION
-VS: VERTICAL SURFACE MOUNT (SEE FIG 1)
* -TV: TRIPLE VERTICAL MOUNT (SEE FIG 2)
* -TM: TRIPLE MIXED MOUNT (SEE FIG 3)
LEAD STYLE
-22 (USE C-17-02-X)
.095 2.41 REF
-T: MATTE TIN IN CONTACT AND TAIL
-G: GOLD, 20µ" Au / 50µ" Ni MIN ON CONTACT,
3µ" AU / 50µ" Ni MIN ON TAIL
-S: SELECTIVE, 30µ" Au / 50µ" Ni MIN ON CONTACT, MATTE TIN TAIL
-H: HEAVY GOLD 30µ" Au / 50µ" Ni MIN
ON CONTACT, 3µ" Au / 50µ" Ni MIN ON TAIL
-F: FLASH SELECTIVE, 3µ" Au / 50µ" Ni MIN ON CONTACT, MATTE TIN TAIL
-STL: SELECTIVE, 30µ" Au / 50µ" Ni MIN
ON CONTACT AREA, TIN /LEAD (90/10 +/-5%) TAIL
-SM: SELECTIVE, 30µ" Au / 50µ" Ni MIN ON CONTACT, MATTE TIN TAIL
-FM: FLASH SELECTIVE, 3µ" Au / 50µ" Ni MIN ON CONTACT,
MATTE TIN TAIL (-VS OPTION ONLY)
-L: LIGHT SELECTIVE, 10µ" Au / 50µ" Ni MIN
ON CONTACT AREA, MATTE TIN TAIL
PLATING SPECIFICATIONS
01
03
-S: SINGLE ROW
04 02
.195 4.95 REF
BODY SPECIFICATION
-S: SINGLE (USE SSW-XX-S, SEE FIG 1)
-D: DOUBLE (USE SSW-XX-D, SEE FIG 1)
-T: TRIPLE (USE SSW-XX-T, SEE FIG 2 & 3)
* = NOT ENGINEERING APPROVED
03 01
-D: DOUBLE ROW
-VS: VERTICAL SURFACE MOUNT
FIG 1
.190 4.83
.190 4.83
IN-PROCESS
DOUBLE ROW
C
IN-PROCESS
SINGLE ROW
C
L
90.0°
- 2°
.335 8.51 REF
C
+3°
C
L
R .025 [.64] (TYP)
C
C
90.0°
- 2°
+3°
R .025 [.64] (TYP)
.004 [.10]
.031 0.79 x .016 [.41] REF (TYP)
NOTES:
.31 7.87
(SEE NOTE 7)
.05 1.27
(SEE NOTE 9)
.004 [.10]
.203±.010 5.16±0.25
.05 1.27
(SEE NOTE 9)
-D: DOUBLE ROW
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
-S: SINGLE ROW
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
1. C REPRESENTS A CONTROL PLAN CRITICAL DIMENSION.
2. MAXIMUM CUT FLASH: .015[.38] WITH NO FLASH BELOW STANDOFFS OR IN CONTACT HOLES.
3. MAXIMUM ALLOWABLE BOW: .003[.08] INCH/INCH.
4. MAXIMUM ALLOWABLE SWAY: 2° EITHER DIRECTION.
5. MAXIMUM ALLOWABLE VARIATION BETWEEN ROWS: .010[.25].
6. "END WALLS" AFTER CUTTING SHOULD BE .020±.003 [.51±.08].
7. SHEAR TAILS TO DIMENSION SHOWN, BURR ALLOWED ON TOP SIDE (MOLD SIDE) TO .005 [.13] MAX
8. POSITIONS -05 THROUGH -50 TO BE PACKAGED INTUBES;
POSITIONS -02 THROUGH -04 TO BE LAYER PACKAGED.
9. MEASURED AT BEND RADIUS, NOT AT END OF PIN.
10. MINIMUM CONTACT PUSHOUT FORCE: 1.5 lbs.
11. POLARIZED CORNER OF PPP-12 IS TO BE ORIENTED TOWARD POSITION 1.
12. SINGLE ROW SURFACE MOUNT PARTS: FOR ODD POSITIONS, LOSE ONE POSITION PER CUT,
FOR EVEN POSITIONS, LOSE TWO POSITIONS PER CUT.
.XX: .01 [.3]
2
.XXX: .005 [.13]
.XXXX: .0020 [.051]
ANGLES
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
INSULATOR: SINGLE & DOUBLE ROW: LCP, UL 94 VO
TRIPLE ROW: PCT, UL 94 VO
COLOR: BLACK
TERMINAL: PHOSPHOR BRONZE
F:\DWG\MISC\MKTG\SSW-1XX-22-XXX-X-XX-XX-X-XX-MKT.SLDDRW
.100 [2.54] SURFACE MOUNT ASSEMBLY
SSW-1XX-22-XXX-X-XX-XX-X-XX
SHEET
1
OF
4
BY:
PLUMMER 01/20/97
REVISION AQ
"R"
"A"
PPP-12
.435 11.05
.195 4.95
REF
.138 3.51
.395 10.03
REF
"S"
"R"
.390 9.91
-S: SINGLE ROW
NOTE: "R" = USED MEASURED DIMENSION (REF)
"S" = {("R" / 2 - .069 [1.75]) .020 [.51]
-S: SINGLE ROW
(SEE NOTE 11)
FOR ODD: "A" = ("R"/2) -.2475 [6.287]
FOR EVEN: "A" = ("R"/2) -.1975 [5.027]
.020 [.51]
.020 [.51]
"R"
"S"
.390 9.91
"R"
"C"
.401 10.19
.280 7.11
REF
.225 5.72
REF
.256 [6.50]
-D: DOUBLE ROW
LMP-02
AQ
NOTE: "R" = USED MEASURED DIMENSION (REF)
"S" = {("R" / 2 - .128 [3.25]) .020 [.51]
-D: DOUBLE ROW
"C" = ("R"/2) -.1125 [2.858]
.020 [.51]
FIG 6
-K: KAPTON OPTION
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
FIG 5
-P: PICK & PLACE PAD OPTION
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.100 [2.54] SURFACE MOUNT ASSEMBLY
SSW-1XX-22-XXX-X-XX-XX-X-XX
SHEET
3
OF
4
F:\DWG\MISC\MKTG\SSW-1XX-22-XXX-X-XX-XX-X-XX-MKT.SLDDRW
BY:
PLUMMER 01/20/97
京公网安备 11010802033920号
EEWORLD
