DL02M510.00 Rev F—Page 1 of 3
End of Life Notification
August 17th, 2012
To: To whom it may concern:
Re: PCN for EOL of DL1L5*K delay line series.
All DL1L5*K parts, except those in current inventory , will no longer be available to order after
December 31, 2012. TFT is eliminating the manufacturing of its DL1L5*K delay line series. These
products are not planning to be replaced by a new part number.
The delay line families affected by this change include the products starting with the following
prefixes :
DL1L5*K Where the * = can be one of the following letters W , X, Y, Z, O or numbers 3, 4, 5.
All last time orders for these parts must be placed before the December 31, 2012. All parts ordered
must be delivered by March 31, 2013.
All products currently in stock will be available until the stock is gone . The MOQ of 100 pcs will be
enforced unless the remaining stock is less than 100 pcs.
If you have any further questions regarding this issue please contact your TFT Sales Person or
Customer Service Representative.
Best Regards,
Tim Goertzen
Tim Goertzen
Inside Sales Manager
Thin Film Technology Corporation
tel: (507)625-8445 x 25
fax: (507)625-3523
email: tgoertzen@thin-film.com
Thin Film Technology Corp. / 1980 Commerce Drive, North Mankato, MN 56003 (USA) / (507) 625-8445 /
www.thin-film.com
DL02M510.00 Rev F—Page 2 of 3
Product Family:
Part Number Series:
6-pin Through Hole Delay Line
DL1L5, 6-pin Series
Construction:
High Purity Alumina or Zirconium
Substrate
6-pin, through hole configuration
Available in RoHS and non-RoHS
versions. RoHS version utilizes
exemption 7a.
Features:
Single-ended (1 delay element)
Time delays of 0.1ns to 5.1ns
Tolerances as tight as ±0.05ns
50Ω impedance
High volume production suitable for
commercial and special applications
Description:
These 6-pin delay lines offer excellent performance and small size. The micro-strip construction is ideal for high frequency and tight
tolerance timing and deskew applications. The performance of these equally distributed capacitance delay lines is significantly better
than lumped element delay lines and the physical size is much smaller than delays obtained by using cable.
Product Dimensions, Schematic and Marking
(All dimensions are shown in inches)
:
Time Delay
0.1~0.5ns
0.6~2.6ns
2.7~3.5ns
3.6~5.1ns
“H” dimension
(Height Code)
0.300 max. (WK)
0.400 max. (XK)
0.550 max. (YK)
0.650 max. (ZK)
Schematic:
Product marking will be
composed of the following:
2-digit time delay code
representing full and tenths of
nanoseconds (ie 20=2.0ns)
TFT “Don’t Stop” logo
1-digit manufacturing code
Part is symmetrical (orientation can be
Pins 2 & 5 are Input/Output
All other pins should be connected to
ground
reversed)
DS-S Series Part Numbering:
Ex: DL1L5XK200S-C
Product
Designator
Number of
Elements
Impedance
Code
Package
Code
and Height
WK = 0.300”
XK = 0.400”
YK = 0.550”
ZK = 0.650”
Time Delay
Three numeric
characters
representing
nanoseconds x 100
(i.e. 200=2.00ns)
Delay Type
RoHS Indicator
DL
1L = 1
5 = 50Ω
S = Single
-C = RoHS
(leave blank for leaded)
Examples:
Part Number
DL1L5WK040S-C
DL1L5XK200S
DL1L5YK300S
DL1L5ZK510S-C
Product Height
0.300”
0.400”
0.550”
0.650”
Time Delay
0.4ns
2.0ns
3.0ns
5.1ns
Package Qty
100 pcs/bag
100 pcs/bag
100 pcs/bag
100 pcs/bag
RoHS
Yes*
No
No
Yes*
* RoHS version utilizes exemption 7a.
Thin Film Technology Corp. / 1980 Commerce Drive, North Mankato, MN 56003 (USA) / (507) 625-8445 /
www.thin-film.com
DL02M510.00 Rev F—Page 3 of 3
Electrical Specifications:
Product Designator -->
Product Height (inches)
Time Delay
Time delay increments
Time delay tolerance
Impedance
DC Resistance
Rise Time
Return Loss
Distortion
Rated Current
Temp. coef. of time
delay
Insulation Resistance
Isolation Resistance
(Sgn-Gnd)
Operating Temp. Range
Storage Temp. Range
Packaging
DL1L5WK
0.300
0.1 ~ 0.5ns
0.6 ~ 1.0ns
DL1L5XK
0.400
1.1 ~ 2.0ns
2.1 ~ 2.5ns
0.10ns steps
±0.05ns
50Ω ±10%
2.6ns
DL1L5YK
0.550
2.7 ~ 3.5ns
DL1L5ZK
0.650
3.6 ~ 5.1ns
0.5
Ω
max.
0.3ns max.
<-20dB 700MHz
1.0
Ω
max.
0.5ns max.
<-20dB
500MHz
2.0
Ω
max.
1.0ns max.
<-20dB 100MHz
3.0
Ω
max.
0.7ns max.
<-20dB
300MHz
±5%
100 mA
150 ppm/°C
100 Vdc (1 minute minimum)
100MΩ minimum @ 50 Vdc
-40°C ~ +85°C
-55°C ~ +125°C
100 pcs/bag
(bag contains tag board to protect leads from bending)
±10%
50 pcs/bag
(bag contains tag board to
protect leads from bending)
Thin Film Technology Corp. / 1980 Commerce Drive, North Mankato, MN 56003 (USA) / (507) 625-8445 /
www.thin-film.com
京公网安备 11010802033920号
EEWORLD
