OV7710
product brief
lead free
available in
a lead-free
package
high-performance, all-digital automotive solution
The OV7710 image sensor is a high performance
1/4 inch, single-chip VGA digital video camera
designed specifically for use in the automotive
industry. The OV7710 excels in low light conditions
and can operate within a wide temperature range
from -40˚C to +105˚C.
The OV7710 meets all automotive market
requirements in terms of performance, quality and
reliability.
The OV7710 incorporates a 656 x 492 image array capable of
operating at up to 30 frames per second (fps). The sensor
technology also utilizes algorithms to cancel Fixed Pattern Noise
(FPN), eliminate smearing, and drastically reduce blooming. The
OV7710 possesses all required camera functions including
exposure control, gain, white balance, windowing and more, which
are programmable through the Serial Camera Control Bus (SCCB)
interface. Other key features of the OV7710 image sensor are
its low power consumption, progressive scanning, external frame
sync (Genlock) capability and support for both 10-bit raw data or
8-bit YUV/RGB outputs.
The OV7710 has been submitted for full AEC-Q100 certification
for automotive applications.
applications
¬
automotive
airbag deployment
rear view
lane departure warning
blind spot view
night vision
adaptive cruise control
ordering info
¬ OV7710-Q00V
(color – QFP-48)
¬ OV7211-Q00V
(b&w with microlens
– QFP-48)
OV7710
product features
¬ OmniPixel2™ technology
¬ single chip 1/4", VGA sensor
¬ high sensitivity for low-light
operation
¬ master/slave compatible Serial
Camera Control Bus (SCCB)
control interface for register
programming
¬ low fixed pattern noise,
anti-blooming, zero smearing
¬ progressive scan
¬ horizontal mirroring and
vertical flipping
¬ white balance, exposure time,
gain control, etc.
¬ low power consumption
¬ external frame sync capability
(Genlock)
¬ SPI for overlay control
¬ supports two sets of dynamic
overlay control
¬ QFP parts submitted for
AEC-Q100 standard
product specifications
¬
array size:
656 x 492
¬
power supply
analog:
3.3VDC ± 10%
¬
minimum illumination (3000K):
0.04 Lux @ f/1.2
¬
S/N ratio:
50 dB
¬
dynamic range:
53 dB
¬
scan mode:
progressive
¬
electronic exposure:
up to 521:1
(for selected fps)
¬
pixel size:
6.0μm x 6.0μm
¬
fixed pattern noise:
< 0.03% of V
PEAK-TO-PEAK
¬
image area:
4.080 mm x 3.102 mm
¬
package dimensions:
14.22 mm x 14.22 mm
¬
temperature range:
-40/+105˚C in QFP
¬
power requirements
active:
140 mW typical
(30 fps VGA, YUV)
standby:
TBD
¬
output format
10-bit raw data
8-bit YUV/RGB
¬
max image transfer rate
VGA:
30 fps
QVGA:
60 fps
block diagram
1341 Orleans Drive
Sunnyvale, CA 94089
USA
Version 1.1 (auto) April, 2006
tel: + 1 408 542 3000
fax: + 1 408 542 3001
www.ovt.com
OmniVision reserves the right to make changes to their products or to discontinue
any product or service without further notice. ‘OmniVision’, the OmniVision logo,
‘VarioPixel’, and ‘OmniPixel’ are registered trademarks of OmniVision Technology. All
other trademarks are the property of their respective owners.