-
Timing is described by timing units. MCS-51 has four timing units, which are beat, status, machine cycle and instruction cycle. Next, we will explain them respectively. ·Rhythm and status: We d...[Details]
-
As a hot topic in the global capital market, autonomous driving has never left the center of the stage. Autonomous driving mainly includes three links: perception, decision-making and execution. Am...[Details]
-
0 Introduction
Turbidity is an important parameter for testing water quality in industrial water treatment (deionized water), and the water quality requirements for deionized water are relatively hi...[Details]
-
After the release of iPhone 11 this year, many netizens said that its design was not as stunning as they had imagined, and was somewhat inconsistent with Apple’s official slogan of “Innovation”. In a...[Details]
-
Switch
Power Supply
With safety and reliability as the first principle, high-performance high-power ATX
power supply
The power management monitoring chip is used in the design t...[Details]
-
In recent years,
the
robot
industry has developed rapidly.
As
a rising star in the
industrial robot
family,
collaborative robots
have repeatedly appeared in th...[Details]
-
Recently, I used STM8 to drive 1602 in a 4-wire mode. Garbled characters appeared when I powered on for the first time. Now I have found a solution online and made this summary. According to an ana...[Details]
-
In a single-chip microcomputer system, if there are many keys, such as electronic password locks and telephone keypads, there are generally at least 12 to 16 keys, and a matrix keyboard is usually us...[Details]
-
I have explored the SDIO of STM32 - SD card input/output module. Today, I only looked at the implementation of the POWER UP function. To write a driver for SDIO, you need to refer to the SD card proto...[Details]
-
Abstract: The DS3984 and DS3988 are multichannel cold cathode fluorescent lamp (CCFL) controllers. When optimizing a system design using the DS3984 and DS3988, the key parameter is the choice of trans...[Details]
-
1. Experimental purpose Through experiments, master the use of timers, especially the use of timer interrupts! 2. Experimental content 1 Use the timer0 of the Mega16 microcontroller to generate...[Details]
-
I have been engaged in microcontroller-related work for many years. When I first started learning serial communication, I had no teacher to guide me. I read several microcontroller textbooks on my own...[Details]
-
In the communication system, due to the presence of a large amount of noise and interference in the channel, there is a difference between the received code and the transmitted code after the chann...[Details]
-
Directional couplers are used to sample small amounts of input signal power for measurement. Port 1 is the input port; Port 1 is the input port. Port 2 is the output port; Port 3 is the coupling port...[Details]
-
【Abstract】
Power battery
The enthusiasm of manufacturers to go overseas has gradually risen since the middle of last year, and this year it has become an important part of seeking t...[Details]