-
Test system configuration
Configuration 1 is somewhat similar to a traditional test system setup. Model 2602 and Model 3706 instruments are used as control hosts. This is the slowest of all the...[Details]
-
Capacitive level gauge is a liquid level meter that measures the liquid level by the change of capacitance between two electrodes. Capacitive level gauge is widely used in chemical and other indust...[Details]
-
0 Introduction
With the continuous improvement and development of microcontroller technology, the application of single-chip microcomputers continues to deepen. Its application will inevitably ...[Details]
-
In electronic test and measurement, signal sources are often required to generate signals that are only present if they are provided externally. Signal sources can provide a "known good" sig...[Details]
-
1 Introduction The shunt active power filter (SAPF) is an important device for dynamically compensating harmonics and reactive power in three-phase power systems. Since the harmonic current compo...[Details]
-
Recently, MediaTek held a Dimensity flagship technology communication meeting. Chen Lifeng, product manager of the Wireless Communications Division, said that MediaTek launched the Dimensity 5G open ...[Details]
-
On August 17, Taiwan's Commercial Times reported that despite recent reports that TSMC, the leading foundry, may delay the construction of 3nm production capacity, TSMC has reiterated that the 3nm pr...[Details]
-
This system consists of editing part, display part, audio and video control part, etc.
The editing part is edited by an editing machine, and then the edited files are transmitted to the broadc...[Details]
-
Due to the size and cost constraints of the microcontroller, the M4K core does not support standard functions such as instruction cache (I-cache) or data cache (D-cache). This article focuses on on...[Details]
-
The digitally controlled DC current source designed in this paper can effectively reduce the output error caused by component aging, temperature drift, etc. The output current is adjustable from 20...[Details]
-
1 Introduction
The CAN-bus fieldbus was first proposed by Bosch of Germany. It is mainly used for data communication between the internal units of automobiles and the control center . Due to i...[Details]
-
China News Service, July 19th. Today, the BMW Group held the 2019 China Innovation Day in Beijing, and together with China Unicom, Tencent and NavInfo, it looked forward to a safer, cleaner, easier a...[Details]
-
Mouser Electronics Adds 31 New Manufacturer Partners in First Quarter of 2021 Focus on the Internet of Things field, and add 16 new embedded product companies May 25, 2021 – Mouser Electronics, an...[Details]
-
On the morning of July 10, the Deyi Energy lithium-ion power battery project located in the Qiaogang Park of Zongyang Economic Development Zone ushered in an important milestone. The first batch of 16...[Details]
-
Schematic diagram of current sharing using feedback control
Figure 1. Schematic diagram of current sharing using feedback control method
The figure is a schematic diagram of the above feedback...[Details]
Analog electronics
京公网安备 11010802033920号
EEWORLD