-
1 Introduction
Since the first digital signal processor (DSP) chip was introduced in the early 1980s, DSP has brought great opportunities for the development of digital signal proces...[Details]
-
Analysis of DC-LED driving technology route:
The LED driver circuit controls the power supply circuit for lighting the LED (light emitting diode). The forward voltage drop (VF) of the LED ch...[Details]
-
On June 6, RIKEN researchers from Japan's RIKEN showed that computer vision recognition capabilities in applications ranging from self-driving cars to virtual avatars can be significantly improved wi...[Details]
-
Castrol joins hands with Beijing Jianheng Certification Center and Zhonghong Science and Technology to launch immersion thermal management energy storage solution
(October 16, 2024, Beijing,...[Details]
-
1.SFIOR——Special Function IO Register
ADTS2 ADTS1 ADTS0 – ACME PUD PSR2 PSR10
Bit 3 - ACME: Analog Comparator Multiplexer Enable
When this bit is logic "1" and the ADC is in the of...[Details]
-
Abstract:
There are FCC certification requirements for 2.4GHz wireless products sold in the North American market. The certification tests are different depending on factors such as product cla...[Details]
-
An "intelligent detection control circuit" for the water boiler is designed and manufactured using the AT89C205l single-chip computer chip. It can monitor the water level in the water tank and the ...[Details]
-
Since the requirements for solid crystal are extremely high when encapsulating single-electrode chips, the use of conductive glue and conductive silver glue in the solid crystal process is also extrem...[Details]
-
A Bode plot with three poles and one zero will be used to analyze the gain and phase margin. Assuming a DC gain of 80dB, the first pole occurs at 100Hz. At this frequency, the slope of the gain cur...[Details]
-
On June 30, Huichuan Technology signed a strategic cooperation agreement with Nanxing Equipment Co., Ltd. (hereinafter referred to as "Nanxing Co., Ltd.").
Nanxing Co., Ltd. is...[Details]
-
As an electrician, it is common to tinker with and repair home appliances at home. When repairing, after all the wires are removed, especially when encountering second-hand repair failures, you often...[Details]
-
The R&S SMC100A signal generator delivers outstanding signal quality at an attractive price and covers the frequency range from 9 kHz to 1.1 GHz or 3.2 GHz. The output power is greater than 17 dBm. T...[Details]
-
The reporter learned from the website of the Ministry of Industry and Information Technology that on June 1, the Ministry of Industry and Information Technology issued the "Guidelines for the Use of ...[Details]
-
1. Design goals As the concept of energy saving becomes more and more popular, LED, a new luminous material for solid-state lighting, has made great progress. In Europe, they have specially formulat...[Details]
-
Set the multimeter to R×100 or R×1, connect one end of the diode with the red test lead and the other end with the black test lead, check the position where the multimeter stops, write down the resis...[Details]