AZ986
40 AMP 280-ISO
AUTOMOTIVE
RELAY
FEATURES
•
•
•
•
•
•
•
•
40 Amp contact rating
Coils to 24VDC
High operating temperature (125°C)
SPST (1 Form A), SPDT (1 Form C)
Available with shrouded weatherproof cover
Coil suppression available
ISO/TS 16949, ISO9001, ISO 14000
Tested in accordance with SAE J2544
GENERAL DATA
SPST (1 Form A)
SPDT (1 Form C)
Resistive load:
Max. switched power: 560 W (SPST)
560 W (N.O.)
420 W (N.C.)
Max. switched current: 40 A (SPST)
40 A (N.O.)
30 A (N.C.)
Max. switched voltage: 100 VDC
*
Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
CONTACTS
Arrangement
Ratings
Life Expectancy
Mechanical
Electrical
Operate Time (max.)
Release Time (max.)
Minimum operations
1 x 10
7
1 x 10
5
at 40 A 14 VDC Res.
7 ms at nominal coil voltage
4 ms at nominal coil voltage
Dielectric Strength
500 Vrms coil to contact
(at sea level for 1 min.)
500 Vrms contact to contact
Insulation Resistance
Dropout
Ambient Temperature
Operating
Storage
Vibration
600 megohms min. at 500 VDC, 20°C
50% RH
Greater than 10% of nominal coil voltage
-55°C (-67°F) to 125°C (257°F)
-55°C (-67°F) to 155°C (311°F)
1.27mm DA 10-40 Hz
5 g 40-70 Hz
0.5mm DA 70-100 Hz
10 g 100-500 Hz
200 m/s
2
P.B.T. polyester
Tinned copper alloy
0.110 Quick Connect
Note: Allow suitable slack on leads when wiring, and do
not subject the terminals to excessive force.
Material
Resistance
Silver tin oxide
< 100 milliohms initially
(6 V, 1 A voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
0.58 W
3.7 W at 20°C (68°F)
52°C (94°F) at nominal coil voltage
Max. 180°C (356°F)
Weight
Shock
Enclosure
Terminals
22 grams (37 grams shrouded version)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
1/17/07W
AZ986
RELAY ORDERING DATA
COIL SPECIFICATIONS
Nominal Coil
VDC
6
12
24
Must Operate
VDC
3.6
7.2
14.4
Max. Continuous
VDC
10
20.2
39.3
Coil Resistance
± 10%
27
109
436
RELAY ORDERING DATA
AZ986-1C-12DC2R1
Blank - Standard no diode, no resistor
R1 - 180 Ohm, ½ w resistor in parallel with 6 V coil
680 Ohm, ½ w resistor in parallel with 12 V coil
2700 Ohm ½ w resistor in parallel with 24 V coil
R2 - 220 Ohm, ½ w resistor in parallel with 6 V coil
820 Ohm, ½ w resistor in parallel with 12 V coil
3200 Ohm ½ w resistor in parallel with 24 V coil
D1 - 1A7 diode in parallel with coil, anode
on #86 terminal
D2 - 1A7 diode in parallel with coil, cathode
on #86 terminal
D3 - 1A4 diode in parallel with coil, anode
on #86 terminal
D4 - 1A4 diode in parallel with coil, cathode
on #86 terminal
C1 - Plastic dust cover unsealed
C2 - Plastic dust cover sealed
C3 - Plastic dust cover, shrouded, steel mounting
bracket, unsealed
C4 - Plastic dust cover, shrouded, steel mounting
bracket, sealed
24D - 24 volt coil
12D - 12 volt coil
6D - 6 volt coil
1A - SPNO Single pole normally open
1C - SPDT Single pole double throw
Basic series designation - AZ986
1/17/07W
京公网安备 11010802033920号
EEWORLD
