AM-151/AMC-151
Cascadable Amplifier
10 to 500MHz
Features
•
NOISE FIGURE: 5 dB (TYP.)
•
HIGH THIRD ORDER IP: +38 dBM (TYP.)
•
P1dB: +21 dBm (TYP.)
Rev. V5
Product Image
Description
The AM-151 amplifier uses a coupler feedback design with high
intercept and compression points. The use of coupler feedback
minimized noise figure and DC current in a high intercept
amplifier. This amplifier is packaged a TO-8 package. Due to
the internal power dissipation, the thermal rise is minimized.
The ground plane on the PC board should be configured to
remove heat from under the package. AM-151 is ideally suited
for use where a high intercept high reliability amplifier is
required.
Ordering Information
Part Number
AM-151-PIN
*
AMC-151- SMA**
Absolute Maximum Ratings
Parameter
Package
TO-8-1
SMA Connectorized
Maximum Input Power
DC Voltage
Continuous Input Power
Operating Temperature
Storage Temperature
+20 dBm
+15.75 V
+18 dBm
-55º to +85ºC
-65º to +125ºC
Absolute Maximum
*Mounting kit part number AU00071 required for PCB application
**SMA Connectorized part is not RoHs compliant.
Electrical Specifications: Z
0
= 50Ω, V
CC
= +15 V
DC**
Parameter
Gain
Frequency Response
Gain Variation with
Temperature
1 dB Compression
Noise Figure (max)
Reverse Transmission
VSWR
Output IP
2
Output IP
3
V bias
I bias
Power Dissiapation
V bias = +15 Vdc
@ +15 V Bias
Two-tone inputs up to +10 dBm
Two-tone inputs up to +10 dBm
Output Power
Test Conditions
@ +25
o
C
Frequency
50 MHz
5-500 MHz
5-500 MHz
5-500 MHz
10-500 MHz
5-500 MHz
5-500 MHz
5-500 MHz
5-500 MHz
5-500 MHz
Units
MHz
dB
dB
dBm
dBm
dB
dB
Ratio
dBm
dBm
dBm
mA
mW
Min.
11.5
Typ.
12.0
Max.
12.5
±1.0
±0.8
+19
+20
7.0
-16.0
-13.0
2.0:1
+48
+34
+14.5
+15.0
85
1275
+15.5
100
***Heat Sinking: Operation at case temperature above +95
o
C is not recommended. Heat sinking adequate to dissipate 1.3 W must be provided in use.
1
ADVANCED:
Data Sheets contain information regarding a product M/A-COM Technology Solutions
•
North America
Tel: 800.366.2266 •
Europe
Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
•
India
Tel: +91.80.4155721
•
China
Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY:
Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
AM-151/AMC-151
Cascadable Amplifier
10 to 500MHz
Typical Performance Curves at +25°C
Gain
Rev. V5
Outline Drawing: TO-8-1
*
DC IN
RF IN
RF OUT
.150
TYP.
(3.8)
.300
(7.6) TYP.
GND
4X Ø .018+/-.005
(0.46+/-0.13)
.220
MIN
(5.6)
.220
(5.6) MAX
.450
(11.4)
Ø .50
(12.7+0.5)
WEIGHT (APPROX) 0.10 OUNCES
2.8 GRAMS
Outline Drawing: SMA Connectorized
*
1.344
(34.14)
.562
(14.28)
DC IN
.457
(11.61)
0.72
(17.07)
1.344
(34.14)
2X CONNECTOR
.672
(17.1)
2X
.12
112-40 UNC-2B
.46
20
Ø
1.000
(25.4)
.750+/-.020
(19.05)+/-0.5
.375+/-.020
(9.53+/-0.51)
WEIGHT (APPROX) 1.62 OUNCES
46 GRAMS
∗
Dimensions in ( ) are in mm.
Unless otherwise noted: .XXX = + .010” (.XX = + 0.25)
.XX = + 0.02 (.X = + 0.5)
2
ADVANCED:
Data Sheets contain information regarding a product M/A-COM Technology Solutions
•
North America
Tel: 800.366.2266 •
Europe
Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
•
India
Tel: +91.80.4155721
•
China
Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY:
Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
京公网安备 11010802033920号
EEWORLD
