Process Sealed Subminiature Antistatic Toggles
Series B
Distinctive Characteristics
Subminiature size saves space on PC boards.
Specifically developed for logic-level applications.
Antistatic superstructure, consisting of the carbon impregnated
bushing and the support bracket, prevents static discharge
to the contacts. Static electricity from an operator’s touch
travels from actuator through the bushing and bracket to
the PC board.
Locking lever mechanism offered as a toggle option.
Optional threaded, 6mm diameter bushing for
panel seal mounting meets IP65 of IEC60529
specifications (similar to NEMA 4 and 13).
Totally sealed body construction prevents
contact contamination and allows time-
and money-saving soldering and cleaning.
Epoxy sealed terminals lock out flux and
other contaminants.
Award-winning STC contact mechanism with
benefits unavailable in conventional mechanisms:
smoother, positive detent actuation, increased contact
stability and unparalleled logic-level reliability. (Additional
STC details in Terms & Acronyms; see Supplement section.)
.100” x .100” (2.54mm x 2.54mm) terminal spacing
conforms to standard PC board grid spacing.
Illuminated toggles available and shown in the Illuminated
Other section.
Actual Size
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Process Sealed Subminiature Antistatic Toggles
Series B
General Specifications
Electrical Capacity (Resistive Load)
Logic Level:
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation of operating range in Supplement section.
Other Ratings
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
Mechanical Life:
Electrical Life:
Nominal Operating Force:
Contact Timing:
Angle of Throw:
50 milliohms maximum
500 megohms minimum @ 500V DC
500V AC minimum for 1 minute minimum
100,000 operations minimum for On-None-On & On-Off-On
50,000 operations minimum for other circuits
50,000 operations minimum for locking lever models
50,000 operations minimum
Toggles A, A1, E & K with Long Paddle: 1.47N (momentary); 1.18N (maintained)
Toggles J & H & K with Short Paddle: 2.72N (momentary); 1.84N (maintained)
Toggle L: 0.59N
Nonshorting (break-before-make)
26°
Materials & Finishes
Toggle:
Bushing:
Gasket:
Case Housing:
Support Bracket:
Movable Contact:
Stationary Contacts:
Terminals:
Nickel plated brass
Carbon blended polyamide; nickel plated zinc alloy for locking levers & threaded bushing
Nitrile butadiene rubber
Glass fiber reinforced polyamide
Tin plated phosphor bronze
Phosphor bronze with gold plating
Copper alloy with gold plating
Copper alloy with gold plating
Environmental Data
Operating Temperature Range:
Humidity:
Vibration:
Shock:
–30°C through +85°C (–22°F through +185°F)
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 2 hours
50G (490m/s
2
) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Installation
Mounting Torque:
.30 ~ .45Nm (2.65 ~ 3.98 lb
•
in) for A1 actuator with threaded bushing only
PCB Processing
Soldering:
Cleaning:
Wave Soldering Recommended: See Profile A in Supplement section.
Manual Soldering: See Profile A in Supplement section.
Automated cleaning. See Cleaning specifications in Supplement section.
Standards & Certifications
Flammability Standards:
UL Recognition
or CSA Certification:
UL94V-0 available
The B Series toggles have not been tested for UL recognition or CSA certification.
These switches are designed for use in a low-voltage, low-current, logic-level circuit.
When used as intended in a logic-level circuit, the results do not produce hazardous energy.
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Process Sealed Subminiature Antistatic Toggles
TYPICAL SWITCH ORDERING EXAMPLE
Series B
B
POLES
1
2
SPDT
DPDT
1
2
A
B
PC TERMINALS
P
*
B
*
H
*
V
W
Straight
Straight with Bracket
Right Angle with Bracket
Vertical with Bracket
Straight Long
*
Bracketed models are ESD protected
CIRCUITS
2
3
5
*R
8
9
*S
ON
ON
ON
(ON)
(ON)
ON
(ON)
NONE
OFF
NONE
NONE
OFF
OFF
OFF
ON
ON
(ON)
ON
(ON)
(ON)
ON
J
E
H
K
L
A
A1
TOGGLES
.394” (10.0mm) Bat
.315” (8.0mm) Bat with
Panel Seal Threaded Bushing
(Straight PC only)
.248” (6.3mm) Bat
.394” (10.0mm) Flatted
.248” (6.3mm) Flatted
Snap Top for A or B Paddle
Locking Lever
(with Circuits 2 & 3 only)
G
J
OPTIONAL CAPS
.394” (10.0mm) Bat Lever Cap
.248” (6.3mm) Bat Lever Cap
PADDLES
A
B
Short Paddle for K Toggle
Long Paddle for K Toggle
( ) = Momentary
*
Reverse circuits R & S
available with right angle
& vertical only
CAP
COLORS
A
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
B
C
---
---
.394” (10.0mm)
Bat Toggle
---
---
Black
White
Red
Yellow
Green
Blue
Gray
PADDLE
COLORS
A
B
C
E
F
G
H
B12AB
Straight PC Terminals
with Bracket
SPDT
ON-NONE-ON Circuit
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Process Sealed Subminiature Antistatic Toggles
POLES & CIRCUITS
Toggle Position
( ) = Momentary
Up
Pole
Model
B12
B13
B15
B1R
B18
B19
B1S
B22
B23
B25
B2R
B28
B29
B2S
Slot
Series B
Connected Terminals
Up
Slot
Throw & Schematics
Note:
Terminal numbers are
not actually on the switch.
Center
Down
Center
Down
SP
ON
ON
ON
(ON)
(ON)
ON
(ON)
ON
ON
ON
(ON)
(ON)
ON
(ON)
NONE
OFF
NONE
NONE
OFF
OFF
OFF
NONE
OFF
NONE
NONE
OFF
OFF
OFF
ON
ON
(ON)
ON
(ON)
(ON)
ON
ON
ON
(ON)
ON
(ON)
(ON)
ON
2 (COM)
2-3
OPEN
2-1
SPDT
3
1
DP
2-3 5-6
OPEN
2-1 5-4
DPDT
3
2
(COM)
1
6
5
4
TOGGLES
Standard Material & Finish:
Brass with Bright Nickel
.394” (10.0mm)
Bat
.315” (8.0mm) Bat with
Panel Seal Threaded Bushing
.248” (6.3mm)
Bat
.394” (10.0mm)
Flatted
A
A1
J
E
26°
(2.6) Dia
.102
(10.0)
.394
(8.0)
.315
26°
(2.6) Dia
.102
(6.3)
.248
26°
26°
(2.6) Dia
.102
(10.0)
.394
(1.6)
.063
(2.7)
.106
H
.248” (6.3mm) Flatted
K
Snap Top for Paddles
L
Locking Lever
26°
26°
(1.6)
.063
(6.3)
.248
(2.6)
.102
(5.0)
.197
26°
(2.5)
.098
(12.5)
.492
(4.5) Dia
.177
(5.1) Dia
.201
(11.5)
.453
(5.9)
.232
(5.8)
.228
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Process Sealed Subminiature Antistatic Toggles
PC TERMINALS
Use of a support bracket is recommended to increase PCB mounting strength and stability.
Series B
P
Straight
B
Straight with Bracket
(10.16)
.400
H
Right Angle with Bracket
(2.54) Typ
.100
(5.08)
.200
(0.6) Dia Typ
.024
(5.08)
.200
(5.08)
.200
(0.6) Typ
.024
(2.54) Typ
.100
(0.6) Dia Typ
.024
(0.4) Typ
.016
(3.1)
.122
(2.54) Typ
.100
(0.6) Dia Typ
.024
(2.54) Typ
.100
(0.6)
.024 (0.4)
.016
(0.5) Typ
.020
(3.1) Typ
.122
V
Vertical with Bracket
(0.5) Typ
.020
(0.6) Dia Typ
.024
(2.54) Typ
.100
(0.6)
.024
(0.4)
.016
W
Straight Long
(5.08)
.200
(2.54) Typ
.100
(0.6) Dia Typ
.024
(18.9)
.744
OPTIONAL CAPS
G
AT4003
.394” (10.0mm) Bat Lever Cap
26°
(3.0) Dia
.118
26°
(3.0) Dia
.118
(7.0)
.276
(6.3)
.248
J
AT4064
.248” (6.3mm) Bat Lever Cap
Material: PVC
Colors Available:
A, B, C
(11.0)
.433
(10.0)
.394
Material: PVC
Colors Available:
A, B, C
PADDLES
A
AT467
Short Paddle for K Toggle
26°
(2.4)
.094
(4.6)
.181
(5.0)
.197
(9.4)
.370
B
AT468
Long Paddle for K Toggle
26°
(2.4)
.094
(4.4)
.173
Material: Polyamide
Colors Available:
A, B, C, E, F, G, H
(10.3)
.406
Material: Polyamide
Colors Available:
A, B, C, E, F, G, H
(15.1)
.594
(5.0) Dia
.197
(14.2)
.559
Color Codes:
A
Black
B
White
C
Red
E
Yellow
F
Green
G
Blue
H
Gray
03-07
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
京公网安备 11010802033920号
EEWORLD
