FAST TTL Pulse Generator Module
The FAST TTL Pulse Generator Modules manufactured by Engineered Components Company are designed to
provide a precise output pulse width when triggered by variable pulse width inputs. These pulse generators
provide a stable positive (+), as well as negative(-), output pulse of the specified width for each rising edge
of the input pulse. The input pulse must be low for a minimum of 10 ns before rising to a high for a minimum
of 10ns. No output pulse occurs for each falling edge of the input pulse. Maximum input pulse repetition
rates are shown in the table below.
The MTBF on these modules, when calculated per MIL-HDBK-217, for a 50 deg.C ground fixed environment and
with 50VDC applied, is in excess of 3 million hours. The temperature coefficient of delay is less than
+/-100 ppm/deg.C over the operating temperature range of 0 to +70 deg. C.
The module is provided in a 14-pin DIP package, fully encapsulated in epoxy resin and is housed in a Diallyl
Phthalate case, blue in color. The case marking is applied by silkscreen using white epoxy paint. The 5 copper
leads are tin-lead plated and meet the solderability requirements of MIL-STD-202, Method 208.
Product Selection Table
(Add F Suffix for Thru-Hole Leads, G Suffix for Gull-Wing Leads, or J Suffix for J-Leads)
BLOCK DIAGRAM
V
.400
FPGM-TTL-25
+
.800
Operating Specifications:
All measurements made at 25 deg. C
All measurements made with Vcc = +5VDC
All measurements made with (1) FAST TTL output load
Operating Temperature: 0 to +70 deg. C
Storage Temperature: -55 to +125 deg. C
Vcc Supply Voltage: 4.75 to 5.25VDC
Vcc Supply Current: 40mA typical
Logic “High” Input:
Voltage: 2.0VDC min. ; Vcc max.
Current: 2.7VDC = 20uA max. ; 5.5VDC = 1mA max.
Logic “Low” Input:
Voltage: 0.8 VDC max.
Current: -0.6mA max.
Logic “High” Voltage Out: 2.7VDC min.
Logic “Low” Voltage Out: 0.5VDC max.
Special modules can often be manufactured to provide for customer specific applications.
engineered components company
A Division of Cornucopia Tool & Plastics, Inc. PO Box 1915, 448 Sherwood Rd., Paso Robles CA 93447
YYWW
.250
MADE IN USA
Part
Number
FPGM-TTL-10
FPGM-TTL-11
FPGM-TTL-12
FPGM-TTL-13
FPGM-TTL-14
FPGM-TTL-15
FPGM-TTL-16
FPGM-TTL-17
FPGM-TTL-18
FPGM-TTL-19
FPGM-TTL-20
FPGM-TTL-21
FPGM-TTL-22
FPGM-TTL-23
FPGM-TTL-24
FPGM-TTL-25
FPGM-TTL-30
FPGM-TTL-35
FPGM-TTL-40
FPGM-TTL-45
FPGM-TTL-50
FPGM-TTL-60
FPGM-TTL-70
FPGM-TTL-75
FPGM-TTL-80
FPGM-TTL-90
FPGM-TTL-100
FPGM-TTL-150
FPGM-TTL-200
FPGM-TTL-250
FPGM-TTL-300
FPGM-TTL-400
FPGM-TTL-500
FPGM-TTL-600
FPGM-TTL-700
FPGM-TTL-800
FPGM-TTL-900
FPGM-TTL-1000
Pulse Width
(in ns)
10+/-1.0
11+/-1.0
12+/-1.0
13+/-1.0
14+/-1.0
15+/-1.0
16+/-1.0
17+/-1.0
18+/-1.0
19+/-1.0
20+/-1.0
21+/-1.0
22+/-1.0
23+/-1.0
24+/-1.0
25+/-1.0
30+/-1.0
35+/-1.5
40+/-1.5
45+/-1.5
50+/-1.5
60+/-2.5
70+/-2.0
75+/-2.0
80+/-2.0
90+/-3.0
100+/-3.0
150+/-4.0
200+/-6.0
250+/-7.0
300+/-9.0
400+/-10.0
500+/-10.0
600+/-14.0
700+/-16.0
800+/-18.0
900+/-20.0
1000+/-22.0
Maximum Repetition
Rate (in MHz)
60.0
56.0
53.0
51.0
48.0
46.0
44.0
42.0
40.0
38.0
37.0
35.0
34.0
33.0
32.0
31.0
26.0
23.0
20.0
18.0
17.0
14.5
12.5
11.5
11.0
9.5
8.5
6.0
4.5
3.5
3.0
2.2
1.8
1.5
1.3
1.1
1.0
0.9
V
IN
14
8
Pulse
Generator
7
13
1
-
+
C
MECHANICAL DIAGRAM
.150 TYP.
.300
.060 TYP.
.100
.300
TYP.
.020 DIA. TYP.
.030
DATE CODE
+/-.020
.130
-
IN
Top view
C
Phone: 805-369-0034
Fax:
805-369-0033
Web: www.ec2.com
京公网安备 11010802033920号
EEWORLD
