®
ICL3221E, ICL3222E, ICL3223E,
ICL3232E, ICL3241E, ICL3243E
Data Sheet
June 22, 2007
FN4910.19
±15kV
ESD Protected, +3V to +5.5V,
1Microamp, 250kbps, RS-232
Transmitters/Receivers
The Intersil ICL32xxE devices are 3.0V to 5.5V powered
RS-232 transmitters/receivers which meet ElA/TIA-232 and
V.28/V.24 specifications, even at V
CC
= 3.0V. Additionally,
they provide
±
15kV ESD protection (IEC61000-4-2 Air Gap
and Human Body Model) on transmitter outputs and receiver
inputs (RS-232 pins). Targeted applications are PDAs,
Palmtops, and notebook and laptop computers where the
low operational, and even lower standby, power
consumption is critical. Efficient on-chip charge pumps,
coupled with manual and automatic powerdown functions
(except for the ICL3232E), reduce the standby supply
current to a 1µA trickle. Small footprint packaging, and the
use of small, low value capacitors ensure board space
savings as well. Data rates greater than 250kbps are
guaranteed at worst case load conditions. This family is fully
compatible with 3.3V-only systems, mixed 3.3V and 5.0V
systems, and 5.0V-only systems.
The ICL324XE are 3-driver, 5-receiver devices that provide a
complete serial port suitable for laptop or notebook
computers. Both devices also include noninverting
always-active receivers for “wake-up” capability.
The
ICL3221E, ICL3223E and ICL3243E,
feature an
automatic powerdown
function which powers down the
on-chip power-supply and driver circuits. This occurs when
an attached peripheral device is shut off or the RS-232 cable
is removed, conserving system power automatically without
changes to the hardware or operating system. These
devices power up again when a valid RS-232 voltage is
applied to any receiver input.
Table 1 summarizes the features of the devices represented
by this data sheet, while Application Note AN9863
summarizes the features of each device comprising the
ICL32xxE 3V family.
Features
• ESD Protection for RS-232 I/O Pins to
±
15kV (IEC61000)
• Drop in Replacements for MAX3221E, MAX3222E,
MAX3223E, MAX3232E, MAX3241E, MAX3243E,
SP3243E
• ICL3221E is a Low Power, Pin Compatible Upgrade for 5V
MAX221E
• ICL3222E is a Low Power, Pin Compatible Upgrade for 5V
MAX242E, and SP312E
• ICL3232E is a Low Power Upgrade for HIN232E, ICL232
and Pin Compatible Competitor Devices
• RS-232 Compatible with V
CC
= 2.7V
• Meets EIA/TIA-232 and V.28/V.24 Specifications at 3V
• Latch-Up Free
• On-Chip Voltage Converters Require Only Four External
0.1µF Capacitors
• Manual and Automatic Powerdown Features
• Guaranteed Mouse Driveability (ICL324XE Only)
• Receiver Hysteresis For Improved Noise Immunity
• Guaranteed Minimum Data Rate . . . . . . . . . . . . . 250kbps
• Wide Power Supply Range . . . . . . . Single +3V to +5.5V
• Low Supply Current in Powerdown State. . . . . . . . . . .1µA
• Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
• Any System Requiring RS-232 Communication Ports
- Battery Powered, Hand-Held, and Portable Equipment
- Laptop Computers, Notebooks, Palmtops
- Modems, Printers and other Peripherals
- Digital Cameras
- Cellular/Mobile Phones
Related Literature
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
TABLE 1. SUMMARY OF FEATURES
NUMBER OF
MONITOR
RECEIVERS
(R
OUTB
)
0
0
0
0
2
1
DATA
RATE
(kbps)
250
250
250
250
250
250
RECEIVER
ENABLE
FUNCTION?
Yes
Yes
Yes
No
Yes
No
AUTOMATIC
POWERDOWN
MANUAL
POWER-DOWN? FUNCTION?
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
No
No
Yes
PART
NUMBER
ICL3221E
ICL3222E
ICL3223E
ICL3232E
ICL3241E
ICL3243E
NUMBER NUMBER
OF Tx
OF Rx
1
2
2
2
3
3
1
2
2
2
5
5
READY
OUTPUT?
No
No
No
No
No
No
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
|
Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2000-2005, 2007. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
ICL3221E, ICL3222E, ICL3223E, ICL3232E, ICL3241E, ICL3243E
Pinouts
(Continued)
ICL3241E
(28 LD SOIC, SSOP, TSSOP)
TOP VIEW
C2+ 1
C2- 2
V- 3
R1IN 4
R2IN 5
R3IN 6
R4IN 7
R5IN 8
T1OUT 9
T2OUT 10
T3OUT 11
T3IN 12
T2IN 13
T1IN 14
28 C1+
27 V+
26 VCC
25 GND
24 C1-
23 EN
22 SHDN
21 R1OUTB
20 R2OUTB
19 R1OUT
18 R2OUT
17 R3OUT
16 R4OUT
15 R5OUT
ICL3243E
(28 LD SOIC, SSOP, TSSOP)
TOP VIEW
C2+ 1
C2- 2
V- 3
R1IN 4
R2IN 5
R3IN 6
R4IN 7
R5IN 8
T1OUT 9
T2OUT 10
T3OUT 11
T3IN 12
T2IN 13
T1IN 14
28 C1+
27 V+
26 VCC
25 GND
24 C1-
23 FORCEON
22 FORCEOFF
21 INVALID
20 R2OUTB
19 R1OUT
18 R2OUT
17 R3OUT
16 R4OUT
15 R5OUT
Pin Descriptions
PIN
VCC
V+
V-
GND
C1+
C1-
C2+
C2-
TIN
TOUT
RIN
ROUT
ROUTB
INVALID
EN
SHDN
System power supply input (3.0V to 5.5V).
Internally generated positive transmitter supply (+5.5V).
Internally generated negative transmitter supply (-5.5V).
Ground connection.
External capacitor (voltage doubler) is connected to this lead.
External capacitor (voltage doubler) is connected to this lead.
External capacitor (voltage inverter) is connected to this lead.
External capacitor (voltage inverter) is connected to this lead.
TTL/CMOS compatible transmitter Inputs.
±15kV
ESD Protected
,
RS-232 level (nominally
±5.5V)
transmitter outputs.
±15kV
ESD Protected
,
RS-232 compatible receiver inputs.
TTL/CMOS level receiver outputs.
TTL/CMOS level, noninverting, always enabled receiver outputs.
Active low output that indicates if no valid RS-232 levels are present on any receiver input.
Active low receiver enable control; doesn’t disable R
OUTB
outputs.
Active low input to shut down transmitters and on-board power supply, to place device in low power mode.
FUNCTION
FORCEOFF Active low to shut down transmitters and on-chip power supply. This overrides any automatic circuitry and FORCEON (see Table 2).
FORCEON
Active high input to override automatic powerdown circuitry thereby keeping transmitters active. (FORCEOFF must be high).
5
FN4910.19
June 22, 2007
TI Technology Forum
京公网安备 11010802033920号
EEWORLD
