ABMM-FREQ-18-R080-B-4 datasheet, PDF

Datasheet> All Categories > Passive components> Crystal/resonator> ABMM-FREQ-18-R080-B-4

ABMM-FREQ-18-R080-B-4: DescriptionParallel - 3Rd Overtone Quartz Crystal, 33MHz Min, 125MHz Max, ROHS COMPLIANT, CERAMIC PACKAGE-4; CategoryPassive components Crystal/resonator; File Size183KB，2 Pages; ManufacturerAbracon; Websitehttp://www.abracon.com/index.htm; Environmental Compliance

Download Datasheet Parametric View All

ABMM-FREQ-18-R080-B-4 Overview

Parallel - 3Rd Overtone Quartz Crystal, 33MHz Min, 125MHz Max, ROHS COMPLIANT, CERAMIC PACKAGE-4

ABMM-FREQ-18-R080-B-4 Parametric

Parameter Name	Attribute value
Is it lead-free?	Lead free
Is it Rohs certified?	conform to
Maker	Abracon
package instruction	ROHS COMPLIANT, CERAMIC PACKAGE-4
Reach Compliance Code	compliant
Other features	AT CUT CRYSTAL; BULK
Ageing	5 PPM/YEAR
Crystal/Resonator Type	PARALLEL - 3RD OVERTONE
Drive level	100 µW
frequency stability	0.005%
frequency tolerance	30 ppm
JESD-609 code	e4
load capacitance	18 pF
Manufacturer's serial number	ABMM
Installation features	SURFACE MOUNT
Maximum operating frequency	125 MHz
Minimum operating frequency	33 MHz
Maximum operating temperature	70 °C
Minimum operating temperature	-20 °C
physical size	L7.0XB5.0XH1.3 (mm)/L0.276XB0.197XH0.051 (inch)
Series resistance	80 Ω
surface mount	YES
Terminal surface	Silver (Ag)
Base Number Matches	1

Preview

Download Datasheet

View All

CERAMIC SURFACE MOUNT MICROPROCESSOR CRYSTAL

ABMM

FEATURES:

• Suitable for reflow

• Low in height - suitable for thin equipment

• AT-strip cut offers a tight tolerance & stability

APPLICATIONS:

• Computers, Modems, Microprocessors

• Communication, Test equipment

• PCMCIA

RoHS

Compliant

7.0 x 5.0 x 1.3 mm

| | | | | | | | | | | | | | |

STANDARD SPECIFICATIONS:

PARAMETERS

ABRACON P/N

Frequency Range

Operation Mode

ABMM

6.0 MHz to 125 MHz

AT (see option)

Fundamental 6.0 MHz - 33.0 MHz

Third-Overtone for F ~ 33.01 MHz - 125 MHz

- 10°C to + 60°C (see options)

- 40°C to + 85°C

± 50 ppm max. (see options)

± 50 ppm max. (see Table 1); ± 100 ppm @

-10 °C to + 60° C for Fundamental BT

See Table 1

7pF max.

18pF (see options)

500μW max., 100μW typical

± 5ppm max.

500MW min at 100Vdc ± 15V

TABLE 1

Frequency (MHz)

6.000 - 11.999(Fund)

12.000 - 20.000(Fund)

20.000 - 33.000(Fund)

33.000 - 125.00(3rd O/T)

ESR (Ω)

Operating Temperature

Storage Temperature

Frequency Tolerance at +25°C

Frequency Stability over the

Operating Temp. (Ref to +25°C)

Equivalent Series Resistance

Shunt Capacitance C

Load Capacitance C

Drive Level

Aging at 25°C Per Year

Insulation Resistance

OPTIONS & PART IDENTIFICATION:

(Left blank if standard)

ABMM - Frequency -

Frequency

XX.XXXX MHz

-R

Packaging

Blank

Bulk

Load Capacitance

Please specify CL in pF or

S for Series

Freq. Tolerance

± 10 ppm max.

± 15 ppm max.

± 20 ppm max.

± 25 ppm max.

± 30 ppm max.

Tape & Reel

Mode

Fund.AT>=33MHz

Fund BT*

(*) Note: ±100ppm max stability

ESR

RXXX (Value in

)

from -10ºC to +60ºC only.

Operating Temp.

0°C ~ +70°C

-20°C ~ +70°C

-30°C ~ +70°C

-30°C ~ +85°C

-40°C ~ +85°C

ABRACON IS

ISO 9001 / QS 9000

CERTIFIED

Freq. Stability

± 10 ppm max.

± 15 ppm max.

± 20 ppm max.

± 25 ppm max.

± 30 ppm max.

± 35 ppm max.

Revised: 05.24.07

30332 Esperanza, Rancho Santa Margarita, California 92688

tel 949-546-8000

fax 949-546-8001

| www.abracon.com

Recommended Resources

Resistor and Capacitor (LC) Circuit Diagram

DC motor reverse braking circuit a

Infrared reflective automatic light circuit

Liquid level controller circuit

BCD-Binary number conversion circuit diagram

555 passive infrared alarm circuit

FPGA Design Process: FPGA Design Process...; zxopenljx EE_FPGA Learning Park

Power supply obstacles + power supply SBC selection and pitfalls: Hello everyone, I am an automotive electronics hardware engineer. When selecting a power SBC, you should pay attention to the battery voltage range and then combine it with the test standards to selec...; 你好再见 Power technology

Sharing of key points on the use of ADI passive components: Sharing of key points on the use of ADI passive components...; 勤奋 ADI Reference Circuit

Four design considerations for telematics hardware in connected cars: It may surprise you to learn that a technology that has been around for nearly two decades has paved the way for connected cars. ECall is old fashioned by high-tech standards, but it is now mandatory ...; alan000345 TI Technology Forum

Wide voltage input USB-C, 5V/3A output adapter reference design: USB-C, DFP, 5V/3A output, 85-265VAC input, adapter, low cost reference designThe UCC28700 and TPS25810 are used to provide isolated 5 V at 3 A over the USB type C interface. The UCC28700 performs prim...; qwqwqw2088 Analogue and Mixed Signal

When the machine is turned off, the LDO output is normally 3V. Why does the voltage reach 3.5V after the machine is turned on? What is the reason?: When the machine is turned off, the LDO output is normally 3V. Why does the voltage reach 3.5V after the machine is turned on? What is the reason?...; QWE4562009 Integrated technical exchanges

Shortcut: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

Popular Components