FEATURES AND SPECIFICATIONS
Brad
®
Foundation Fieldbus
Cordsets and Receptacles
130041
Mini-Change
®
FF
Cordsets
130042
Micro-Change
®
FF
Cordsets
130040
Micro-Change &
Mini-Change FF
Receptacles
130045
Micro-Change &
Mini-Change Tees
130044
Micro-Change &
Mini-Change Field
Attachables
Features and Benefits
n
Mini-Change and Micro-Change are proven,
rugged connector designs
n
IP67-rated connectors provide a dust-tight and
water-tight connection
n
Quick-connect, modular wiring system with
keyed, pre-wired molded connectors provide
fast installation that eliminates field wiring errors
n
Foundation Fieldbus ‘Type A’ compliant shielded
cables allows users to take full advantage of the
maximum run lengths possible per the protocol while
minimizing the potential for communication errors
Molex releases the Brad Mini-Change and Micro-Change molded connection systems for fast,
error-free Foundation Fieldbus installations
Foundation Fieldbus is a communication protocol used
to interconnect field-level instrumentation and control
devices to a PLC (Programmable Logic Controller)
or DCS (Distributed Control System) controller in
a process automation control system. Foundation
Fieldbus is employed in the control systems of oil & gas
production, refineries, petrochemical plants, chemical
manufacturing and pharmaceutical manufacturing.
At the physical-layer level, Foundation Fieldbus allows
multiple devices to communicate digitally over the
same wire. The Foundation Fieldbus physical layer,
i.e., cable/transmission signal requirements, is
specified in the ISA SP50.02 and IEC 1158-2 standard
for fieldbuses. The cable specifications are listed in
the Cable Standard FF-844 , which is issued by the
Fieldbus Foundation, the organization that controls
and maintains this open standard. Brad Foundation
Fieldbus products from Molex are fully complaint to
these specifications.
Brad Foundation Fieldbus products from Molex are
based on the proven Mini-Change and Micro-Change
circular, circular connector families. These sealed,
watertight connectors offer the ruggedness required
in the most demanding industrial applications. The
pre-wired, keyed connectors provide a modular
wiring system that is not prone to field wiring
termination errors.
For additional product information visit:
www.molex.com/link/fieldbus.html.
SPECIFICATIONS
Mini-Change
Electrical
Voltage (max.): 300V AC/DC
Amperage (max.): 10A
Initial Contact Resistance: < 5mΩ avg. @ 3
Resistance after Durability Testing: < 5mΩ avg. @ 3
Mechanical
Molded Body: PVC
Insert: PVC
Contact: Patented, Quad-Beam Design. Brass with
Gold Plate. Stainless Steel Outer Sleeve
Coupling Nut / Receptacle Shell: 316 Stainless Steel
or Nickel Plated Brass
Axial Pull Strength: 100 lbs
Side Load Strength: 20 lbs
Environmental
Environmental Seal: IP67
Cable Temperature: -40° to +105°C (-40° to +221°F)
Micro-Change
Electrical
Voltage (max.): 250V AC / DC
Amperage (max.): 4A
Initial Contact Resistance: < 5mΩ avg. @ 3
Resistance after Durability Tests: < 5mΩ avg. @ 3
Mechanical
Molded Body: PVC
Insert: Nylon
Contact: Brass with Gold Plate.
O-ring: Viton
Coupling Nut / Receptacle Shell: 316 Stainless Steel
or Nickel Plated Brass
Axial Pull Strength: 50 lbs.
Side Load Strength: 20 lbs.
Environmental
Environmental Seal: IP67
Cable Temperature: -40° to +105°C (-40° to +221°F)
n
Stainless steel or nickel plated cordset coupling nuts
and receptacle shells ensure corrosion resistance in
demanding environments
APPLICATIONS
Brad
®
Foundation Fieldbus
Cordsets and Receptacles
130041
Mini-Change
®
FF
Cordsets
130042
Micro-Change
®
FF
Cordsets
130040
Micro-Change &
Mini-Change FF
Receptacles
130045
Micro-Change &
Mini-Change Tees
130044
Micro-Change &
Mini-Change Field
Attachables
Description
MC 4P FP STR SS316 CNUT #18-2 FF Cable – 2M
MC 4P FP STR SS316 CNUT #18-2 FF Cable – 5M
MC 4P FP STR SS316 CNUT #18-2 FF Cable – 10M
MC 4P FP 90 SS316 CNUT #18-2 FF Cable – 2M
MC 4P FP 90 SS316 CNUT #18-2 FF Cable – 5M
MC 4P FP 90 SS316 CNUT #18-2 FF Cable – 10M
MC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable – 0.6M
MC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable – 1M
MC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable – 2M
MC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable – 3M
MC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable – 4M
MC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable – 5M
N/A
3313
N/A
Sample Plant No.
3313
N/A
Foundation Fieldbus is commonly found in the following Process Automation implementations:
n
Oil & Gas Production and Transportation Facilities
n
Oil Refineries
n
Petrochemical Complexes
n
Chemical Production Plants
n
Waste-Water Processing Plants
n
Pharmaceutical Manufacturing
n
Food & Beverage Processing
ORDERING INFORMATION
Mini-Change Cordsets with SS316 Coupling Nuts
SAP Material #
1300410016
Single Ended Cordsets
Fem-Str
1300410017
1300410018
1300410019
Fem-90D
Female-Male
1300410020
1300410021
1300410028
1300410029
Double Ended Cordsets
1300410030
Str-Str
1300410031
1300410032
1300410033
Engineering Part # **
104000D09M0208
104000D09M0508
104000D09M1008
104001D09M0208
104001D09M0508
104001D09M1008
114030D09M0068
114030D09M0108
114030D09M0208
114030D09M0308
114030D09M0408
114030D09M0508
**Available Cable Options
D07 18/3 Orange FF Shielded Cbl, w/gnd, w/drain, PVC
D08 18/3 Blue FF Shielded Cbl, w/gnd, w/drain, PVC
D09 18/2 Orange FF Shielded Cbl, w/o gnd, w/drain, PVC
D10 18/2 Blue FF Shielded Cbl, w/o gnd, w/drain, PVC
Mini-Change Receptacles and Accessories with Stainless Steel Hardware
SAP Material #
Female
Receptacles
Terminator
Tee
Closure Caps
Field Attachable
Bulkhead Pass-Thru
For Female
For Male
Female
Male
Fem-Male
Male
Male
1300400013
1300400014
1300400015
1300460004
1300450002
1302011110
1302011113
1300440001
1300440002
1300131001
Engineering Part #
1R4000A42M0058
1R4006A42M0058
1R4M36A42M0058
104006FF8
T140140-001FF8
65-0085SS
65-0086SS
1A4000-34FF8
1A4006-34FF8
1R40301
Description
MC 4P F/FR #18 1/2NPT SSS316 – 0.5M
MC 4P MR #18 1/2NPT SS316 – 0.5M
MC 4P MR #18 M20X1.5 SS316 – 0.5M
Mini-Change, Male FF terminator w/ SS316 CNUT
TEE – MC In, MC Out, MC Drop w/ SS316 CNUT
MC Closure Cap for Female Connector – SS w/ bead chain
MC Closure Cap for Male Connector – SS w/ bead chain
MC 4P F-ATTACH STR PG 13.55 FF w SS316 CNUT
MC 4P M-ATTACH STR PG 13.55 FF w SS316 CNUT
MC 4P M/MFE BULKHEAD FEED – THRU - SS
Sample Plant No.
3313
3313
N/A
3313
3313
3313
3313
3313
3313
N/A
ORDERING INFORMATION
Brad
®
Foundation Fieldbus
Cordsets and Receptacles
130041
Mini-Change
®
FF
Cordsets
130042
Micro-Change
®
FF
Cordsets
130040
Micro-Change &
Mini-Change FF
Receptacles
130045
Micro-Change &
Mini-Change Tees
130044
Micro-Change &
Mini-Change Field
Attachables
Engineering Part # **
804000D09M0208
804000D09M0508
804000D09M1008
804001D09M0208
804001D09M0508
804001D09M1008
884030D09M0068
884030D09M0108
884030D09M0208
884030D09M0308
884030D09M0408
884030D09M0508
Description
MIC 4P FP STR SS316 CNUT #18-2 FF Cable – 2M
MIC 4P FP STR SS316 CNUT #18-2 FF Cable – 5M
MIC 4P FP STR SS316 CNUT #18-2 FF Cable – 10M
MIC 4P FP 90 SS316 CNUT #18-2 FF Cable – 2M
MIC 4P FP 90 SS316 CNUT #18-2 FF Cable – 5M
MIC 4P FP 90 SS316 CNUT #18-2 FF Cable – 10M
MIC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable – 0.6M
MIC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable – 1M
MIC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable – 2M
MIC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable – 3M
MIC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable – 4M
MIC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable – 5M
N/A
3313
N/A
Sample Plant No.
3313
N/A
Micro-Change Cordsets with SS316 Coupling Nuts
SAP Material #
1300420030
Single Ended Cordsets
Fem-Str
1300420031
1300420032
1300420033
Single Ended Cordsets
Fem-90D
Fem-Male
1300420034
1300420035
1300420042
1300420043
Double Ended Cordsets
1300420044
Str-Str
1300420045
1300420046
1300420047
**Available Cable Options
D07 18/3 Orange FF Shielded Cbl, w/gnd, w/drain, PVC
D08 18/3 Blue FF Shielded Cbl, w/gnd, w/drain, PVC
D09 18/2 Orange FF Shielded Cbl, w/o gnd, w/drain, PVC
D10 18/2 Blue FF Shielded Cbl, w/o gnd, w/drain, PVC
Micro-Change Receptacles and Accessories with Stainless Steel Hardware
SAP Material #
Receptacle
Receptacle
Terminator
Tee
Closure Caps
Closure Caps
Bulkhead Feed-Thru
For Female
For Male
Fem-Male
Female
Male
Male
1300400006
1300400007
1300460008
1300350097
1200770065
1200770139
1200700408
8R4L301
Engineering Part #
WR4000A42M0058
WR4006A42M0058
804006FF8
MICT5558
80014
Description
MIC 4P F/FR #18 1/2NPT – SS316 – 0.5M
MIC 4P MR# 18 1/2 NPT – SS316 – 0.5M
Micro-Change, Male FF terminator w/SS316 CNUT
TEE – MIC In, MIC Out, MIC Drop w/ SS316 CNUT
M12 Closure Cap for Fem Connector, SS w/SS bead chain
M12 Closure Cap for Male Connector, SS w/ SS bead chain
MIC4P M/MFE BULKHEAD FEED-THRU-SS
Sample Plant No.
N/A
3313
3313
3313
3313
3313
N/A
www.molex.com/link/fieldbus.html
Americas Headquarters
Lisle, Illinois 60532 U.S.A.
1-800-78MOLEX
amerinfo@molex.com
Order No. 987650-2541
Asia Pacific North Headquarters
Yamato, Kanagawa, Japan
81-46-265-2325
apninfo@molex.com
Asia Pacific South Headquarters
Jurong, Singapore
65-6268-6868
apsinfo@molex.com
USA/KC/2008.11
European Headquarters
Munich, Germany
49-89-413092-0
eurinfo@molex.com
Corporate Headquarters
2222 Wellington Ct.
Lisle, IL 60532 U.S.A.
P: 630-969-4550 F: 630-969-
1352
© 2008, Molex
京公网安备 11010802033920号
EEWORLD
