-
China Energy Storage Network:
Recently, the European Union announced that it would invest 1.1 billion euros in seven large-scale innovation projects in many European countries under the "In...[Details]
-
The auxiliary motor of electric locomotive is mainly an auxiliary device designed to ensure the normal operation of the main circuit. Whether it is put into operation depends on the working state o...[Details]
-
Würth Electronics Supercapacitor WCAP-SISC Rapid Energy Boost
Waldenburg (Germany), September 6, 2022 -
Würth Elektronik introduces new EDLC supercapacitors (electric double laye...[Details]
-
Introduction
All MEMS microphones have an omnidirectional pickup response, which means they respond equally to sounds coming from all directions. Multiple microphones can be configured in an a...[Details]
-
Beijing, China (August 15, 2024) -
GigaDevice Technology Group Co., Ltd. (hereinafter referred to as "GigaDevice"), an industry-leading semiconductor device supplier, and Arm Technology (China)...[Details]
-
The news that Apple 15 (iPhone 15) may be equipped with a USB-C charging interface is on the hot search again. There are currently two mainstream charging interfaces in the world. The Android platfor...[Details]
-
Introduction
Low power consumption is a key feature that embedded electronic products must have. With the rapid development and improvement of hardware technology, it is difficult to make...[Details]
-
At the upcoming 2nd China International Import Expo, Infineon Technologies will bring its 3D printed humanoid robot Roboy 2.0, which uses multiple technologies, to China for the first time. Roboy is ...[Details]
-
UPS testing generally includes three types: steady-state testing, dynamic testing, and conventional testing. Steady-state testing is to test the phase voltage, line voltage, no-load loss, power f...[Details]
-
As the title, the code is as follows: $regfile = "attiny45.dat" 'Specify the microcontroller model $crystal = 8000000 'Specify the frequency $hwstack = 2 $swstack = 8 $framesize = 24 ...[Details]
-
1. Installation and use of mass flow meter (1) General points There should be at least 0.6m distance between the sensor and large transmitters or motors. Since the sensor relies on electromagnetic fi...[Details]
-
ARM assembly has ldr instruction and ldr, adr pseudo-instructions, they can all use label expressions as operands. The following will illustrate their differences by analyzing a piece of code and the ...[Details]
-
1. Hardware Wiring 1. Ordinary SPI device wiring For example, NRF24L01 can be directly connected to IO 2. FLASH device wiring For example, GD25Q80BSIG needs to add a pull-up resistor 2. Programmi...[Details]
-
If safety in production is not done well, casualties and occupational diseases will occur, the safety and health of workers will be endangered, and production will suffer huge losses. Production mu...[Details]
-
With the rapid development of microelectronics and computer information technology, wireless data communication systems composed of single-chip microcomputers and wireless transmission modules have...[Details]
PCB Design
京公网安备 11010802033920号
EEWORLD
