Fiber Optic Patch Cords
Singlemode
All patch cords undergo stringent testing for both
insertion loss and return loss at the factory before
shipment to ensure that only quality product is
delivered to the customer.
ADC offers ultra physical contact polish on the
SC, ST
®
, FC, and LC connector styles. Typical
insertion loss is 0.1 dB.
Angled polish is available on the new LX.5
®
small
form factor connector, SC, FC, and the E-2000
connector styles. Angled polish should be used in
applications that require better control of return
loss. ADC has tight tolerances regarding the
rotation of the ferrule to maintain low insertion
loss values.
Broadcast Products
Singlemode Patch Cord
Ordering Number
__ __ - __ -
S
- __
M
Cable Option
FPC Connector on both ends (patch cord)
FPT Connector on one end (pigtail)
Cable Type
Leave
3 mm single
Blank
M 2 mm single
F 1.7 mm single
9 900 micron
Z 3 mm dual zip
2 2 mm dual zip
T 1.7 mm dual zip
Length
X Length in meters
Connector Type***
SPSC SC ultra polish
SPST ST
®
ultra polish
SPFC FC ultra polish
APSC SC angled polish
APFC FC angled polish
ALX5 LX.5
®
angled polish*
AE2 E-2000 angled polish
SPLC LC ultra polish*
SDSC SC duplex**
ADLX LX.5
®
angled polish duplex*
•
1180270
3/03
*Requires 900 micron or 1.7 mm cable.
**One connector per end; requires zip cable.
***For hybrid patch cords, enter both connector types in this field, separate them with a
slash mark and remove the “S” from the second connector.
Ordering Example
FPC2-SPFC-10M: Patch cord with ultra polish FC connectors on both ends, 2 mm dual zip
cable, 10 meters in length with standard breakout length of 12" on both ends.
FPC-SPST/PSC-S-10M: Patch cord with ST
®
ultra polish connector on one end and SC ultra
polish connector on the other end, 10 meters in length.
w w w. a d c . c o m
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
•
1 - 8 0 0 - 7 2 6 - 4 2 6 6
169
京公网安备 11010802033920号
EEWORLD
