2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail
•
•
•
•
•
MP2 Series
6.50 Amps per contact
End-to-end stackable
Press or heat stake peg (solder tail)
Futurebus+
®
compatible
See the Regulatory Information Appendix (RIA) in
the “RoHS compliance” section of www.3M.com/
interconnects for compliance information
(RIA E1 & C1 apply)
Date Modified: August 21, 2009
TS-1125-B
Sheet 1 of 4
Physical
Insulation:
Material: High Temperature LCP
Flammability: UL 94V-0
Color: Beige
Contact:
Material: Copper Alloy
Plating:
Underplating: 50 μ” [1.27 μm] Nickel
Wiping Area: See Ordering Information
Tails: See Ordering Information
Electrical
Current Rating:
Power: 6.50 A per power socket contact at 70°C
Insulation Resistance:
10
3
MΩ
Withstanding Voltage:
1,500 V
AC
for 60 seconds
Environmental
Temperature Rating:
-55° C to 125° C
Process Temperature Rating:
260°C (Profile per J-STD-020C)
Moisture Sensitivity Level:
1 (per J-STD-020C)
UL File No.: E68080
MetPak is a trademark of 3M Company.
Futurebus+ is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc. (IEEE)
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
MetPak
™
2-FB Power Socket
2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail
11.95
.470
12.45
.490
21.00
.827
MP2 Series
11.80
.465
9.30
.366
"A" TAIL LENGTH
3.00
.118
POSITION 2 POSITION 1
13.50
.531
2.00
.079
TYP.
6.00
.236
2.00
.079
5X
"B"
10.00
.394
9.50
.374
4 ROW PRODUCT
FOR SPECIAL MONOBLOCKS
CONTACT 3M SALES
REPRESENTATIVE
mm
(Inch)
Tolerance Unless Noted
ROW
12.45
.490
11.30
.445
23.00
.906
mm
0
±3
0.0
±0.3
0.00
±0.13
( ) Dimensions used for
Reference Only
D
C
B
A
E
13.80
.543
5 ROW PRODUCT
8.00
.315
Note:
1. Refer to IEC 61076-4-104 Futurebus+
®
global standard.
2. “Press Fit” describes a contact tail having a compliant section designed to make a reliable electrical
connection with a plated through-hole (PTH) in a printed circuit board, typically a “back plane.”
Ordering Information
MP2-SPXX-X1XX- XXXXX
SP = Power Socket
Contact Count
(See Table 1)
Rows
4 = 4 Rows
5 = 5 Rows
Tail Length
(See Table 2)
Plating Options:
(See Table 3)
Termination Style
P = Press-Fit
M = Solder Tail (Press Peg)
S = Solder Tail (Heat Stake)
TS-1125-B
Sheet 2 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
MetPak
™
2-FB Power Socket
2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail
Table 1
Pin Count
08
10
No of Rows
4
5
MP2 Series
Table 2 - Tail & Post Lengths
Contact-to-PC Board Tail
Termination Option No.
Solder
S1
S2
M1
M2
*Compliant-Pin Tail
Table 3 - Plating
Plating Suffix
TG
TG30
Press-Fit Tails*
(RIA E2 & C2 apply)
(RIA E2 & C2 apply)
Solder Tails
RIA E3 & C2 apply
RIA E3 & C2 apply
Plating Composition
0.25 μm [10 μ”] Min. Au Contact Area
2.54 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [50 μ”] Min. Ni all over
0.76 μm [30 μ”] Min. Au Contact Area
2.54 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [50 μ”] Min. Ni all over
0.08 μm [3 μ”] Min. Au Contact Area
0.67 μm [27 μ”] Min. PdNi Contact Area
2.54 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [50 μ”] Min. Ni all over
0.13 μm [5 μ”] Min. Hard Au Contact Area, Lubricated
1.02 μm [40 μ”] Min. PdNi Contact Area
0.10 μm [4 μ”] Min. Pd Contact Area
2.54 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [50 μ”] Min. Ni all over
0.25 μm [10 μ”] Min. Au Contact Area
5.08 μm [200 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
0.76 μm [30 μ”] Min. Au Contact Area
5.08 μm [200 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
1.27 μm [50 μ”] Min. Au Contact Area, Lubricated
5.08 μm [200 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
0.08 μm [3 μ”] Min. Au Contact Area
0.67 μm [27 μ”] Min. PdNi Contact Area
5.08 μm [200 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
0.13 μm [5 μ”] Min. Hard Au Contact Area, Lubricated
1.02 μm [40 μ”] Min. PdNi Contact Area
0.10 μm [4 μ”] Min. Pd Contact Area
5.08 μm [200 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
P1
Press-Fit*
2.72 [0.107]
3.53 [0.139]
2.72 [0.107]
3.53 [0.139]
5.20 [0.205]
6.00 [0.236]
3.57 [0.141]
3.57 [0.141]
Dim. “A”
Dim. “B”
TR30
(RIA E2 & C2 apply)
RIA E3 & C2 apply
TR40B
(RIA E2 & C2 apply)
RIA E3 & C2 apply
FJ
KR
RF
RIA E1 & C1 apply
RIA E1 & C1 apply
RIA E1 & C1 apply
RIA E1 & C1 apply
RIA E1 & C1 apply
RIA E1 & C1 apply
LR
RIA E1 & C1 apply
RIA E1 & C1 apply
PD
*Compliant-Pin Tail
RIA E1 & C1 apply
RIA E1 & C1 apply
TS-1125-B
Sheet 3 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
MetPak
™
2-FB Power Socket
2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail
6.00
.236
4.00
.157
1.00
.039
4.00
.157
2.05
+.05
-.00
+.002
-.000
MP2 Series
2.00
.079
2.00
.079
TYP.
3X
A1
"B"
Ø
0.10
.081
UNPLATED THRU HOLE
UNPLATED THROUGH-HOLE
Ø
Ø
“D” PLATED THROUGH-HOLE
1.50
.059
+.10
-.00
+.004
-.000
Ø
0.10
2.00
.079
4X
8.00
.315
Ø
0.10
3.00
.118
UNPLATED THROUGH-HOLE
Recommended 4 Row PCB Hole
Mounting Pattern
Recommended 5 Row PCB Hole
Mounting Pattern
Table 4 -- HOLE PLATING for TG, TG30, TR30, TR40B FINISHES ONLY
HOLE
“D”
Finished Dia.
mm [in]
0.65-0.80 [.0256-.0315]
Cu Thickness
mm [in]
0.025 [.001] min
SnPb Thickness
microns [µ”]
15 [600] max
Drilled Hole Dia.
mm [in]
0.81-0.86 [.0319-.0339]
Table 5 -- HOLE PLATING for FJ, KR, RF, LR and PD FINISHES ONLY
HOLE
Finished Dia.
mm [in]
0.700-0.800
[.0276-.0315]
Cu Thickness
mm [in]
0.025-0.045
[0.001-0.002]
Immersion Matte
Sn Thickness
microns [μ”]
0.5 - 2.5
[20 - 100]
Electrolitic Au
Thickness
microns [μ”]
0.1 - 0.5
[4 - 20]
OSP ENTEK
Thickness
microns [μ”]
0.2 - 0.5
[8 - 20]
Drilled Hole Dia.
mm [in]
0.830-0.860 [.0330-.0340] or
0.85mm [ #66] TWIST DRILL
“D”
TS-1125-B
Sheet 4 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase.
3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
京公网安备 11010802033920号
EEWORLD
