MTL1N6092 MTL1N6093
MTL1N6094
Hermetic LED Indicators
Features:
•
•
•
•
•
Hermetically sealed
Red, Yellow, Green color choices
Wide Viewing Angle
Panel Mount versions with wire wrappable leads
High-reliability applications
Applications:
•
•
•
•
PC Board Fault Indicator
Logic Status Indicator
Binary Data Display
Power Supply On/Off Indicator
DESCRIPTION:
The
MTL1N6092, MTL1N6093 and MTL1N6094
are hermetically sealed in a T0-46 package. A tinted diffused dome lens provides
good on/off contrast and a wide viewing angle. The MTL1N6092 (red) and MTL1N6093 (yellow) indicators utilize a high efficiency
GaAsP on GaP LED, while the MTL1N6094 indicator utilizes a GaP on GaP LED. Each type uses a colored deffused plastic
lens over a glass window. All versions are available in standard, JAN or JANTX screened levels.
ABSOLUTE MAXIMUM RATINGS
Storage Temperature ...................................................................................................................................................................................... -65°C to +100°C
Operating Temperature ....................................................................................................................................................................................-55°C to +100°C
Reverse Input Voltage ...........................................................................................................................................................................................................5Vdc
Power Dissipation (Derate at the rate of 2.4 mW/°C above 50°C) ...................................................................................................................120mW
Forward Current-Continuous............................................................................................................................................................................................... 35mA
Lead Solder Temperature (1/16” (1.6mm) from case for 10 seconds max.) .................................................................................................. 260°C
RECOMMENDED OPERATING CONDITIONS:
SYMBOL
MIN
MAX
I
F
20
35
T
A
-65
100
PARAMETER
Forward
Operating Temperature
UNITS
mA
°
C
SELECTION GUIDE
PART NUMBER
MTL1N6092.001X
MTL1N6092.002X
MTL1N6092.003X
MTL1N6092.004X
MTL1N6093.001X
MTL1N6093.002X
MTL1N6093.003X
MTL1N6093.004X
MTL1N6094.001X
MTL1N6094.002X
MTL1N6094.003X
MTL1N6094.004X
PART DESCRIPTIO
N
Light Emitting Diode
Light Emitting Diode
Light Emitting Diode
Light Emitting Diode
Light Emitting Diode
Light Emitting Diode
Light Emitting Diode
Light Emitting Diode
Light Emitting Diode
Light Emitting Diode
Light Emitting Diode
Light Emitting Diode
HIGH RELIABILITY
Commercial (0
°
to +70
°
C operating temperature range)
Commercial (-40
°
to +85
°
C operating temperature range)
Commercial (-55
°
to 100
°
C operating temperature range)
Screened to JANTX level (-55
°
to 100
°
C operating temperature range)
Commercial (0
°
to +70
°
C operating temperature range)
Commercial (-40
°
to +85
°
C operating temperature range)
Commercial (-55
°
to 100
°
C operating temperature range)
Screened to JANTX level (-55
°
to 100
°
C operating temperature range)
Commercial (0
°
to +70
°
C operating temperature range)
Commercial (-40
°
to +85
°
C operating temperature range)
Commercial (-55
°
to 100
°
C operating temperature range)
Screened to JANTX level (-55
°
to 100
°
C operating temperature range)
NOTE: X at end of part number represents lead finish. Replace with A for gold and S for solder.
MINCO TECHNOLOGY LABS INC
♦
1805 Rutherford Lane Austin TX 78754♦TEL: 512 834 2022♦FAX: 512 837 6285
京公网安备 11010802033920号
EEWORLD
