HCPL-2530, HCPL-2531, HCPL-4534
HCPL-0530, HCPL-0531, HCPL-0534
Dual Channel, High Speed Optocouplers
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
These dual channel optocouplers contain a pair of light
emitting diodes and integrated photo-detectors with
electrical insulation between input and output. Separate
connection for the photodiode bias and output transis-
tor collectors increase the speed up to a hundred times
that of a conventional phototransistor coupler by
reducing the base-collector capacitance.
These dual channel optocouplers are available in an 8
Pin DIP and in an industry standard SO-8 package. The
following is a cross reference table listing the 8 Pin DIP
part number and the electrically equivalent SO-8 part
number.
SO-8
Package
HCPL-0530
HCPL-0531
HCPL-0534
Features
•
15 kV/μs minimum common mode transient immunity
at V
CM
= 1500 V (HCPL-4534/0534)
•
TTL compatible
•
Available in 8 pin DIP, SO-8, and 8 pin DIP – gull wing
surface mount (option 020) packages
•
High density packaging
•
3 MHz bandwidth
•
Open collector outputs
•
Safety approval
UL Recognized – 3750 V rms for 1 minute (5000 V rms
for 1 minute for Option 020) per UL1577
CSA Approved
IEC/EN/DIN EN 60747-5-2
– V
IORM
= 630 Vpeak for HCPL-2530/2531/4534
0ption 060
– V
IORM
= 560 Vpeak for HCPL-0530/0531/0534
0ption 060
•
Single channel version available (4502/3, 0452/3)
•
MIL-PRF-38534 hermetic version available
(55XX/65XX/4N55)
8 Pin DIP
HCPL-2530
HCPL-2531
HCPL-4534
Functional Diagram
ANODE
1
1
CATHODE
1
2
CATHODE
2
3
ANODE
2
4
8 V
CC
7 V
O1
6 V
O2
5 GND
TRUTH TABLE
(POSITIVE LOGIC)
LED
V
O
LOW
ON
HIGH
OFF
Applications
•
Line receivers – high common mode transient immu-
nity (>1000 V/μs) and low input-output capacitance
(0.6 pF)
•
High speed logic ground isolation – TTL/TTL, TTL/LTTL,
TTL/CMOS, TTL/LSTTL
•
Replace pulse transformers – save board space and
weight
•
Analog signal ground isolation – integrated photon
detector provides improved linearity over phototran-
sistor type
•
Polarity sensing
•
Isolated analog amplifier – dual channel packaging
enhances thermal tracking
A 0.1
μF
bypass capacitor between
pins 5 and 8 is recommended.
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
The SO-8 does not require “through holes” in a PCB.
This package occupies approximately one-third the
footprint area of the standard dual-in-line package. The
lead profile is designed to be compatible with standard
surface mount processes.
The HCPL-2530/0530 is for use in TTL/CMOS, TTL/LSTTL
or wide bandwidth analog applications. Current transfer
ratio (CTR) for the HCPL-2530/0530 is 7% minimum at I
F
= 16 mA.
The HCPL-2531/0531 is designed for high speed TTL/TTL
applications. A standard 16 mA TTL sink current through
the input LED will provide enough output current for 1
TTL load and a 5.6 kΩ pull-up resistor. CTR of the HCPL-
2531/0531 is 19% minimum at I
F
= 16 mA.
The HCPL-4534/0534 is an HCPL-2531/0531 with
increased common mode transient immunity of 15,000
V/μs minimum at V
CM
= 1500 V guaranteed.
Selection Guide
Minimum CMR
dV/dt
(V/μs)
1,000
8-pin DIP (300 Mil)
Current
Transfer
Ratio (%)
7
19
Small-Outline SO-8
Dual
Channel
Package
HCPL-0530
HCPL-0531
HCPL-0534
Widebody
(400 Mil)
Single
Channel
Package*
HCNW135
HCNW136
HCNW4502
HCNW4503
Hermetic
Single and
Dual Channel
Packages*
V
CM
(V)
10
Dual
Channel
Package
HCPL-2530
HCPL-2531
HCPL-4534
Single
Channel
Package*
6N135
6N136
HCPL-4502
HCPL-4503
Single
Channel
Package*
HCPL-0500
HCPL-0501
HCPL-0452
HCPL-0453
15,000
1,000
1500
10
19
9
HCPL-55XX
HCPL-65XX
4N55
* Technical data for these products are on separate Avago publications.
2
Ordering Information
HCPL-2530, HCPL-2531, HCPL-4534, HCPL-0530, HCPL-0531 and HCPL-0534 are UL Recognized with 3750 Vrms for
1 minute per UL1577 and are approved under CSA Component Acceptance Notice #5, File CA 88324.
Option
Part
number
RoHS
Compliant
-000E
-300E
-500E
HCPL-2530
HCPL-2531
HCPL-4534
-020E
-320E
-520E
-060E
-360E
-560E
HCPL-0530
HCPL-0531
HCPL-0534
-000E
-500E
Non RoHS
Compliant
No option
-300
-500
-020
-320
-520
-060
-360
-560
No option
-500
Package
Surface
Mount
X
X
Gull
Wing
X
X
X
X
X
X
Tape
& Reel
UL 5000
Vrms/
1 Minute
rating
IEC/EN/DIN
EN 60747-5-2 Quantity
50 per tube
50 per tube
X
X
X
X
X
X
X
X
X
1000 per reel
50 per tube
50 per tube
1000 per reel
50 per tube
50 per tube
1000 per reel
100 per tube
300mil
DIP-x
X
X
X
X
SO-8
X
X
X
1500 per reel
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry.
Example 1:
HCPL-2530-560E to order product of 300mil DIP Gull Wing Surface Mount package in Tape and Reel packaging
with IEC/EN/DIN EN 60747-5-2 Safety Approval in RoHS compliant.
Example 2:
HCPL-2530 to order product of 300mil DIP package in tube packaging and non RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
Remarks: The notation ‘#XXX’ is used for existing products, while (new) products launched since 15th July 2001 and
RoHS compliant option will use ‘-XXXE‘.
3
Schematic
1
+
V
F1
–
2
I
F1
I
CC
8
V
CC
I
O1
7
V
O1
3
–
V
F2
+
4
I
F2
I
O2
6
V
O2
GND
5
HCPL-4534/0534 SHIELD
USE OF A 0.1 μF BYPASS CAPACITOR CONNECTED
BETWEEN PINS 5 AND 8 IS RECOMMENDED.
Package Outline Drawings
8-Pin DIP Package (HCPL-2530/2531/4534)
9.65 ± 0.25
(0.380 ± 0.010)
TYPE NUMBER
8
7
6
5
7.62 ± 0.25
(0.300 ± 0.010)
6.35 ± 0.25
(0.250 ± 0.010)
OPTION CODE*
DATE CODE
A XXXXZ
YYWW RU
1
1.19 (0.047) MAX.
2
3
4
UL
RECOGNITION
1.78 (0.070) MAX.
+ 0.076
0.254 - 0.051
+ 0.003)
(0.010 - 0.002)
5° TYP.
3.56 ± 0.13
(0.140 ± 0.005)
4.70 (0.185) MAX.
0.51 (0.020) MIN.
2.92 (0.115) MIN.
DIMENSIONS IN MILLIMETERS AND (INCHES).
*MARKING CODE LETTER FOR OPTION NUMBERS.
"V" = OPTION 060
OPTION NUMBERS 300 AND 500 NOT MARKED.
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
1.080 ± 0.320
(0.043 ± 0.013)
0.65 (0.025) MAX.
2.54 ± 0.25
(0.100 ± 0.010)
4
Package Outline Drawings, continued
8-Pin DIP Package with Gull Wing Surface Mount Option 300 (HCPL-2530/2531/4534)
LAND PATTERN RECOMMENDATION
9.65 ± 0.25
(0.380 ± 0.010)
8
7
6
5
1.016 (0.040)
6.350 ± 0.25
(0.250 ± 0.010)
10.9 (0.430)
1
2
3
4
1.27 (0.050)
2.0 (0.080)
1.19
(0.047)
MAX.
1.780
(0.070)
MAX.
9.65 ± 0.25
(0.380 ± 0.010)
7.62 ± 0.25
(0.300 ± 0.010)
+ 0.076
0.254 - 0.051
+ 0.003)
(0.010 - 0.002)
3.56 ± 0.13
(0.140 ± 0.005)
1.080 ± 0.320
(0.043 ± 0.013)
0.635 ± 0.130
2.54
(0.025 ± 0.005)
(0.100)
BSC
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES).
0.635 ± 0.25
(0.025 ± 0.010)
12° NOM.
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
Small Outline SO-8 Package (HCPL-0530/0531/0534)
LAND PATTERN RECOMMENDATION
8
7
6
5
3.937 ± 0.127
(0.155 ± 0.005)
XXX
YWW
5.994 ± 0.203
(0.236 ± 0.008)
TYPE NUMBER
(LAST 3 DIGITS)
DATE CODE
4
7.49 (0.295)
1
2
3
1.9 (0.075)
1.270 BSC
(0.050)
7°
0.406 ± 0.076
(0.016 ± 0.003)
0.64 (0.025)
* 5.080 ± 0.127
(0.200 ± 0.005)
45° X
0.432
(0.017)
3.175 ± 0.127
(0.125 ± 0.005)
1.524
(0.060)
0.203 ± 0.102
(0.008 ± 0.004)
0.228 ± 0.025
(0.009 ± 0.001)
* TOTAL PACKAGE LENGTH (INCLUSIVE OF MOLD FLASH)
5.207 ± 0.254 (0.205 ± 0.010)
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES) MAX.
0.305 MIN.
(0.012)
NOTE: FLOATING LEAD PROTRUSION IS 0.15 mm (6 mils) MAX.
5
京公网安备 11010802033920号
EEWORLD
