DY-HIR323C

On July 24, 2012, Qualcomm of the United States and Renault of France announced that the two parties had signed a memorandum of understanding on the development of wireless charging technology for ...[Details]

How to Minimize the Number, and Size, of Output Capacitors in Your Power Supply Design How to Minimize the Number and Size of Output Capacitors in Power Supply Designs ...[Details]

　　This paper introduces the design schemes of the two most commonly used unipolar and bipolar drive circuits for BYG general series two-phase stepper motors. The control method of two-phase stepper m...[Details]

The power supply test market has always played an important role in the measurement market and has attracted the investment of many measurement instrument manufacturers. In order to consolidate its...[Details]

Each battery structure has its inherent advantages and disadvantages. Automotive OEMs need to analyze and determine which architecture is more suitable for their production model while ...[Details]

question Is there an easy way to protect a power supply design from failure? answer Yes, integrated circuits such as MAX17613 and MAX17526 can be used. Introduction Uptime is a key metr...[Details]

　　The main idea of ​​the design: Regardless of any telephone, the DC resistance in the off-hook state should be ≤300Ω, and the DC resistance in the off-hook state of an electronic telephone with an "...[Details]

1. LED pin forming method 1 The bracket must be bent 2 mm away from the colloid. 2 The bracket forming must be done with a fixture or by professionals. 3 The bracket forming must be com...[Details]

CAN (Controller Area Network) bus, also known as control area network, is a multi-master serial communication protocol that can effectively support distributed real-time control with a high level o...[Details]

In some audio circuits, operational amplifier circuits, electronic clock circuits and other circuits, dual power supplies (i.e. positive and negative power supplies) are required. Using a three-termin...[Details]

Standby refers to the state when the product is connected to the power supply but is not running its main function. The purpose of standby is to reduce the power loss when it is unloaded or light...[Details]

Abstract: The basic principle of repetitive controller is introduced, the influence of a key parameter in repetitive controller on the steady-state error and convergence speed of the system is desc...[Details]

Power supply designers often face conflicting demands. On the one hand, they need to reduce size and cost, while on the other hand, they need to provide more functions and increase output ...[Details]

A constant current source is a power source that can provide a constant current to a load, also known as a steady current source or current source. At present, the application of CNC constant curr...[Details]

The use of vias in the routing path is a very important issue for any high-speed transmission technology because it will generate electromagnetic interference and crosstalk. In addition, there must ...[Details]