To learn more about onsemi™, please visit our website at
www.onsemi.com
onsemi
and and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or
subsidiaries in the United States and/or other countries.
onsemi
owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of
onsemi
product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf.
onsemi
reserves the right to make changes at any time to any products or information herein, without
notice. The information herein is provided “as-is” and
onsemi
makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality,
or suitability of its products for any particular purpose, nor does
onsemi
assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all
liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using
onsemi
products, including compliance with all laws,
regulations and safety requirements or standards, regardless of any support or applications information provided by
onsemi.
“Typical” parameters which may be provided in
onsemi
data sheets and/
or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application
by customer’s technical experts.
onsemi
does not convey any license under any of its intellectual property rights nor the rights of others.
onsemi
products are not designed, intended, or authorized
for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for
implantation in the human body. Should Buyer purchase or use
onsemi
products for any such unintended or unauthorized application, Buyer shall indemnify and hold
onsemi
and its officers, employees,
subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that
onsemi
was negligent regarding the design or manufacture of the part.
onsemi
is an Equal Opportunity/Affirmative
Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others.
MOCD207M, MOCD208M,
MOCD211M, MOCD213M,
MOCD217M
8-pin SOIC Dual-Channel
Phototransistor Output
Optocoupler
These devices consist of two gallium arsenide infrared emitting
diodes optically coupled to two monolithic silicon phototransistor
detectors, in a surface mountable, small outline, plastic package. They
are ideally suited for high−density applications, and eliminate the need
for through−the−board mounting.
Features
www.onsemi.com
•
Closely Matched Current Transfer Ratios
•
Minimum BV
CEO
of 70 V Guaranteed
•
•
•
•
•
– MOCD207M, MOCD208M, MOCD213M
Minimum BV
CEO
of 30 V Guaranteed
– MOCD211M, MOCD217M
Low LED Input Current Required for Easier Logic Interfacing
– MOCD217M
Convenient Plastic SOIC−8 Surface Mountable Package Style, with
0.050″ Lead Spacing
Safety and Regulatory Approvals:
– UL1577, 2,500 VAC
RMS
for 1 Minute
– DIN−EN/IEC60747−5−5, 565 V Peak Working Insulation Voltage
These are Pb−Free Devices
SOIC8
M SUFFIX
CASE 751DZ
MARKING DIAGRAM
1
D207
V
X YY S
2
6
Applications
•
Feedback Control Circuits
•
Interfacing and Coupling Systems of Different Potentials and
Impedances
•
General Purpose Switching Circuits
•
Monitor and Detection Circuits
ANODE 1 1
3
4
5
8 COLLECTOR 1
1
−
Logo
2
−
Device Number
3
−
DIN EN/IEC60747−5−5 Option (only appears
on component ordered with this option)
4
−
One−Digit Year Code, e.g., “4”
5
−
Digit Work Week, Ranging from “01” to “53”
6
−
Assembly Package Code
CATHODE 1 2
ANODE 2 3
7 EMITTER 1
6 COLLECTOR 2
ORDERING INFORMATION
See detailed ordering and shipping information in the package
The load is an LED, the voltage is 5.5-7.5v, the current is 50mA. The power supply is a 3.7V-4.2V lithium battery. There is a button on the board, press it once to turn it on, press it again to turn i...
[size=4]PLL can be used to provide chip clock, which is controlled by PLLSTAT (PLL status register), which is controlled by the 9th bit and is used to read the connection bit of PLL. When the 8th bit ...
I am studying operational amplifiers recently. If a single power supply is used, there should be no negative half-cycle after the AC signal is input and amplified. However, why is there a negative hal...
In order to adapt to the increasingly prominent electromagnetic interference problems and the mandatory implementation of electromagnetic compatibility standards, and to meet the needs of electrical i...
Power technology
京公网安备 11010802033920号
EEWORLD
